Exact bayesian estimation of system reliability from component test data

System reliability is often estimated by the use of components' reliability test results when system test data are not available, or are very scarce. A method is proposed for computing the exact posterior probability density function, cumulative distribution function, and credible intervals for system reliability in a Bayesian setting, with the use of components' prior probability distributions and current test results. The method can be applied to series, parallel, and many mixed systems. Although in theory the method involves evaluating infinite series, numerical results show that a small number of terms from the infinite series are sufficient in practice to provide accurate estimates of system reliability. Furthermore, because the coefficients in the series follow some recurrence relations, our results allow us to calculate the reliability distribution of a large system from that of its subsystems. Error bounds associated with the proposed method are also given. Numerical comparisons with other existing approaches show that the proposed method is efficient and accurate. © 1997 John Wiley & Sons, Inc.     

基于Bayes理论的固有可用度定时截尾试验方案

为解决小子样条件下进行产品固有可用度试验验证的问题,基于Bayes理论,提出了一种固有可用度定时截尾试验方案．该试验方案在假设故障间隔时间和修复时间均服从指数分布的前提下,将现场试验分为同时进行的可靠性和维修性定时截尾试验2个部分,要求在利用验前试验信息的基础上,使本次试验获得的验后分布还可以作为下一次现场试验的验前分布,提高了试验数据的利用率,具有较好的经济效益．     

Approximate Bayesian intervals for the reliability of series systems from mixed subsystem test data

The determination of exact Bayesian intervals for the reliability of a series system from subsystem test data gives rise to computational difficulties involving severe loss of computing precision as the number of subsystems in the system increases. The end points of Bayesian intervals are percentage points of the posterior distribution and these are shown to be well approximated by Cornish and Fisher expansions when the number of subsystems is small. As the number of subsystems in the system increases even greater accuracy is guaranteed by the asymptotic nature of the expansions. The system posterior distribution function is also shown to be well approximated by an Edgeworth expansion.     

屏蔽数据在新型截尾样本下系统的可靠性分析

当系统含有屏蔽数据时,在具有随机移走逐步增加型截尾模型下,讨论了部件寿命服从双参数指数分布的串联系统可靠性估计问题。设随机移走系统数服从二项分布,利用极大似然方法,Bayes理论及方法,推导出双参数指数部件参数、系统可靠性函数、失效率函数及移走概率的极大似然估计和Bayes估计。并利用Monte Carlo方法对两种估计结果进行了比较,表明Bayes估计较极大似然估计效果更优。     

基于Bayes理论的测试性数据融合评估技术

针对目前高可靠性产品测试性评估验证面临的样本量不足的问题,提出一种基于Bayes理论的内外场数据融合评估技术,并给出详细的内外场测试性数据收集方法及原则,利用某产品的试验数据对该方法进行了验证。该方法工程应用性强,可作为高可靠性产品测试性评估的依据。     

A heuristic procedure for allocating tasks in fault-tolerant distributed computer systems

One way of achieving the increased levels of system reliability and availability demanded by critical computer-based control systems is through the use of fault-tolerant distributed computer systems. This article addresses the problem of allocating a set of m tasks among a set of n processors in a manner that will satisfy various task assignment, system capacity, and task scheduling constraints while balancing the workload across processors. We discuss problem background, problem formulation, and a known heuristic procedure for the problem. A new solution-improving heuristic procedure is introduced, and computational experience with the heuristics is presented. With only a modest increase in the amount of computational effort, the new procedure is demonstrated to improve dramatically solution quality as well as obtain near-optimal solutions to the test problems.     

Evaluating methods for the reliability of a large 2‐dimensional rectangular k‐within‐consecutive‐(r,s)‐out‐of‐(m,n):F system

A 2‐dimensional rectangular k‐within‐consecutive‐(r, s)‐out‐of‐(m, n):F system consists of m × n components, and fails if and only if k or more components fail in an r × s submatrix. This system can be treated as a reliability model for TFT liquid crystal displays, wireless communication networks, etc. Although an effective method has been developed for evaluating the exact system reliability of small or medium‐sized systems, that method needs extremely high computing time and memory capacity when applied to larger systems. Therefore, developing upper and lower bounds and accurate approximations for system reliability is useful for large systems. In this paper, first, we propose new upper and lower bounds for the reliability of a 2‐dimensional rectangular k‐within‐consecutive‐(r, s)‐out‐of‐(m, n):F system. Secondly, we propose two limit theorems for that system. With these theorems we can obtain accurate approximations for system reliabilities when the system is large and component reliabilities are close to one. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

基于Bayes理论的航空电子设备可靠性评估

针对航空电子设备无失效数据可靠性分析问题,提出了weibull分布下基于Bayes理论的无失效数据分析方法,基于分层Bayes思想建立了模型,推导出可靠性参数后验分布计算公式,结合实例,验证了方法的有效性,结果表明,此方法计算结果符合工程实际,在其他电子设备可靠性分析中,有一定的借鉴意义.     

混合指数分布模型的Bayes分析

针对截尾试验数据的情况,给出了二元混合指数分布模型的平均寿命和可靠性函数的严格的Ｂａｙｅｓ点估计,并运用最大熵准则给出了可靠性函数的近似的Ｂａｙｅｓ置信下限估计。     

Progressive Type‐II censoring and coherent systems

A new connection between the distribution of component failure times of a coherent system and (adaptive) progressively Type‐II censored order statistics is established. Utilizing this property, we develop inferential procedures when the data is given by all component failures until system failure in two scenarios: In the case of complete information, we assume that the failed component is also observed whereas in the case of incomplete information, we have only information about the failure times but not about the components which have failed. In the first setting, we show that inferential methods for adaptive progressively Type‐II censored data can directly be applied to the problem. For incomplete information, we face the problem that the corresponding censoring plan is not observed and that the available inferential procedures depend on the knowledge of the used censoring plan. To get estimates for distributional parameters, we propose maximum likelihood estimators which can be obtained by solving the likelihood equations directly or via an Expectation‐Maximization‐algorithm type procedure. For an exponential distribution, we discuss also a linear estimator to estimate the mean. Moreover, we establish exact distributions for some estimators in the exponential case which can be used, for example, to construct exact confidence intervals. The results are illustrated by a five component bridge system. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 512–530, 2015     

支持向量机规则提取

支持向量机是一种黑箱模型,其学习到的知识蕴含在决策函数中,不仅影响了用户对利用支持向量机技术构建智能系统的信心,还阻碍了支持向量机技术在数据挖掘领域的应用。由于对支持向量机规则提取进行研究有助于解决上述问题,因此该领域正成为机器学习和智能计算界的研究热点。分析了具有代表性的支持向量机规则提取算法,并提出该领域未来的研究重点。     

指数分布下可靠性参数的样条经验 Bayes 估计

基于可靠性参数的验前密度函数的样条密度估计，本文推导出指数分布失效率和可靠性函数的经验Ｂａｙｅｓ估计，并采用数学仿真将其与传统的Ｂａｙｅｓ方法，如Ｇａｍ ｍ ａ 验前分布的情况，进行了比较。仿真结果表明，本文的方法是有效的     

基于事件的系统可靠性参数仿真算法

介绍了可以用扩展可靠性框图表示的系统的可靠性参数的仿真算法。首先,对扩展可靠性框图进行了介绍,提出了利用树状结构来描述扩展可靠性框图的结构。其次,对基于扩展可靠性框图的系统行为进行了分析。然后,依据离散事件系统仿真思想,分别给出了计算可修系统可靠性参数的仿真算法与不可修系统可靠性参数的仿真算法。最后,给出了计算实例。该仿真算法不仅可以对状态独立系统进行可靠性参数计算,而且可以对具有冷储备关系以及冷储备嵌套关系的状态相关系统进行可靠性参数计算,具有很强的通用性与实用性。     

适应低时延业务需求的分布式可穿戴单兵作战信息系统

针对云计算应用在单兵作战系统场景下业务处理时延高、服务质量无法保障的问题,提出一种基于可穿戴计算的分布式单兵作战信息系统。利用士兵身上的可穿戴智能设备构建本地计算层,在作战地点就近处理计算数据,提供给士兵本地的信息处理与融合能力,并采用广义扩散负载均衡算法平衡各设备负载,降低业务处理时延;同时利用分布式计算的容错能力增强系统的可靠性。仿真结果表明,基于可穿戴设备的分布式本地网络架构能有效地降低作战任务的处理时延,同时增强系统的可靠性。     

Linear programming and the reliability of multicomponent systems

Several problems in the assignment of parallel redundant components to systems composed of elements subject to failure are considered. In each case the problem is to make an assignment which maximizes the system reliability subject to system constraints. Three distinct problems; are treated. The first is the classical problem of maximizing system reliability under total cost or weight constraints when components are subject to a single type of failure. The second problem deals with components which are subject to two types of failure and minimizes the probability of one mode of system failure subject to a constraint on the probability of the other mode of system failure. The third problem deals with components which may either fail to operate or may operate prematurely. System reliability is maximized subject to a constraint ori system safety. In each case the problem is formulated as an integer linear program. This has an advantage over alternative dynamic programming formulations in that standard algorithms may be employed to obtain numerical results.     

使用检查维修工作模型的建立

RCMA是制订装备预防性维修大纲的系统方法,可用度是制订军械装备预防性维修周期的主要决策目标,对RCMA七种工作类型之一的使用检查工作建立了以可用度为决策目标的一般模型,举例给出了模型输出结果的特征和敏感性,对几种特殊情况进行了讨论,给出的模型可用于此类问题的维修决策。     

一种基于机载SAR原始回波的多普勒参数估计方法

多普勒参数的估计精度直接影响机载合成孔径雷达系统(SAR)成像质量。根据平均后的方位谱来估计多普勒中心频率,通过计算子图像之间的位移值来估计多普勒调频斜率。为了消除在实际应用中各种干扰的影响,采用了对原始回波数据加窗的方法来提高对估计的准确性。该算法的估计结果可以用于补偿载机运动误差引入的相位误差,从而实现高分辨率成像。通过使用实验数据进行分析,验证了该方法的有效性。     

Transient analysis of multiple-unit reliability systems

A general Markovian model representing several multiple-unit redundant repairable systems is proposed and its transient behavior is studied. Specifically, for multiple-unit reliability system the reliability and availability functions are derived in an explicit form for the transient case. The stationary availability and mean time to system failure are deduced from the main results as special cases.     

On a class of multiple failure mode systems

The primary objective of this work is to introduce and perform a detailed study of a class of multistate reliability structures in which no ordering in the levels of components' performances is necessary. In particular, the present paper develops the basic theory (exact reliability formulae, reliability bounds, asymptotic results) that will make it feasible to investigate systems whose components are allowed to experience m ≥ 2 kinds of failure (failure modes), and their breakdown is described by different families of cut sets in each mode. For illustration purposes, two classical (binary) systems are extended to analogous multiple failure mode structures, and their reliability performance (bounds and asymptotic behavior) is investigated by numerical experimentation. © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 167–185, 2002; DOI 10.1002/nav.10007