Approximate semieconomic design of control charts with multiple control limtis

Statistical quality control of complicated production processes subject to a multiplicity of assignable causes may require the utilization of control charts with multiple control limits. This article presents an approximate semieconomic design of such charts, which is easily implementable in practical situations. Evaluations of the semieconomic control chart design show that the proposed approximate method results in solutions that are very close to the true optima and can be obtained with minimal computational effort.     

多输入离散变结构控制

对多输入离散变结构控制进行了研究 ,提出了等式到达条件下的多输入组合控制策略 ,这种控制策略的数学形式简单 ,易于实现 .仿真结果显示 ,该控制策略使系统具有较好的动态性能 ,优越于不等式到达条件下的控制律     

Inventory control of by-products

The system to be controlled produces n products simultaneously in fixed proportions every time it is activated. Demands for the products in any period are components of an n dimensional vector random variable with known distribution function. Cases of excess demands backlogged and excess demands lost are considered. In the former the notion of k convexity can be generalized to guarantee relatively simple form for the optimal policy in an n decision problem. In the latter, this generalization was not successful although when there is no setup cost, a convexity argument can be used to show that the optimal policy has a simple form.     

From control to parasitism

This article sets out to investigate the current paradoxical roles of border control agencies in order to contribute to the theoretical debate on border porosity and related security issues in West Africa. The colonial demarcation of African borders accounts for their porous nature initially, as borderland populations challenged the unjust scission of their cultural, economic, geographical and geopolitical spaces. However, new forms of porosity also evolved over time, masterminded by new actors. Drawing on the Ghana–Togo border case, and through interviews, observation and documentary analysis, this article argues that border control agencies are partly responsible for the current border porosity and attendant security problems as their jurisdiction has shifted to a multi-layered border parasitism. The article is not, however, an attack on border law enforcement agencies; rather it attempts to explore their roles in shielding the region, already exposed to terrorism and piracy, from further security threats.     

拦截器姿控系统的模糊滑模控制方法研究

对拦截器姿态控制系统进行研究,用模糊控制方法对准滑模控制方法加以改进,形成了一种模糊滑模变结构控制方法。仿真研究表明,该模糊滑模控制方法能够较好地实现拦截器的姿态控制,具有较好的快速性和稳定性。     

模糊控制在蒸汽发生器水位控制系统中的应用研究

针对蒸汽发生器水位控制系统的特殊性,分析其影响因素,建立相应的模糊控制规则,应用Simulink3.0对水位调节进行仿真,与PID控制比较,验证模糊控制的性能和可行性.     

大气层内燃气动力与气动力复合控制方法探讨

对采用燃气动力(直接力)与气动力复合控制技术的控制方式、姿控发动机控制周期、点火逻辑及姿控发动机启控策略等进行了初步探讨。重点对采用燃气动力/气动力复合控制方式中舵系统的工作模式进行了探讨及仿真研究,对姿控发动机控制周期及控制回路工作周期对制导精度的影响进行了初步仿真研究。通过仿真研究表明:在末制导阶段,采用燃气动力/气动力复合控制方式可提高导弹的快速性,进而提高导弹的制导控制精度。     

非奇异快速终端滑模及动态面控制的轨迹跟踪制导律

针对飞行器跟踪预设轨迹的问题,提出非奇异快速终端滑模和角度约束的轨迹跟踪制导律。通过引入虚拟目标点,提出参考轨迹曲率半径的期望视线角约束条件,建立带有视线角约束并考虑自动驾驶仪动态特性的轨迹跟踪数学模型。为了保证在有限时间内跟踪预设轨迹并避免出现奇异问题,采用快速非奇异终端滑模和动态面控制方法进行制导律设计。推导出视线角误差和轨迹跟踪误差之间的数学关系,并利用Lyapunov稳定性准则证明轨迹跟踪误差最终有界任意小。与弹道成型轨迹跟踪制导律进行仿真对比,仿真结果表明所提出的制导律具有良好的跟踪性能及鲁棒性。     

自适应逆控制FXLMS算法有源噪声控制仿真研究

前馈有源噪声控制方法可在较宽的频带有效,使之获得了广泛的应用.在前馈有源噪声控制中,直接使用传统的FXLMS算法时,由于次级通道传递函数往往是非最小相位系统,导致系统的性能下降.文中提出一种基于非最小相位系统逆控制的自适应前馈有源噪声控制FXLMS算法,用带宽随机噪声信号和实测风机通风管道噪声信号进行仿真实验研究,结果表明,较传统的FXLMS算法有明显的改进.     

柴油机PID、F并联调速控制研究

为了提高柴油机动态和稳态控制性能,提出了PID、F并联调速控制的方法,并利用Matlab/Simulink工具箱对PID、F交替调速控制和并联调速控制进行了仿真研究,表明Fuzzy-PID并联控制的性能优于常规PID控制和单纯的模糊调速控制以及PID、F交替调速控制的调速性能.     

Stochastic control of queueing systems

Suppose that the state of a queueing system is described by a Markov process { Y_t, t ≥ 0}, and the profit from operating it up to a time t is given by the function f(Y_t). We operate the system up to a time T, where the random variable T is a stopping time for the process Yt. Optimal stochastic control is achieved by choosing the stopping time T that maximizes Ef(Y_T) over a given class of stopping times. In this paper a theory of stochastic control is developed for a single server queue with Poisson arrivals and general service times.     

Statistical quality control of information

This paper was written to promote interest by management and statistical quality control personnel in the current need for statistical quality control of information of all types. By way of illustration, a step by step procedure for implementing such control on computer files is presented. Emphasis has been placed on the sequencing of the system rather than the underlying techniques.