Economic lot scheduling of fully loaded processes with external setups

Without restricting the class of permissible schedules, we derive optimal schedules for economic lot scheduling problems that are fully loaded, have external setups, and have only two products. The fully loaded condition accurately represents certain types of bottlenecks. We show that the optimal schedule must have the Wagner-Whitin property. We also develop a measure of aggregate inventory, derive an optimal steady-state aggregate inventory policy, and provide conditions under which the aggregate inventory level of an optimal schedule must approach a steady state. By restricting the class of permissible schedules to rotation cycle schedules, we extend these results to more than two products.     

More ado about economic order quantities (EOQ)

This paper is concerned with the determination of explicit expressions for economic order quantities and reorder levels, such that the cost of ordering and holding inventory is minimized for specific backorder constraints. Holding costs are applied either to inventory position or on-hand inventory, and the backorder constraint is considered in terms of the total number of backorders per year or the average number of backorders at any point in time. Through the substitution of a new probability density function in place of the normal p.d.f., explicit expressions are determined for the economic order quantities and the reorder points. The resulting economic order quantities are independent of all backorder constraints. It is also concluded that under certain conditions, the minimization of ordering costs and inventory holding costs (applied to inventory position), subject to a backorder constraint, is equivalent in terms of reorder levels to minimization of the safety level dollar investment subject to the same backorder constraint.     

Optimal inventory policies for substitutable commodities with stochastic demand

In this article we consider a stochastic model for two products which have a single-period inventory structure and which can be used as substitutes for each other should the need arise. Substitution will occur with probability one, but at perhaps a different revenue level. We prove that the expected profit function is concave, allowing us to find optimal stocking levels for the two products. We compare optimum inventory levels for the case of single substitution with that where there is no substitution. It is demonstrated for the case of single substitution that total optimum order quantities can actually increase or decrease with the substitution revenue.     

A note on optimal inventory management under inflation

This paper develops a discounted-cost model that is similar to the classical economic order quantity model but includes inflation rates as parameters of the inventory system. A numerical problem is solved to illustrate the effects.     

Ordering policies for an inventory system with three supply modes

This article explores ordering policies for inventory systems with three supply modes. This model is particularly interesting because the optimal ordering decision needs to balance the inventory and purchase costs, as well as the costs for earlier and later periods. The latter cost trade-off is present only in inventory systems with three or more supply modes. Therefore, the result not only offers guidelines for the operation of the concerned inventory systems, but also provides valuable insight into the complex cost trade-offs when more supply modes are available. We assume that the difference between the lead times is one period, and the inventory holding and shortage costs are linear. We analyze two cases and obtain the structure of the optimal ordering policy. Moreover, in the first case, explicit formulas are derived to calculate the optimal order-up-to levels. In the second case, although the optimal order-up-to levels are functions of the initial inventory state and are not obtained in closed form, their properties are discussed. We also develop heuristic ordering policies based on the news-vendor model. Our numerical experiments suggest that the heuristic policies perform reasonably well. © 1996 John Wiley & Sons, Inc.     

Some approximations in multi-item,multi-echelon inventory systems for recoverable items

The optimization problem as formulated in the METRIC model takes the form of minimizing the expected number of total system backorders in a two-echelon inventory system subject to a budget constraint. The system contains recoverable items – items subject to repair when they fail. To solve this problem, one needs to find the optimal Lagrangian multiplier associated with the given budget constraint. For any large-scale inventory system, this task is computationally not trivial. Fox and Landi proposed one method that was a significant improvement over the original METRIC algorithm. In this report we first develop a method for estimating the value of the optimal Lagrangian multiplier used in the Fox-Landi algorithm, present alternative ways for determining stock levels, and compare these proposed approaches with the Fox-Landi algorithm, using two hypothetical inventory systems – one having 3 bases and 75 items, the other 5 bases and 125 items. The comparison shows that the computational time can be reduced by nearly 50 percent. Another factor that contributes to the higher requirement for computational time in obtaining the solution to two-echelon inventory systems is that it has to allocate stock optimally to the depot as well as to bases for a given total-system stock level. This essentially requires the evaluation of every possible combination of depot and base stock levels – a time-consuming process for many practical inventory problems with a sizable system stock level. This report also suggests a simple approximation method for estimating the optimal depot stock level. When this method was applied to the same two hypotetical inventory systems indicated above, it was found that the estimate of optimal depot stock is quite close to the optimal value in all cases. Furthermore, the increase in expected system backorders using the estimated depot stock levels rather than the optimal levels is generally small.     

An empirical evaluation of further approximations to an approximate continuous review inventory model

This paper describes an empirical evaluation of several approximations to Hadley and Whitin's approximate continuous review inventory model with backorders. It is assumed that lead time demand is normally distributed and various exponential functions are used to approximate the upper tail of this distribution. These approximations offer two important advantages in computing reorder points and reorder quantities. One advantage is that normal tables are no longer required to obtain solutions, and a second advantage is that solutions may be obtained directly rather than iteratively. These approximations are evaluated on two distinct inventory systems. It is shown that an increase in average annual cost of less that 1% is expected as a result of using these approximations. The only exception to this statement is with inventory systems in which a high shortage cost is specified and ordering costs are unusually low.     

A generalized recursive algorithm for a class of non-stationary regeneration (scheduling) problems

Recent efforts in the field of dynamic programming have explored the feasibility of solving certain classes of integer programming problems by recursive algorithms. Special recursive algorithms have been shown to be particularly effective for problems possessing a 0–1 attribute matrix displaying the “nesting property” studied by, Ignall and Veinott in inventory theory and by Glover in network flows. This paper extends the class of problem structures that has been shown amenable to recursive exploitation by providing an efficient dynamic programming approach for a general transportation scheduling problem. In particular, we provide alternative formulations lor the scheduling problem and show how the most general of these formulations can be readily solved vis a vis recursive techniques.     

Newsvendor problems with sequentially revealed demand information

This article analyzes a capacity/inventory planning problem with a one‐time uncertain demand. There is a long procurement leadtime, but as some partial demand information is revealed, the firm is allowed to cancel some of the original capacity reservation at a certain fee or sell off some inventory at a lower price. The problem can be viewed as a generalization of the classic newsvendor problem and can be found in many applications. One key observation of the analysis is that the dynamic programming formulation of the problem is closely related to a recursion that arises in the study of a far more complex system, a series inventory system with stochastic demand over an infinite horizon. Using this equivalence, we characterize the optimal policy and assess the value of the additional demand information. We also extend the analysis to a richer model of information. Here, demand is driven by an underlying Markov process, representing economic conditions, weather, market competition, and other environmental factors. Interestingly, under this more general model, the connection to the series inventory system is different. © 2012 Wiley Periodicals, Inc. Naval Research Logistics 2012     

MARKOVIAN DETERIORATION WITH UNCERTAIN INFORMATION — A MORE GENERAL MODEL

A model of a deteriorating system with imperfect information is considered. The structures appropriate for such a model include failing machinery and depleted inventory systems. In an effort to add a new dimension to such models, it is assumed that the operator must pay an inspection cost to determine the precise state of the system. At the start of every time period, the operator is faced with three choices: repair, no action, or inspection. Under fairly general assumptions, the optimal policy for repair is found to be straightforward and intuitive. This result has two important areas of application.     

On the value of information in dynamic production/inventory problems under forecast evolution

In this article we explore how total system costs and inventory positions are affected when forecasts are incorporated explicitly in production/inventory systems. We assume that forecasts for demand of a certain item are available in each period, and they evolve from one period to the next in accordance with an additive evolution model. In order to analyze the effects of the forecasts on the production/inventory system we compare the optimal ordering policy and the expected costs of the model that keeps forecasts with that of a comparable standard inventory model. We show that under mild assumptions the former yields lower expected costs and inventory levels than the latter. © 1996 John Wiley & Sons, Inc.     

A Bayesian approach to demand estimation and inventory provisioning

This article addresses the problem of explicitly taking into account uncertainty about the demand for spare parts in making inventory procurement and stockage decisions. The model described provides for a unified treatment of the closely related problems of statistical estimation of demand and resource allocation within the inventory system, and leads to an easily implemented, efficient method of determining requirements for spare parts both in the early provisioning phase and in later periods of operations when demand data have accumulated Analyses of the model's theoretical foundations and of sample outcomes of the model based upon data on parts intended for use in the F-14 lead to conclusions of great importance to both support planners and operations planners Finally, of particular significance is the ability afforded the planner by this model to quantify the impact on inventory system costs of varying levels of system reliability or management uncertainty as to projected system performance. This will provide an economic basis for analysis of such alternatives as early deployment, operational testing, and equipment redesign.     

Selling to strategic and loss‐averse consumers: Stocking,procurement, and product design policies

Motivated by the presence of loss‐averse decision making behavior in practice, this article considers a supply chain consisting of a firm and strategic consumers who possess an S‐shaped loss‐averse utility function. In the model, consumers decide the purchase timing and the firm chooses the inventory level. We find that the loss‐averse consumers' strategic purchasing behavior is determined by their perceived gain and loss from strategic purchase delay, and the given rationing risk. Thus, the firm that is cognizant of this property tailors its inventory stocking policy based on the consumers' loss‐averse behavior such as their perceived values of gain and loss, and their sensitivity to them. We also demonstrate that the firm's equilibrium inventory stocking policy reflects both the economic logic of the traditional newsvendor inventory model, and the loss‐averse behavior of consumers. The equilibrium order quantity is significantly different from those derived from models that assume that the consumers are risk neutral and homogeneous in their valuations. We show that the firm that ignores strategic consumer's loss‐aversion behavior tends to keep an unnecessarily high inventory level that leads to excessive leftovers. Our numerical experiments further reveal that in some extreme cases the firm that ignores strategic consumer's loss‐aversion behavior generates almost 92% more leftovers than the firm that possesses consumers’ loss‐aversion information and takes it into account when making managerial decisions. To mitigate the consumer's forward‐looking behavior, we propose the adoption of the practice of agile supply chain management, which possesses the following attributes: (i) procuring inventory after observing real‐time demand information, (ii) enhanced design (which maintains the current production mix but improves the product performance to a higher level), and (iii) customized design (which maintains the current performance level but increases the variety of the current production line to meet consumers’ specific demands). We show that such a practice can induce the consumer to make early purchases by increasing their rationing risk, increasing the product value, or diversifying the product line. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 435–453, 2015     

A deterministic inventory model for reparable items

A reparable inventory system has two distinct inventories within it—the inventory of items ready-for-issue and the inventory of carcasses available for repair. A reparable item is usually rebuilt upon failure, but the scrap rate in the repair process is generally positive. Consequently, new items must be procured from time to time to replace those item: which were scrapped. The ready-for-issue inventory has two input sources—procurement and repair, This paper develops a deterministic inbentory model for the reparable inventory system, and determines the optimal procurement and repair quantities.     

An optimal critical level policy for inventory systems with two demand classes

Traditional inventory systems treat all demands of a given item equally. This approach is optimal if the penalty costs of all customers are the same, but it is not optimal if the penalty costs are different for different customer classes. Then, demands of customers with high penalty costs must be filled before demands of customers with low penalty costs. A commonly used inventory policy for dealing with demands with different penalty costs is the critical level inventory policy. Under this policy demands with low penalty costs are filled as long as inventory is above a certain critical level. If the inventory reaches the critical level, only demands with high penalty costs are filled and demands with low penalty costs are backordered. In this article, we consider a critical level policy for a periodic review inventory system with two demand classes. Because traditional approaches cannot be used to find the optimal parameters of the policy, we use a multidimensional Markov chain to model the inventory system. We use a sample path approach to prove several properties of this inventory system. Although the cost function is not convex, we can build on these properties to develop an optimization approach that finds the optimal solution. We also present some numerical results. © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Optimal stocking policies for low usage items in multi-echelon inventory systems

Multi-echelon logistic systems are essential parts of the service support function of high technology firms. The combination of technological developments and competitive pressures has led to the development of services systems with a unique set of characteristics. These characteristics include (1) low demand probabilities: (2) high cost items; (3) complex echelon structures; (4) existence of pooling mechanisms among stocking locations at the same echelon level; (5) high priority for service, which is often expressed in terms of response time service levels for product groups of items: (6) scrapping of failed parts; and (7) recycling of issued stock due to diagnostic use. This article develops a comprehensive model of a stochastic, multi-echelon inventory system that takes account of the above characteristics. Solutions to the constrained optimization problem are found using a branch and bound procedure. The results of applying this procedure to a spare parts inventory system for a computer manufacturer have led to a number of important policy conclusions.     

Banyan网的一类非阻塞特性及其在ATM交换机设计中的应用

Ｂａｎｙａｎ网具有结构简单、自寻址、硬件复杂度低等优点，因而被许多交换系统和多机系统作为基本互连网络，但其内阻塞特性限制了它的性能。对某些特定输入模式，Ｂａｎｙａｎ网是非阻塞的。本文讨论Ｂａｎｙａｎ网的一类非阻塞特性，说明它们在ＡＴＭ交换机设计中的应用——通过数据分布提高ＡＴＭ交换机的负载均衡能力，用更小的硬件代价实现多目广播功能。     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

An economic lot‐sizing problem with perishable inventory and economies of scale costs: Approximation solutions and worst case analysis

The costs of many economic activities such as production, purchasing, distribution, and inventory exhibit economies of scale under which the average unit cost decreases as the total volume of the activity increases. In this paper, we consider an economic lot‐sizing problem with general economies of scale cost functions. Our model is applicable to both nonperishable and perishable products. For perishable products, the deterioration rate and inventory carrying cost in each period depend on the age of the inventory. Realizing that the problem is NP‐hard, we analyze the effectiveness of easily implementable policies. We show that the cost of the best Consecutive‐Cover‐Ordering (CCO) policy, which can be found in polynomial time, is guaranteed to be no more than (4 + 5)/7 ≈ 1.52 times the optimal cost. In addition, if the ordering cost function does not change from period to period, the cost of the best CCO policy is no more than 1.5 times the optimal cost. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

Coping with shortages caused by disruptive events in automobile supply chains

Unpredictable disruptive events significantly increase the difficulty of the management of automobile supply chains. In this paper, we propose an automobile production planning problem with component chips substitution in a finite planning horizon. The shortage of one chip can be compensated by another chip of the same type with a higher-end feature at an additional cost. Therefore, the automobile manufacturer can divert the on-hand inventory of chips to product lines that are more profitable in the event of shortages caused by supply chain disruptions. To cope with this, we propose a max-min robust optimization model that captures the uncertain supplies of chips. We show that the robust model has a mixed-integer programming equivalence that can be solved by a commercial IP solver directly. We compare the max-min robust model with the corresponding deterministic and two-stage stochastic models for the same problem through extensive numerical experiments. The computational results show that the max-min robust model outperforms the other two models in terms of the average and worst-case profits.