Checking policy for deteriorating multistate systems

In this article a multistate system under some checking policy is considered. The system has n + 1 states: 0,1, …,n, and deteriorates gradually. State 0 is a normal (full capacity) state and states 1, …,n are considered unsatisfactory. Transition from state 0 to state 1 is considered a system failure. This failure can be detected only through checking, which entails a fixed cost c. The holding time in the undiscovered state i (i = 1, …,n) results in cost d_i per unit of time. For such a system, the algorithm of determining optimum checking times is given.     

Single-machine scheduling to minimize absolute deviation of completion times from a common due date

The article considers a single-machine n-job scheduling problem to minimize the sum of absolute lateness given a common due date. Two models are defined depending on whether the start time t₀ of schedules is arbitrary or fixed. Conditions are provided when those two models coincide. The developed branch-and-bound procedure is tested on nine known examples from the literature (6 ⩽ n ⩽ 14) and 90 medium-size random problems (15 ⩽ n ⩽ 25) with a fixed t₀.     

The asymptotic joint distribution of the state occupancy times in an alternating renewal process

An alternating renewal process starts at time zero and visits states 1,2,…,r, 1,2, …,r 1,2, …,r, … in sucession. The time spent in state i during any cycle has cumulative distribution function F_i, and the sojourn times in each state are mutually independent, positive and nondegenerate random variables. In the fixed time interval [0,T], let U_i(T) denote the total amount of time spent in state i. In this note, a central limit theorem is proved for the random vector (U_i(T), 1 ≤ i ≤ r) (properly normed and centered) as T → ∞.     

Asymptotic inference about a density function at an end of its range

For each n, X₁(n),…X_n(n) are independent and identically distributed random variables, with common probability density function Where c, θ, α, and r(y) are all unknown. It is shown that we can make asymptotic inferences about c, θ, and α, when r(y) satisfies mild conditions.     

Optimal selection of the t best of a sequence with sampling cost

This article deals with the problem of selecting the t best of n independent and identically distributed random variables which are observed sequentially with sampling cost c per unit. Assume that a decision for acceptance or rejection must be made after each sampling and that the reward for each observation with value x is given by px - c, where p is 1 if the observation is accepted, or 0 otherwise. The optimal decision procedure (strategy) for maximizing the total expected reward is obtained. The critical numbers which are necessary to carry out the optimal decision procedure is presented by two recursive equations. The limit values of the critical numbers and the expected sample size are also studied.     

A note on a prediction interval for a first-order Gauss Markov process

Let X_t, t = 1,2, ?, be a stationary Gaussian Markov process with E(X_t) = μ and Cov(X_t, X_t+k) = σ²ρ^k. We derive a prediction interval for X_2n+1 based on the preceding 2n observations X₁,X₂, ?,X_2n.     

Characterizations of the exponential distribution by higher-order gap

Suppose X₁,X₂, ?,X_n is a random sample of size n from a continuous distribution function F(x) and let X_1,n, ≦ X_2,n ≦ ? ≦ X_n,n be the corresponding order statistics. We define the jth-order gap g_i,j as g_i,j = X_i+j,n ? X_i,n, 1 ≦ i < n, 1 ≦ j ≦ n ? i. In this article characterizations of the exponential distribution are given by considering the distributional properties of g_k,n-k, 1 ≦ k ≦ n.     

On the conditional residual lifetime of coherent systems under double regularly checking

In this paper, we consider a coherent system with n independent and identically distributed components under the condition that the system is monitored at time instances t₁ and t₂ (t₁ < t₂). First, various mixture representations for reliability function of the conditional residual lifetime of the coherent system are derived under different scenarios at times t₁ and t₂ (t₁ < t₂). Several stochastic comparisons between two systems are also made based on the proposed conditional random variables. Then, we consider the conditional residual lifetime of the functioning components of the system given that j components have failed at time t₁ and the system has failed at time t₂. Some stochastic comparisons on the proposed conditional residual lifetimes are investigated. Several illustrative graphs and examples are also provided.     

A decomposable transshipment algorithm for a multiperiod transportation problem

A dynamic version of the transportation (Hitchcock) problem occurs when there are demands at each of n sinks for T periods which can be fulfilled by shipments from m sources. A requirement in period t₂ can be satisfied by a shipment in the same period (a linear shipping cost is incurred) or by a shipment in period t₁ < t₂ (in addition to the linear shipping cost a linear inventory cost is incurred for every period in which the commodity is stored). A well known method for solving this problem is to transform it into an equivalent single period transportation problem with mT sources and nT sinks. Our approach treats the model as a transshipment problem consisting of T, m source — n sink transportation problems linked together by inventory variables. Storage requirements are proportional to T² for the single period equivalent transportation algorithm, proportional to T, for our algorithm without decomposition, and independent of T for our algorithm with decomposition. This storage saving feature enables much larger problems to be solved than were previously possible. Futhermore, we can easily incorporate upper bounds on inventories. This is not possible in the single period transportation equivalent.     

Applications of renewal theory in analysis of the free-replacement warranty

Under a free-replacement warranty of duration W, the customer is provided, for an initial cost of C, as many replacement items as needed to provide service for a period W. Payments of C are not made at fixed intervals of length W, but in random cycles of length Y = W + γ(W), where γ(W) is the (random) remaining life-time of the item in service W time units after the beginning of a cycle. The expected number of payments over the life cycle, L, of the item is given by M_Y(L), the renewal function for the random variable Y. We investigate this renewal function analytically and numerically and compare the latter with known asymptotic results. The distribution of Y, and hence the renewal function, depends on the underlying failure distribution of the items. Several choices for this distribution, including the exponential, uniform, gamma and Weibull, are considered.     

On the first time a separately maintained parallel system has been down for a fixed time

Consider a system consisting of n separately maintained independent components where the components alternate between intervals in which they are “up” and in which they are “down”. When the i^th component goes up [down] then, independent of the past, it remains up [down] for a random length of time, having distribution F_i[G_i], and then goes down [up]. We say that component i is failed at time t if it has been “down” at all time points s ?[t-A.t]: otherwise it is said to be working. Thus, a component is failed if it is down and has been down for the previous A time units. Assuming that all components initially start “up,” let T denote the first time they are all failed, at which point we say the system is failed. We obtain the moment-generating function of T when n = l, for general F and G, thus generalizing previous results which assumed that at least one of these distributions be exponential. In addition, we present a condition under which T is an NBU (new better than used) random variable. Finally we assume that all the up and down distributions F_i and G_i i = l,….n, are exponential, and we obtain an exact expression for E(T) for general n; in addition we obtain bounds for all higher moments of T by showing that T is NBU.     

IFR results for repairable systems

Consider a k-out-of-n system with independent repairable components. Assume that the repair and failure distributions are exponential with parameters {μ₁, ?,μ_n} and {λ₁, ?,λ_n}, respectively. In this article we show that if λ_i – μ_i = Δ for all i then the life distribution of the system is increasing failure rate (IFR).     

A stochastic linear knapsack problem

In this article we consider a stochastic version of the continuous linear knapsack problem, i.e., a model with a random linear constraint, and provide an efficient algorithm for solving it. An original problem P_o is first transformed into a deterministic equivalent problem P_o. Furthermore, by a change of variables, P_o is transformed into P. Then, in order to solve P, a subproblem P(μ.) with positive parameter μ is introduced, and a close relation between P and P(μ) is clarified. Furthermore, an auxiliary problem P^R(μ) of P(μ) with positive parameter R is introduced, and a relation between P^R(μ) and P(μ) is also clarified. From these relations, a direct relation connecting P^R(μ) with P is derived. An efficient algorithm based on this relation for solving P is proposed. It is shown that time complexity of the algorithm is O(n log n), where n is the number of items. Finally, some further research problems are discussed.     

Scheduling with earliest start and due date constraints on multiple machines

We consider the scheduling of n jobs on m identical machines when the jobs become available for processing at ready times a_i, a_i, ? 0, require d_i time units for processing and must be completed by times b_i for i = 1, 2, … n. The objective chosen is that of minimizing the total elapsed time to complete all jobs subject to the ready time and due date constraints, preemption is not allowed. We present a multi-stage solution algorithm for this problem that is based on an implicit enumeration procedure and also uses the labelling type algorithm which solves the problem when preemption is allowed.     

Estimating component characteristics from system failure‐time data

Suppose that failure times are available from a random sample of N systems of a given, fixed design with components which have i.i.d. lifetimes distributed according to a common distribution F. The inverse problem of estimating F from data on observed system lifetimes is considered. Using the known relationship between the system and component lifetime distributions via signature and domination theory, the nonparametric maximum likelihood estimator _N(t) of the component survival function (t) is identified and shown to be accessible numerically in any application of interest. The asymptotic distribution of _N(t) is also identified, facilitating the construction of approximate confidence intervals for (t) for N sufficiently large. Simulation results for samples of size N = 50 and N = 100 for a collection of five parametric lifetime models demonstrate the utility of the recommended estimator. Possible extensions beyond the i.i.d. framework are discussed in the concluding section. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Inventory policies for a make‐to‐order system with a perishable component and fixed ordering cost

We consider a make‐to‐order production system where two major components, one nonperishable (referred to as part 1) and one perishable (part 2), are needed to fulfill a customer order. In each period, replenishment decisions for both parts need to be made jointly before demand is realized and a fixed ordering cost is incurred for the nonperishable part. We show that a simple (s_n,S,S) policy is optimal. Under this policy, S along with the number of backorders at the beginning of a period if any and the availability of the nonperishable part (part 1) determines the optimal order quantity of the perishable part (part 2), while (s_n,S) guide when and how much of part 1 to order at each state. Numerical study demonstrates that the benefits of using the joint replenishment policy can be substantial, especially when the unit costs are high and/or the profit margin is low. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

A compound measure of dependability for systems modeled by continuous-time absorbing Markov processes

The Markov analysis of reliability models frequently involves a partitioning of the state space into two or more subsets, each corresponding to a given degree of functionality of the system. A common partitioning is G ∪ B ∪ {o}, where G (good) and B (bad) stand, respectively, for fully and partially functional sets of system states; o denotes system failure. Visits to B may correspond to, for instance, reparable system downtimes, whereas o will stand for irrecoverable system failure. Let T_G and N_B stand, respectively, for the total time spent in G, and the number of visits to B, until system failure. Both T_G and N_B are familiar system performance measures with well-known cumulative distribution functions. In this article a closed-form expression is established for the probability Pr[T_G <> t, N_B ≤ n], a dependability measure with much intuitive appeal but which hitherto seems not to have been considered in the literature. It is based on a recent result on the joint distribution of sojourn times in subsets of the state space by a Markov process. The formula is explored numerically by the example of a power transmission reliability model. © 1996 John Wiley & Sons, Inc.     

On estimating population characteristics from record-breaking observations. i. parametric results

Consider an experiment in which only record-breaking values (e.g., values smaller than all previous ones) are observed. The data available may be represented as X₁,K₁,X₂,K₂, …, where X₁,X₂, … are successive minima and K₁,K₂, … are the numbers of trials needed to obtain new records. We treat the problem of estimating the mean of an underlying exponential distribution, and we consider both fixed sample size problems and inverse sampling schemes. Under inverse sampling, we demonstrate certain global optimality properties of an estimator based on the “total time on test” statistic. Under random sampling, it is shown than an analogous estimator is consistent, but can be improved for any fixed sample size.     

Discrete repairable reliability systems

Consider a reliability system consisting of n components. The failures and the repair completions of the components can occur only at positive integer-valued times k ϵ N₊₊ ϵ (1, 2, …). At any time k ϵ N₊₊ each component can be in one of two states: up (i.e., working) or down (i.e., failed and in repair). The system state is also either up or down and it depends on the states of the components through a coherent structure function τ. In this article we formulate mathematically the above model and we derive some of its properties. In particular, we identify conditions under which the first failure times of two such systems can be stochastically ordered. A variety of special cases is used in order to illustrate the applications of the derived properties of the model. Some instances in which the times of first failure have the NBU (new better than used) property are pointed out. © 1993 John Wiley & Sons, Inc.