A squared-euclidean distance location-allocation problem

This article is concerned with the analysis of a squared-Euclidean distance location-allocation problem with balanced transportation constraints, where the costs are directly proportional to distances and the amount shipped. The problem is shown to be equivalent to maximizing a convex quadratic function subject to transportation constraints. A branch-and-bound algorithm is developed that utilizes a specialized, tight, linear programming representation to compute strong upper bounds via a Lagrangian relaxation scheme. These bounds are shown to substantially dominate several other upper bounds that are derived using standard techniques as problem size increases. The special structure of the transportation constraints is used to derive a partitioning scheme, and this structure is further exploited to devise suitable logical tests that tighten the bounds implied by the branching restrictions on the transportation flows. The transportation structure is also used to generate additional cut-set inequalities based on a cycle prevention method which preserves a forest graph for any partial solution. Results of the computational experiments, and a discussion on possible extensions, are also presented.     

A note on duality in homogeneous fractional programming

For a linear fractional programming problem, Sharma and Swarup have constructed a dual problem, also a linear fractional program, in which the objective functions of both primal and dual problems are the same. Craven and Mond have extended this result to a nonlinear fractional programming problem with linear constraints, and a dual problem for which the objective function is the same as that of the primal. This theorem is now further extended from linear to differentiable convex constraints.     

Interactive multicriteria linear programming: An extension of the method of Zionts and Wallenius

This article presents an extension of the interactive multicriteria linear-programming method of Zionts and Wallenius [see Management Science, 29 (5) (1983)]. The decision maker's underlying utility function is assumed to be pseudoconcave, and his preference structure is assessed through pairwise comparison questions. In the method of Zionts and Wallenius, the decision maker's preference structure is represented as constraints on the weights on the objectives derived from his responses. This representation is only a linear approximation to the underlying nonlinear utility function. Accordingly, inconsistency among the constraints on the weights arises while solving the problem. Therefore, some of the constraints have to be dropped, resulting in a loss of information on the preference structure, and hence an increase in the total number of questions. In this article we develop a hybrid representation scheme to avoid this problem. The proposed scheme is implemented within the algorithmic framework of the method of Zionts and Wallenius, and its underlying theory is developed. Computational results show that the number of questions required by the Zionts and Wallenius method can be sinificantly reduced using the proposed scheme.     

线性系统的鲁棒容错控制设计方法

考虑了线性故障系统的鲁棒容错控制问题。利用状态反馈特征结构配置参数化结果,提出了一种鲁棒容错控制设计方法。该方法将故障系统的鲁棒容错控制问题转化为含有约束的最小化问题。数值算例及其仿真结果验证了所设计方法的简单性和有效性。     

A descent approach to solving the complementary programming problem

In recent years, much attention has focused on mathematical programming problems with equilibrium constraints. In this article we consider the case where the constraints are complementarity constraints. Problems of this type arise, for instance, in the design of traffic networks. We develop here a descent algorithm for this problem that will converge to a local optimum in a finite number of iterations. The method involves solving a sequence of subproblems that are linear programs. Computational tests comparing our algorithm with the branch-and-bound algorithm in [7] bear out the efficacy of our method. When solving large problems, there is a definite advantage to coupling both methods. A local optimum incumbent provided by our algorithm can significantly reduce the computational effort required by the branch-and-bound algorithm.     

Variations on a cutting plane method for solving concave minimization problems with linear constraints

A cutting plane method for solving concave minimization problems with linear constraints has been advanced by Tui. The principle behind this cutting plane has been applied to integer programming by Balas, Young, Glover, and others under the name of convexity cuts. This paper relates the question of finiteness of Tui's method to the so-called generalized lattice point problem of mathematical programming and gives a sufficient condition for terminating Tui's method. The paper then presents several branch-and-bound algorithms for solving concave minimization problems with linear constraints with the Tui cut as the basis for the algorithm. Finally, some computational experience is reported for the fixed-charge transportation problem.     

A partitioning technique for obtaining solutions to the modularization problem

A significant problem in electronic system design is that of partitioning the functional elements of an equipment schematic into subsets which may be regarded as modules. The collection of all such subsets generated by a particular partitioning forms a potential modular design. The specific problem is to determine that partitioning of the schematic that minimizes a cost function defined on the subsets subject to specified hardware, design, packaging, and inventory constraints. This problem is termed the modularization problem. This paper presents a method for obtaining restricted solutions to the modularization problem by employing some recent developments in linear graph theory obtained by one of the coauthors. Numerical results from the solution of several typical problems are presented.     

Concise RLT forms of binary programs: A computational study of the quadratic knapsack problem

The reformulation‐linearization technique (RLT) is a methodology for constructing tight linear programming relaxations of mixed discrete problems. A key construct is the multiplication of “product factors” of the discrete variables with problem constraints to form polynomial restrictions, which are subsequently linearized. For special problem forms, the structure of these linearized constraints tends to suggest that certain classes may be more beneficial than others. We examine the usefulness of subsets of constraints for a family of 0–1 quadratic multidimensional knapsack programs and perform extensive computational tests on a classical special case known as the 0–1 quadratic knapsack problem. We consider RLT forms both with and without these inequalities, and their comparisons with linearizations derived from published methods. Interestingly, the computational results depend in part upon the commercial software used. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

An algorithm for solving general fractional interval programming problems

A Linear Fractional Interval Programming problem (FIP) is the problem of extremizing a linear fractional function subject to two-sided linear inequality constraints. In this paper we develop an algorithm for solving (FIP) problems. We first apply the Charnes and Cooper transformation on (FIP) and then, by exploiting the special structure of the pair of (LP) problems derived, the algorithm produces an optimal solution to (FIP) in a finite number of iterations.     

求最大数目不相交多约束QoS路由的一种新方法

针对多约束QoS路由问题中从资源点到目的点的最大数目的不相交路由,文章给出了一种基于罚函数与整数规划的求满足QoS约束的最大数目的互不相交路由算法。该算法利用了路由模型的结构特性,使整数规划问题转化为线性规划问题,初步的算例表明算法是有效的。     

Contract award analysis by mathematical programming

ABSTRACT A large manufacturer of telephone directories purchases about 100,000 tons of paper annually from several paper mills on the basis of competitive bids. The awards are subject to several constraints. The principal company constraint is that the paper must be purchased from at least three different suppliers. The principal external constraints are: 1) one large paper mill requires that if contracted to sell the company more than 50,000 tons of paper, it must be enabled to schedule production over the entire year; 2) the price of some bidders is based on the condition that their award must exceed a stipulated figure. The paper shows that an optimal purchasing program corresponds to the solution of a model which, but for a few constraints, is a linear programming formulation with special structure. The complete model is solved by first transforming it into an almost transportation type problem and then applying several well-known L.P. techniques.     

A linear programming solution to the generalized rectangular distance weber problem

The Weber Problem generalized to the location of several new points with respect to existing points is formulated as a linear programming problem under the assumption that distances are rectangular. The dual problem is then formulated and subsequently reduced to a problem with substantially fewer variables and constraints than required by an existent alternative linear programming formulation. Flows may exist between new as well as between new and existing points. Linear constraints can be imposed to restrict the location of new points. Pairwise constraints limiting distances between new points and between new and existing points can also be accommodated.     

Benders' partitioning scheme applied to a new formulation of the quadratic assignment problem

In this paper we present a new formulation of the quadratic assignment problem. This is done by transforming the quadratic objective function into a linear objective function by introducing a number of new variables and constraints. The resulting problem is a 0-1 linear integer program with a highly specialized structure. This permits the use of the partitioning scheme of Benders where only the original variables need be considered. The algorithm described thus iterates between two problems. The master problem is a pure 0-1 integer program, and the subproblem is a transportation problem whose optimal solution is shown to be readily available from the master problem in closed form. Computational experience on problems available in the literature is provided.     

Optimization methods for large-scale multiechelon stockage problems

I examine the problem of determining inventory stockage levels and locations of different parts in a multiechelon system. This stockage problem is complicated by parts commonality—each part may be used by several different end items. Stockage levels and locations of each part affect the availability of end items that use the part, since an end item will be out of service if it requires a part that is not available. Of course, if the part is available at another nearby location, then the end item will be out of service for a shorter period of time. An essential feature of any model for this problem is constraints on operational availability of the end items. Because these constraints would involve nonconvex functions if the stockage levels were allowed to vary continuously, I formulate a 0–1 linear optimization model of the stockage problem. In this model, each part can be stocked at any of a number of prespecified levels at each echelon. The model is to minimize stockage cost of the selected items subject to the end-item availability constraints and limits on the total weight, volume, and number of different parts stocked at each echelon. Advantages and disadvantages of different Lagrangian relaxations and the simplex method with generalized upper-bounding capability are discussed for solving this stockage model.     

Statistical decision analysis of stochastic linear programming problems

This paper presents a statistical decision analysis of a one-stage linear programming problem with deterministic constraints and stochastic criterion function. Procedures for obtaining numerical results are given which are applicable to any problem having this general form. We begin by stating the statistical decision problems to be considered, and then discuss the expected value of perfect information and the expected value of sample information. In obtaining these quantities, use is made of the distribution of the optimal value of the linear programming problem with stochastic criterion function, and so we discuss Monte Carlo and numerical integration procedures for estimating the mean of this distribution. The case in which the random criterion vector has a multivariate Normal distribution is discussed separately, and more detailed methods are offered. We discuss dual problems, including some relationships of this work with other work in probabilistic linear programming. An example is given in Appendix A showing application of the methods to a sample problem. In Appendix B we consider the accuracy of a procedure for approximating the expected value of information.     

A linear-programming-based method for determining whether or not n demand points are on a hemisphere

Whenever n demand points are located on a hemisphere, spherical location problems can be solved easily using geometrical methods or mathematical programming. A method based on a linear programming formulation with four constraints is presented to determine whether n demand points are on a hemisphere. The formulation is derived from a modified minimax spherical location problem whose Karush-Kuhn-Tucker conditions are the constraints of the linear program. © 1993 John Wiley & Sons, Inc.     

The payment scheduling problem

Large complicated projects with interdependent activities can be described by project networks. Arcs represent activities, nodes represent events, and the network's structure defines the relation between activities and events. A schedule associates an occurrence time with each event: the project can be scheduled in several different ways. We assume that a known amount of cash changes hands at each event. Given any schedule the present value of all cash transactions can be calculated. The payment scheduling problem looks for a schedule that maximizes the present value of all transactions. This problem was first introduced by Russell [2]; it is a nonlinear program with linear constraints and a nonconcave objective. This paper demonstrates that the payment scheduling problem can be transformed into an equivalent linear program. The linear program has the structure of a weighted distribution problem and an efficient procedure is presented for its solution. The algorithm requires the solution of triangular systems of equations with all matrix coefficients equal to ± or 0.     

Approximate dynamic programming methods for an inventory allocation problem under uncertainty

We propose two approximate dynamic programming methods to optimize the distribution operations of a company manufacturing a certain product at multiple production plants and shipping it to different customer locations for sale. We begin by formulating the problem as a dynamic program. Our first approximate dynamic programming method uses a linear approximation of the value function and computes the parameters of this approximation by using the linear programming representation of the dynamic program. Our second method relaxes the constraints that link the decisions for different production plants. Consequently, the dynamic program decomposes by the production plants. Computational experiments show that the proposed methods are computationally attractive, and in particular, the second method performs significantly better than standard benchmarks. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Computing bounds for the optimal value in linear programming

Consider a standard linear programming problem and suppose that there are bounds available for the decision variables such that those bounds are not violated at an optimal solution of the problem (but they may be violated at some other feasible solutions of the problem). Thus, these bounds may not appear explicitly in the problem, but rather they may have been derived from some prior knowledge about an optimal solution or from the explicit constraints of the problem. In this paper, the bounds on variables are used to compute bounds on the optimal value when the problem is being solved by the simplex method. The latter bounds may then be used as a termination criteria for the simples iterations for the purpose of finding a “sufficiently good” near optimal solution. The bounds proposed are such that the computational effort in evaluating them is insignificant compared to that involved in the simplex iterations. A numerical example is given to demonstrate their performance.     

Intersection cuts from outer polars of truncated cubes

A truncated cube, by which we mean the convex hull of a subset of the vertices of the unit cube, has an outer polar whose facets are a subset of the facets of the octahedron (the outer polar of the cube). We discuss procedures for generating valid truncations of the cube from the problem constraints, in the case of 0-1 integer programs, and for intersecting the halflines defined by the constraints that are tight for a basic solution to the linear program, with successive facets of the outer polars of these truncated cubes. The cutting planes obtained in this way are compared to other cuts.