An approximation to the stationary distribution of a multiechelon repairable-item inventory system with finite sources and repair channels

We consider a multiechelon repairable-item inventory system where several bases are supported by a central depot. Unlike METRIC-based models, there are only a finite number of repairmen at each base and the depot, and the failure rates at the bases depend on the current number of items online. The principal objective of this article is to develop a quick and accurate approximation to the steady-state distribution of this system. A secondary objective is to compare the solution of this system with a comparable METRIC solution.     

On the solution of a stochastic bottleneck assignment problem and its variations

In this article, we study the stochastic version of the so-called bottleneck assignment problem. Our primary objective is to maximize the probability that the bottleneck value satisfies a specified target. Under general stochastic assumptions, we show that the solution in this case is easily obtained by solving a linear assignment problem. We next examine the situation where the target is to be minimized, given that the probability of satisfying the target exceeds a specified threshold. Finally, we address extensions to the original problem where a second objective is also considered.     

Solving time/cost trade-off problems with discounted cash flows using generalized benders decomposition

In this article we consider a project scheduling problem where there are cash flows throughout the life of the project and where shorter activity durations can be attained by incurring greater direct costs. In particular, the objective of this problem is to determine the activity durations and a schedule of activity start times so that the net present value of cash flows is maximized. We formulate this problem as a mixed-integer nonlinear program which is amenable to solution using the generalized Benders decomposition technique developed by Geoffrion. We test the algorithm on 140 project scheduling problems, the largest of which contains 30 nodes and 64 activities. Our computational results are quite encouraging inasmuch as 123 of the 140 problems require less than 1 CPU second of solution time. © 1993 John Wiley & Sons, Inc.     

Optimality conditions for the bilevel programming problem

The bilevel programming problem (BLPP) is a sequence of two optimization problems where the constraint region of the first is determined implicitly by the solution to the second. In this article it is first shown that the linear BLPP is equivalent to maximizing a linear function over a feasible region comprised of connected faces and edges of the original polyhedral constraint set. The solution is shown to occur at a vertex of that set. Next, under assumptions of differentiability, first-order necessary optimality conditions are developed for the more general BLPP, and a potentially equivalent mathematical program is formulated. Finally, the relationship between the solution to this problem and Pareto optimality is discussed and a number of examples given.     

Some games of search on a lattice

In this article we shall deal with some two-person games on a lattice. These are games of search and ambush where the set of strategies of one of the players is determined by functions on the lattice. We give a general method to obtain a solution of these games and we apply it to three particular games. © 1993 John Wiley & Sons, Inc.     

A primal-dual algorithm for the dynamic lotsizing problem with joint set-up costs

In this article the multi-item dynamic lotsizing problem with joint set-up costs (LPJS) is considered. A tight formulation of the problem and the dual of the linear relaxation of this formulation is presented. A procedure to solve this dual problem is developed where the solution provides a strong lower bound for the LPJS. This lower bound is used in a branch and bound procedure to find an optimal solution to the problem. The extensive computational experiments with this procedure revealed that it outperforms the other available branch and bound algorithm in the literature. With the proposed algorithm the average time requirement was about 113 seconds on a 486DX33 processor for solving a difficult class of LPJS problems that have 50 items and 24 periods. © 1995 John Wiley & Sons, Inc.     

An optimum group maintenance policy

In this article we present an optimum maintenance policy for a group of machines subject to stochastic failures where the repair cost and production loss due to the breakdown of machines are minimized. A nomograph was developed for machines with exponential failure time distributions. The optimal schedule time for repair as well as the total repair cost per cycle can be obtained easily from the nomograph. Conditions for the existence of a unique solution for the optimum schedule and the bounds for the schedule are discussed.     

Optimal resource allocation and redistribution strategy in military conflicts with Lanchester square law attrition

We address the problem of optimal decision‐making in conflicts based on Lanchester square law attrition model where a defending force needs to be partitioned optimally, and allocated to two different attacking forces of differing strengths and capabilities. We consider a resource allocation scheme called the Time Zero Allocation with Redistribution (TZAR) strategy, where allocation is followed by redistribution of defending forces, on the occurrence of certain decisive events. Unlike previous work on Lanchester attrition model based tactical decision‐making, which propose time sequential tactics through an optimal control approach, the present article focuses on obtaining simpler resource allocation tactics based on a static optimization framework, and demonstrates that the results obtained are similar to those obtained by the more complex dynamic optimal control solution. Complete solution for this strategy is obtained for optimal partitioning of resources of the defending forces. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

An analytical evaluation of optimal solution value estimation procedures

The estimation of optimal solution values for large-scale optimization problems is studied. Optimal solution value estimators provide information about the deviation between the optimal solution and the heuristic solution. Some estimation techniques combine heuristic solutions with randomly generated solutions. In particular, we examine a class of jacknife-based estimators which incorporate any heuristic solution value with the two best randomly generated solution values. The primary contribution of this article is that we provide a framework to analytically evaluate a class of optimal solution value estimators. We present closed-form results on the relationship of heuristic performance, sample size, and the estimation errors for the case where the feasible solutions are uniformly distributed. In addition, we show how to compute the estimation errors for distributions other than uniform given a specific sample size. We use a triangular and an exponential distribution as examples of other distributions. A second major contribution of this article is that, to a large extent, our analytical results confirm previous computational results. In particular, the best estimator depends on how good the heuristic is, but seems to be independent of the underlying distribution of solution values. Furthermore, there is essentially an inverse relationship between the heuristic performance and the performance of any estimator. © 1994 John Wiley & Sons, Inc.     

Robust shortest path planning and semicontractive dynamic programming

In this article, we consider shortest path problems in a directed graph where the transitions between nodes are subject to uncertainty. We use a minimax formulation, where the objective is to guarantee that a special destination state is reached with a minimum cost path under the worst possible instance of the uncertainty. Problems of this type arise, among others, in planning and pursuit‐evasion contexts, and in model predictive control. Our analysis makes use of the recently developed theory of abstract semicontractive dynamic programming models. We investigate questions of existence and uniqueness of solution of the optimality equation, existence of optimal paths, and the validity of various algorithms patterned after the classical methods of value and policy iteration, as well as a Dijkstra‐like algorithm for problems with nonnegative arc lengths.© 2016 Wiley Periodicals, Inc. Naval Research Logistics 66:15–37, 2019     

Maximizing project cash availability

Consider a project during the life cycle of which there are cash payouts and in‐flows. To better meet his financial commitments, the project owner would like to meet all deadlines without running out of cash. We show that the cash availability objective is similar to the total weighted flowtime used to measure work‐in‐progress performance in the scheduling and inventory control literatures. In this article we provide several specialized solution methods for the problem of minimizing total weighted flowtime in an arbitrary acyclic project network, subject to activity release times and due dates, where the activity weights may be positive or negative and represent cash in‐ and out‐flows. We describe the structure of an optimal solution and provide several efficient algorithms and their complexity based on mincost and maxflow formulations. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

An approach to modeling electric utility capacity expansion planning

This article describes an algorithm for solving the static electric utility capacity expansion problem. The advantages of this algorithm are twofold. First, it is simpler and yet more efficient than previous algorithms for the same problem. Second, by making simplifying but realistic assumptions on plant sizes it is possible to use this algorithm for the case where one does not allow fractional plant additions. While the model has n variables, it has a clear two-dimensional geometric representation for understanding its properties, developing an algorithm, and interpreting the optimal solution. This algorithm has been implemented in the Intermediate Future Forecasting (IFFS) capacity expansion model at the Department of Energy.     

Batch scheduling with step‐deteriorating processing times to minimize flowtime

Both topics of batch scheduling and of scheduling deteriorating jobs have been very popular among researchers in the last two decades. In this article, we study a model combining these two topics. We consider a classical batch scheduling model with unit‐jobs and batch‐independent setup times, and a model of step‐deterioration of processing times. The objective function is minimum flowtime. The optimal solution of the relaxed version (allowing non‐integer batch sizes) is shown to have a unique structure consisting of two consecutive decreasing arithmetic sequences of batch sizes. We also introduce a simple and efficient rounding procedure that guarantees integer batch sizes. The entire solution procedure requires an effort of O(n) (where nis the number of jobs.) © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Stochastic call center staffing with uncertain arrival,service and abandonment rates: A Bayesian perspective

In this article, we introduce staffing strategies for the Erlang‐A queuing system in call center operations with uncertain arrival, service, and abandonment rates. In doing so, we model the system rates using gamma distributions that create randomness in operating characteristics used in the optimization formulation. We divide the day into discrete time intervals where a simulation based stochastic programming method is used to determine staffing levels. More specifically, we develop a model to select the optimal number of agents required for a given time interval by minimizing an expected cost function, which consists of agent and abandonment (opportunity) costs, while considering the service quality requirements such as the delay probability. The objective function as well as the constraints in our formulation are random variables. The novelty of our approach is to introduce a solution method for the staffing of an operation where all three system rates (arrival, service, and abandonment) are random variables. We illustrate the use of the proposed model using both real and simulated call center data. In addition, we provide solution comparisons across different formulations, consider a dynamic extension, and discuss sensitivity implications of changing constraint upper bounds as well as prior hyper‐parameters. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 460–478, 2016     

The uncertainty sensitivity index method (USIM) and its extension

This article deals with optimization problems that have some uncertain parameters with unknown probabilities. The article proposes a strategy of transferring the system's uncertainty associated with these optimization problems into a norm or a set of norms that is added to the original objective function(s) within a multiobjective framework. The uncertainty sensitivity index method (USIM) proposed by Haimes and Hall [1977] is extended to several general cases. A robust algorithm is developed to guarantee an ideal solution for cases where the nominal value of the uncertain parameter is itself an uncertain variable. A design problem is also addressed to identify the best-compromise values of the system's parameters by integrating the USIM with the envelope approach.     

The quay crane scheduling problem with time windows

The quay crane scheduling problem consists of scheduling tasks for loading and unloading containers on cranes that are assigned to a vessel for its service. This article introduces a new approach for quay crane scheduling, where the availability of cranes at a vessel is restricted to certain time windows. The problem is of practical relevance, because container terminal operators frequently redeploy cranes among vessels to speed up the service of high‐priority vessels while serving low‐priority vessels casually. This article provides a mathematical formulation of the problem and a tree‐search‐based heuristic solution method. A computational investigation on a large set of test instances is used to evaluate the performance of the heuristic and to identify the impact of differently structured crane time windows on the achievable vessel handling time. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

Lanchester attrition of interpenetrating forces

To approximate the solutions of detailed simulations of interpenetrating forces (or possibly to assist in curtailing Monte Carlo calculations), this article provides solutions to a simple problem assuming that the speed of advance is constant; the only interactions are local; Lanchester's linear or square law applies; force distributions are continuous if not initially uniform in depth. The resultant partial differential equations are solvable (1) in closed form if attrition is minimal or (2) with pain when attrition is sufficient to annihilate the leading edge of a force. This is exemplified only for the square law, where one must solve an integrodifferential equation for an ancillary function. A general solution is given for either law, and for the latter case a more complete one, assuming that initial force distributions are uniform. Useful properties of an unusual class of Bessel functions needed for this analysis are given in an appendix. Copies of computer programs are available.     

One-facility location with rectilinear tour distances

This article concerns the location of a facility among n points where the points are serviced by “tours” taken from the facility. Tours include m points at a time and each group of m points may become active (may need a tour) with some known probability. Distances are assumed to be rectilinear. For m ≤ 3, it is proved that the objective function is separable in each dimension and an exact solution method is given that involves finding the median of numbers appropriately generated from the problem data. It is shown that the objective function becomes multimodal when some tours pass through four or more points. A bounded heuristic procedure is suggested for this latter case. This heuristic involves solving an auxiliary three-point tour location problem.     

Benders decomposition with alternative multiple cuts for a multi‐product closed‐loop supply chain network design model

In this article, we consider a multi‐product closed‐loop supply chain network design problem where we locate collection centers and remanufacturing facilities while coordinating the forward and reverse flows in the network so as to minimize the processing, transportation, and fixed location costs. The problem of interest is motivated by the practice of an original equipment manufacturer in the automotive industry that provides service parts for vehicle maintenance and repair. We provide an effective problem formulation that is amenable to efficient Benders reformulation and an exact solution approach. More specifically, we develop an efficient dual solution approach to generate strong Benders cuts, and, in addition to the classical single Benders cut approach, we propose three different approaches for adding multiple Benders cuts. These cuts are obtained via dual problem disaggregation based either on the forward and reverse flows, or the products, or both. We present computational results which illustrate the superior performance of the proposed solution methodology with multiple Benders cuts in comparison to the branch‐and‐cut approach as well as the traditional Benders decomposition approach with a single cut. In particular, we observe that the use of multiple Benders cuts generates stronger lower bounds and promotes faster convergence to optimality. We also observe that if the model parameters are such that the different costs are not balanced, but, rather, are biased towards one of the major cost categories (processing, transportation or fixed location costs), the time required to obtain the optimal solution decreases considerably when using the proposed solution methodology as well as the branch‐and‐cut approach. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Formulations for dynamic lot sizing with service levels

In this article, we study deterministic dynamic lot‐sizing problems with a service‐level constraint on the total number of periods in which backlogs can occur over a finite planning horizon. We give a natural mixed integer programming formulation for the single item problem (LS‐SL‐I) and study the structure of its solution. We show that an optimal solution to this problem can be found in \begin{align*}\mathcal O(n^2\kappa)\end{align*} time, where n is the planning horizon and \begin{align*}\kappa=\mathcal O(n)\end{align*} is the maximum number of periods in which demand can be backlogged. Using the proposed shortest path algorithms, we develop alternative tight extended formulations for LS‐SL‐I and one of its relaxations, which we refer to as uncapacitated lot sizing with setups for stocks and backlogs. {We show that this relaxation also appears as a substructure in a lot‐sizing problem which limits the total amount of a period's demand met from a later period, across all periods.} We report computational results that compare the natural and extended formulations on multi‐item service‐level constrained instances. © 2013 Wiley Periodicals, Inc. Naval Research Logistics, 2013