Discrete compound poisson processes and tables of the geometric poisson distribution

This paper discusses the properties of positive, integer valued compound Poisson processes and compares two members of the family: the geometric Poisson (stuttering Poisson) and the logarithmic Poisson. It is shown that the geometric Poisson process is particularly convenient when the analyst is interested in a simple model for the time between events, as in simulation. On the other hand, the logarithmic Poisson process is more convenient in analytic models in which the state probabilities (probabilities for the number of events in a specified time period) are required. These state probabilities have a negative binomial distribution. The state probabilities of the geometric Poisson process, known as the geometric Poisson distribution, are tabled for 160 sets of parameter values. The values of mean demand range from 0.10 to 10; those for variance to mean ratio from 1.5 to 7. It is observed that the geometric Poisson density is bimodal.     

Estimating the lead-time demand distribution for an autocorrelated demand by the pearson system and a normal approximation

The exact first four moments of lead-time demand L are derived for an AR(1) and a MA(1) demand structures where the arbitrary lead-time distribution is assumed to be independent of the demand structure. These moments then form a basis for the Pearson curve-fitting procedure for estimating the distribution of L. A normal approximation to L, a version of the central limit theorem, is obtained under some general conditions. Reorder points (ROPs) of an inventory system are then estimated based on the Pearson system and a normal approximation. Their performances are evaluated. Numerical investigation shows that the Pearson system performs extremely well. The normal approximation, however, is good only for some limited cases, and is sensitive to the choice of the lead-time distribution. A possible improvement is noted.     

Note: Dual sourcing with nonidentical suppliers

We analyze a dual-sourcing inventory model with exponential lead times and constant unit demand in which the order quantity is split in some proportion between two sources of supply. Unlike earlier studies, we do not require that the two sources be identical in terms of the lead-time parameters or the supply prices. We compare the expected total annual costs for the two-source and the traditional single-source models over a wide range of parameter values. We confirm the findings of earlier studies that, under stochastic lead times, dual sourcing yields savings in holding and shortage costs that could outweigh the incremental ordering costs. With this more general model, we demonstrate that savings from dual sourcing are possible even where the mean or the variability of the second source is higher. © 1993 John Wiley & Sons, Inc.     

Capacity expansion under a service‐level constraint for uncertain demand with lead times

For a service provider facing stochastic demand growth, expansion lead times and economies of scale complicate the expansion timing and sizing decisions. We formulate a model to minimize the infinite horizon expected discounted expansion cost under a service‐level constraint. The service level is defined as the proportion of demand over an expansion cycle that is satisfied by available capacity. For demand that follows a geometric Brownian motion process, we impose a stationary policy under which expansions are triggered by a fixed ratio of demand to the capacity position, i.e., the capacity that will be available when any current expansion project is completed, and each expansion increases capacity by the same proportion. The risk of capacity shortage during a cycle is estimated analytically using the value of an up‐and‐out partial barrier call option. A cutting plane procedure identifies the optimal values of the two expansion policy parameters simultaneously. Numerical instances illustrate that if demand grows slowly with low volatility and the expansion lead times are short, then it is optimal to delay the start of expansion beyond when demand exceeds the capacity position. Delays in initiating expansions are coupled with larger expansion sizes. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

Compound distributions with efficient computation in inventory model applications

In an inventory model, the distribution of total units demanded can be considered as a compound distribution arising from the distributions of demand occurrence and individual demand size. Three such compound distributions are considered, where the number of demands is Poisson distributed. The demand size distribution will depend on the observed or desired variance-to-mean ratio. An approximation using the gamma distribution is given in terms of the cumulants of the compound distribution for both fixed and stochastic lead times.     

A time dependent continuous review inventory model with compound poisson demand

We discuss a time dependent optimal ordering policy for a finite horizon inventory system for which the provision of service is essential and thus no stockout is allowed. It is assumed that the system can place an order at any point in time during the horizon when it cannot meet the customer's demand and that lead time is negligible. The demand is considered to be distributed as a compound Poisson process with known parameters and the functional equation approach of dynamic programming is used to formulate the objective function. An algorithm has been developed to obtain the solution for all the cases. In addition, analytical solutions of the basic equation under two limiting conditions are presented.     

(R.Q) inventory problem with unknown mean demand and learning

We address a single product, continuous review model with stationary Poisson demand. Such a model has been effectively studied when mean demand is known. However, we are concerned with managing new items for which only a Bayesian prior distribution on the mean is available. As demand occurs, the prior is updated and our control parameters are revised. These include the reorder point (R) and reorder quantity (Q). Deemer, taking a clue from some earlier RAND work, suggested using a model appropriate for known mean, but using a Compound Poisson distribution for demand rather than Poisson to reflect uncertainty about the mean. Brown and Rogers also used this approach but within a periodic review context. In this paper we show how to compute optimum reorder points for a special problem closely related to the problem of real interest. In terms of the real problem, subject to a qualification to be discussed, the reorder points found are upper bounds for the optimum. At the same time, the reorder points found can never exceed those found by the Compound Poisson (Deemer) approach. And they can be smaller than those found when there is no uncertainty about the mean. As a check, the Compound Poisson and proposed approach are compared by simulation.     

Estimating negative binomial demand for retail inventory management with unobservable lost sales

The importance of effective inventory management has greatly increased for many major retailers because of more intense competition. Retail inventory management methods often use assumptions and demand distributions that were developed for application areas other than retailing. For example, it is often assumed that unmet demand is backordered and that demand is Poisson or normally distributed. In retailing, unmet demand is often lost and unobserved. Using sales data from a major retailing chain, our analysis found that the negative binomial fit significantly better than the Poisson or the normal distribution. A parameter estimation methodology that compensates for unobserved lost sales is developed for the negative binomial distribution. The method's effectiveness is demonstrated by comparing parameter estimates from the complete data set to estimates obtained by artificially truncating the data to simulate lost sales. © 1996 John Wiley & Sons, Inc.     

Sole sourcing versus dual sourcing under stochastic demands and lead times

The use of a single vendor for each inventoried item is usually assumed in most of the inventory models. However, there are situations where the use of more than one vendor should be considered, especially when lead times are stochastic. This research presents a theoretical investigation of the effect of cost structures on the relative performance of sole-sourcing versus dual-sourcing inventory control policies. We show that except for cases where the ordering cost is high, the lead-time variability is low, or the customer service level is low, dual sourcing performs better than sole sourcing under the normally distributed demand and shifted-exponential lead times. Moreover, the computational results indicate the dual sourcing provides a better service level than sole sourcing at the optimal solutions, and that dual sourcing results in larger order quantities than sole sourcing, which suggests that attractive quantity discounts may not be in jeopardy when dual sourcing is employed. Finally, because it is generally known that multiple sourcing can enhance the competition among suppliers, material managers should consider splitting purchase orders when two equally qualified suppliers are available. © 1994 John Wiley & Sons, Inc.     

The logarithmic poisson gamma distribution: A model for leadtime demand

This paper considers an inventory system in which demand occurrences arise according to a stationary Poisson process, demand sizes at each occurrence follow a logarithmic distribution, and leadtimes are random variables with the gamma distribution. Both the exact and approximate distribution for leadtime demand are derived and computations are performed which compare the approximation to the exact distribution. The results have application to both repairable and consumable item inventory systems.     

Exact analysis of a two-echelon inventory system for recoverable items under batch inspection policy

We investigate a two-echelon (base-depot) inventory system of recoverable (repairable) items. The arrivals of demand at the bases are in a Poisson manner and the order sizes are random. The failed units can be repaired either at the base or at the depot, and the units beyond economic repair are condemned. Inspection of the failed units is carried out in the batches they arrive, that is, arrival batches are not broken up. The exact expressions for stationary distribution of depot inventory position, and of the number of backorders, onhand inventory, in-repair inventory at all locations are derived under the assumptions of constant repair and lead times. Special cases of complete recoverability, nonrecoverability, and of the unit order size are also discussed.     

Recursive evaluation of order-up-to-S policies for two-echelon inventory systems with compound Poisson demand

We consider an inventory system with one warehouse and N retailers. All installations apply different order-up-to-S policies. Transportation times are constant and the retailers face compound Poisson demand. We provide a simple recursive procedure for the evaluation of holding and shortage costs for different control policies. © 1996 John Wiley & Sons, Inc.     

On the (S − 1, S) lost sales inventory model with priority demand classes

In this paper an inventory model with several demand classes, prioritised according to importance, is analysed. We consider a lot‐for‐lot or (S ? 1, S) inventory model with lost sales. For each demand class there is a critical stock level at and below which demand from that class is not satisfied from stock on hand. In this way stock is retained to meet demand from higher priority demand classes. A set of such critical levels determines the stocking policy. For Poisson demand and a generally distributed lead time, we derive expressions for the service levels for each demand class and the average total cost per unit time. Efficient solution methods for obtaining optimal policies, with and without service level constraints, are presented. Numerical experiments in which the solution methods are tested demonstrate that significant cost reductions can be achieved by distinguishing between demand classes. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 593–610, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10032     

Optimal disposal policies for a single-item inventory system with returns

We consider a single-item inventory system in which the stock level can increase due to items being returned as well as decrease when demands occur. Returned items can be repaired and then used to satisfy future demand, or they can be disposed of. We identify those inventory levels where disposal is the best policy. It is shown that this problem is equivalent to a problem of controlling a single-server queue. When the return and demand processes are both Poisson, we find the optimal policy exactly. When the demand and return processes are more general, we use diffusion approximations to obtain an approximate model, which is then solved. The approximate model requires only mean and variance data. Besides the optimal policy, the output of the models includes such characteristics as the operating costs, the purchase rate for new items, the disposal rate for returned items and the average inventory level. Several numerical examples are given. An interesting by-product of our investigation is an approximation for the steady-state behavior of the bulk GI/G/1 queue with a queue limit.     

Single-lane bridge serving two-lane traffic

This paper presents a mathematical model of a single-lane bridge serving two-way traffic in alternating directions (with an FIFO rule observed within each directional queue). While the bridge serves cars moving in one direction, cars approaching from the opposite direction wait in a queue at its foot. When cars in the current direction finish crossing the bridge, it begins serving cars from the other direction, if any are present. A newly-arrived car finding an empty bridge mounts it immediately. Several cars moving in the same direction may occupy the bridge simultaneously. The crossing speed is assumed to be constant, and the arrival processes in both directions are assumed to be independent, homogeneous Poisson processes. A generalization of the alternating-priority models [1, 2] is developed to arrive at the Laplace-Stieltjes transform and the expected value of the flow time (the time interval between the moments of arrival at the bridge and departure from it) for steady state conditions. The results are discussed and some examples are presented graphically.     

Multi-class inventory models with demand a function of inventory level

This paper considers the problem of maintaining an inventory of an item which can deteriorate and become useless. A periodic review procedure is used and new items ordered may experience a time lag in delivery. Items are considered to deteriorate through one or two states before becoming useless. Thus the deterioration process in each period plays the role of the usual demand process and is a function of the inventory level at the beginning of each period. For the case of no time lag in delivery, one stage deterioration, and either binomial or uniform deterioration, optimal ordering policies are obtained for the n-period dynamic model with the standard cost structure. (For the shortage probability criterion see the other paper by Iglehart and Jaquette, in this issue.) These policies are of the single critical number type. For more complicated models suboptimal policies of this same type are found.     

Service levels in distribution systems with random customer order size

An approximate method for measuring the service levels of the warehouse-retailer system operating under (s, S) policy is presented. All the retailers are identical and the demand process at each retailer follows a stationary stuttering Poisson process. This type of demand process allows customer orders to be for a random number of units, which gives rise to the undershoot quantity at both the warehouse and retailer levels. Exact analyses of the distribution of the undershoot quantity and the number of orders place by a retailer during the warehouse reordering lead time are derived. By using this distribution together with probability approximation and other heuristic approaches, we model the behavior of the warehouse level. Based on the results of the warehouse level and on an existing framework from previous work, the service level at the retailer level is estimated. Results of the approximate method are then compared with those of simulation. © 1995 John Wiley & Sons, Inc.     

Evaluation of base-stock policies in multiechelon inventory systems with state-dependent demands part I: State-independent policies

This article analyzes a model of a multiechelon inventory system. The exogenous demands form Markov-modulated Poisson processes. That is, the demand rates are functions of an underlying Markov chain. Each location follows a base-stock policy which is independent of the state of the underlying Markov chain. We employ the exogenous transit mechanism introduced by Zipkin [7] and Svoronos and Zipkin [6]. The transit times between locations have phase-type distributions. An exact procedure to compute steady-state performance measures is presented. © 1992 John Wiley & Sons, Inc.     

Performance evaluation of a production/inventory system with periodic review and endogenous lead times

This paper considers a discrete time, single item production/inventory system with random period demands. Inventory levels are reviewed periodically and managed using a base‐stock policy. Replenishment orders are placed with the production system which is capacitated in the sense that there is a single server that sequentially processes the items one at a time with stochastic unit processing times. In this setting the variability in demand determines the arrival pattern of production orders at the queue, influencing supply lead times. In addition, the inventory behavior is impacted by the correlation between demand and lead times: a large demand size corresponds to a long lead time, depleting the inventory longer. The contribution of this paper is threefold. First, we present an exact procedure based on matrix‐analytic techniques for computing the replenishment lead time distribution given an arbitrary discrete demand distribution. Second, we numerically characterize the distribution of inventory levels, and various other performance measures such as fill rate, base‐stock levels and optimal safety stocks, taking the correlation between demand and lead times into account. Third, we develop an algorithm to fit the first two moments of the demand and service time distribution to a discrete phase‐type distribution with a minimal number of phases. This provides a practical tool to analyze the effect of demand variability, as measured by its coefficient of variation, on system performance. We also show that our model is more appropriate than some existing models of capacitated systems in discrete time. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007