On the minimization of a certain convex function arising in applied decision theory

The author, in an expository paper [4], has presented an algorithm for choosing a non-negative vector

     

Confidence intervals for ranked means

Suppose that observations from populations π₁, …, π_k (k ≥ 1) are normally distributed with unknown means μ₁., μ_k, respectively, and a common known variance σ². Let μ_[1] μ … ≤ μ_[k] denote the ranked means. We take n independent observations from each population, denote the sample mean of the n observation from π₁ by X _i (i = 1, …, k), and define the ranked sample means X _[1] ≤ … ≤ X _[k]. The problem of confidence interval estimation of μ₍₁₎, …,μ_[k] is stated and related to previous work (Section 1). The following results are obtained (Section 2). For i = 1, …, k and any γ(0 < γ < 1) an upper confidence interval for μ_[i] with minimal probability of coverage γ is (? ∞, X _[i]+ h) with h = (σ/n^1/2) Φ^?1(γ^1/k-i+1), where Φ(·) is the standard normal cdf. A lower confidence interval for μ_[i] with minimal probability of coverage γ is (X _i[i] – g, + ∞) with g = (σ/n^1/2) Φ^?1(γ^1/i). For the upper confidence interval on μ_[i] the maximal probability of coverage is 1– [1 – γ^1/k-i+1]ⁱ, while for the lower confidence interval on μ_[i] the maximal probability of coverage is 1–[1– γ^1/i] ^k-i+¹. Thus the maximal overprotection can always be calculated. The overprotection is tabled for k = 2, 3. These results extend to certain translation parameter families. It is proven that, under a bounded completeness condition, a monotone upper confidence interval h(X ₁, …, X _k) for μ_[i] with probability of coverage γ(0 < γ < 1) for all μ = (μ_[1], …,μ_[k]), does not exist.     

The queueing system MX/G/1 and its ramifications

This paper deals with the bulk arrival queueing system M^X/G/1 and its ramifications. In the system M^X/G/1, customers arrive in groups of size X (a random variable) by a Poisson process, the service times distribution is general, and there is a single server. Although some results for this queueing system have appeared in various books, no unified account of these, as is being presented here, appears to have been reported so far. The chief objectives of the paper are (i) to unify by an elegant procedure the relationships between the p.g.f.'s

     

Bounds for circular error probabilities

Bounds for P(X + X ⩽ k²σ) are given where X₁ and X₂ are independent normal variables having zero means and variances σ, σ, respectively. This is generalized when X₁ and X₂ are dependent variables with known covariance matrix.     

An application of the MTP2 property on bounds on system reliability

This paper is concerned with the joint prior distribution of the dependent reliabilities of the components of a binary system. When this distribution is MTP₂ (Multivariate Totally Positive of Order 2), it is shown in general that this actually makes the machinery of Natvig and Eide [7] available to arrive at the posterior distribution of the system's reliability, based on data both at the component and system level. As an illustration in a common environmental stress case, the joint prior distribution of the reliabilities is shown to have the MTP₂ property. We also show, similarly to Gåsemyr and Natvig [3], for the case of independent components given component reliabilities how this joint prior distribution may be based on the combination of expert opinions. A specific system is finally treated numerically. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 741–755, 1997     

Inventory policies for a make‐to‐order system with a perishable component and fixed ordering cost

We consider a make‐to‐order production system where two major components, one nonperishable (referred to as part 1) and one perishable (part 2), are needed to fulfill a customer order. In each period, replenishment decisions for both parts need to be made jointly before demand is realized and a fixed ordering cost is incurred for the nonperishable part. We show that a simple (s_n,S,S) policy is optimal. Under this policy, S along with the number of backorders at the beginning of a period if any and the availability of the nonperishable part (part 1) determines the optimal order quantity of the perishable part (part 2), while (s_n,S) guide when and how much of part 1 to order at each state. Numerical study demonstrates that the benefits of using the joint replenishment policy can be substantial, especially when the unit costs are high and/or the profit margin is low. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

Stock control in a many depot system

The chief problems considered are: (1) In a parallel set of warehouses, how should stocks be allocated? (2) In a system consisting of a central warehouse and several subsidiary warehouses, how much stock should be carried in each? The demands may have known, or unknown, distribution functions. For problem (1), the i-th stock n_i should usually be allocated in proportion to the i-th demand m_i; in special cases, a significant improvement is embodied in the formula (N = total allocable stock)

     

A note on circular error probabilities

An approximation for P(X² + Y² ≤ K²σ²₁) based on an unpublished result of Kleinecke is derived, where X and Y are independent normal variables having zero means and variances σ²₁ and σ²₂ and σ₁ ≥ σ₂. Also, we provide asymptotic expressions for the probabilities for large values of β = K²(1 - c²)/4c² where c = σ₂/σ₁. These are illustrated by comparing with values tabulated by Harter [6]. Solution of K for specified P and c is also considered. The main point of this note is that simple and easily calculable approximations for P and K can be developed and there is no need for numerical evaluation of integrals.     

Stochastic comparisons for single-server queues

We consider single-server queueing systems with the queue discipline “first come, first served,” interarrival times {u_k, k ≥ l}, and service times {u_k, k ≥ l}, where the {u_k} and {u_k} are independent sequences of non-negative random variables that are independently but not necessarily identically distributed. Let X_k = u_k − u_k (k ≥ 1), S₀ 0, S_n = X₁ + X₂ … + X_n(n≥1). It is known that the (possibly nonhomogeneous) random walk {S_n} determines the behavior of the system. In this paper we make stochastic comparisons of two such systems σ₁,σ₂ whose basic random variables X and X are stochastically ordered. The corresponding random walks are also similarly ordered, and this leads to stochastic comparisons of idle times, duration of busy period and busy cycles, number of customers served during a busy period, and output from the system. In the classical case of identical distributions of {u_k} and {u_k} we obtain further comparisons. Our results are for the transient behavior of the systems, not merely for steady state.     

On a sequential rule for estimating the location parameter of an exponential distribution

Let us assume that observations are obtained at random and sequentially from a population with density function In this paper we consider a sequential rule for estimating μ when σ is unknown corresponding to the following class of cost functions In this paper we consider a sequential rule for estimating μ when σ is unknown corresponding to the following class of cost functions Where δ(X_I,…,X_N) is a suitable estimator of μ based on the random sample (X₁,…, X_N), N is a stopping variable, and A and p are given constants. To study the performance of the rule it is compared with corresponding “optimum fixed sample procedures” with known σ by comparing expected sample sizes and expected costs. It is shown that the rule is “asymptotically efficient” when absolute loss (p=-1) is used whereas the one based on squared error (p = 2) is not. A table is provided to show that in small samples similar conclusions are also true.     

Scheduling multiple products on parallel machines with setup costs

We consider a class of production scheduling models with m identical machines in parallel and k different product types. It takes a time p_i to produce one unit of product type i on any one of the machines. There is a demand stream for product type i consisting of n_i units with each unit having a given due date. Before a machine starts with the production of a batch of products of type i a setup cost c is incurred. We consider several different objective functions. Each one of the objective functions has three components, namely a total setup cost, a total earliness cost, and a total tardiness cost. In our class of problems we find a relatively large number of problems that can be solved either in polynomial time or in pseudo‐polynomial time. The polynomiality or pseudo‐polynomiality is achieved under certain special conditions that may be of practical interest; for example, a regularity pattern in the string of due dates combined with earliness and tardiness costs that are similar for different types of products. The class of models we consider includes as special cases discrete counterparts of a number of inventory models that have been considered in the literature before, e.g., Wagner and Whitin (Manage Sci 5 (1958), 89–96) and Zangwill (Oper Res 14 (1966), 486–507; Manage Sci 15 (1969), 506–527). © 2008 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

Estimating component characteristics from system failure‐time data

Suppose that failure times are available from a random sample of N systems of a given, fixed design with components which have i.i.d. lifetimes distributed according to a common distribution F. The inverse problem of estimating F from data on observed system lifetimes is considered. Using the known relationship between the system and component lifetime distributions via signature and domination theory, the nonparametric maximum likelihood estimator _N(t) of the component survival function (t) is identified and shown to be accessible numerically in any application of interest. The asymptotic distribution of _N(t) is also identified, facilitating the construction of approximate confidence intervals for (t) for N sufficiently large. Simulation results for samples of size N = 50 and N = 100 for a collection of five parametric lifetime models demonstrate the utility of the recommended estimator. Possible extensions beyond the i.i.d. framework are discussed in the concluding section. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Scheduling deteriorating jobs to minimize makespan

We consider a single-machine problem of scheduling n independent jobs to minimize makespan, in which the processing time of job J_j grows by w_j with each time unit its start is delayed beyond a given common critical date d. This processing time is p_j if J_j starts by d. We show that this problem is NP-hard, give a pseudopolynomial algorithm that runs in time and O(nd) space, and develop a branch-and-bound algorithm that solves instances with up to 100 jobs in a reasonable amount of time. We also introduce the case of bounded deterioration, where the processing time of a job grows no further if the job starts after a common maximum deterioration date D > d. For this case, we give two pseudopolynomial time algorithms: one runs in O(n²d(D − d) time and O(nd(D − d)) space, the other runs in p_j)²) time and p_j) space. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 511–523, 1998     

A stochastic assignment problem

There are n boxes with box i having a quota value Balls arrive sequentially, with each ball having a binary vector attached to it, with the interpretation being that if X_i = 1 then that ball is eligible to be put in box i. A ball's vector is revealed when it arrives and the ball can be put in any alive box for which it is eligible, where a box is said to be alive if it has not yet met its quota. Assuming that the components of a vector are independent, we are interested in the policy that minimizes, either stochastically or in expectation, the number of balls that need arrive until all boxes have met their quotas. © 2014 Wiley Periodicals, Inc. 62:23–31, 2015     

Readiness and the optimal redeployment of resources

This paper considers the problem of the optimal redeployment of a resource among different geographical locations. Initially, it is assumed that at each location i, i = 1,…, n, the level of availability of the resource is given by a₁ ≧ 0. At time t > 0, requirements R_f(t) ≧ 0 are imposed on each location which, in general, will differ from the a₁. The resource can be transported from any one location to any other in magnitudes which will depend on t and the distance between these locations. It is assumed that ΣR_j > Σa_t The objective function consideis, in addition to transportation costs incurred by reallocation, the degree to which the resource availabilities after redeployment differ from the requirements. We shall associate the unavailabilities at the locations with the unreadiness of the system and discuss the optimal redeployment in terms of the minimization of the following functional forms: \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\limits_{j = 1}^n {kj(Rj - yj) + } $\end{document} transportation costs, Max \documentclass{article}\pagestyle{empty}\begin{document}$ \mathop {Max}\limits_j \,[kj(Rj - yj)] + $\end{document} transportation costs, and \documentclass{article}\pagestyle{empty}\begin{document}$ \sum\limits_{j = 1}^n {kj(Rj - yj)^2 + } $\end{document} transportation costs. The variables y_j represent the final amount of the resource available at location j. No benefits are assumed to accrue at any location if y_j > R_j. A numerical three location example is given and solved for the linear objective.     

Technical note: Finite-time regret analysis of Kiefer-Wolfowitz stochastic approximation algorithm and nonparametric multi-product dynamic pricing with unknown demand

We consider the problem of nonparametric multi-product dynamic pricing with unknown demand and show that the problem may be formulated as an online model-free stochastic program, which can be solved by the classical Kiefer-Wolfowitz stochastic approximation (KWSA) algorithm. We prove that the expected cumulative regret of the KWSA algorithm is bounded above by where κ₁, κ₂ are positive constants and T is the number of periods for any T = 1, 2, … . Therefore, the regret of the KWSA algorithm grows in the order of , which achieves the lower bounds known for parametric dynamic pricing problems and shows that the nonparametric problems are not necessarily more difficult to solve than the parametric ones. Numerical experiments further demonstrate the effectiveness and efficiency of our proposed KW pricing policy by comparing with some pricing policies in the literature.     

A finiteness proof for modified dantzig cuts in integer programming

Let be a basic solution to the linear programming problem subject to: where R is the index set associated with the nonbasic variables. If all of the variables are constrained to be nonnegative integers and x_u is not an integer in the basic solution, the linear constraint is implied. We prove that including these “cuts” in a specified way yields a finite dual simplex algorithm for the pure integer programming problem. The relation of these modified Dantzig cuts to Gomory cuts is discussed.     

Optimizing the defensive characteristics of mild steel via the electrodeposition of ZnSi3N4 reinforcing particles

The effect of ZnSi₃N₄ deposition prepared via direct electrolytic co-deposition on mild steel was studied as a result its inherent vulnerability to corrosion in an aggressive environment and failure on the application of load. The experiment was conducted varying the mass concentration of silicon nitride (Si₃N₄) between 7 and 13 g at cell voltage of 0.3 and 0.5 V, at constant temperature of 45 °C. The morphologies of the coated surfaces were characterized using high resolution Nikon Optical Microscope and Scanning Electron Microscope (SEM) revealing that the particles of the ZnSi₃N₄ were homogeneously dispersed. The corrosion behaviour was studied using potentiodynamic polarization technique in 3.65% NaCl solution and the microhardness was examined using Brinell hardness testing technique. The result of the corrosion experiment confirmed an improved corrosion resistance with a reduction in corrosion rate from 9.7425 mm/year to 0.10847 mm/year, maximum coating efficiency of 98.9%, maximum polarization resistance of 1555.3 Ω and a very low current density of 9.33 × 10⁻⁶ A/cm². The negative shift in the E_corr revealed the cathodic protective nature of the coating. The microhardness was also found to have increased from 137.9 HBN for the unmodified steel to a maximum value of 263.3 HBN for the 0.5Zn13Si₃N₄ coated steel representing 90.9% increment in hardness as a result of the matrix grain refining and dispersion-strengthening ability of the incorporated Si₃N₄ particles.     

New results on a Ruckle problem in discrete games of ambush

This article deals with a two‐person zero‐sum game in which player I chooses in integer interval [1, N] two integer intervals consisting of p and q points where p + q < N, and player II chooses an integer point in [1, N]. The payoff to player I equals 1 if the point chosen by player II is at least in one of the intervals chosen by player II and 0 otherwise. This paper complements the results obtained by Ruckle, Baston and Bostock, Lee, Garnaev, and Zoroa, Zoroa and Fernández‐Sáez. © 2001 John Wiley & Sons, Inc. Naval Research Logistics 48: 98–106, 2001     

Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015