Assessment of the ballistic response of honeycomb sandwich structures subjected to offset and normal impact

In the present study, experimental and numerical investigations were carried out to examine the behavior of sandwich panels with honeycomb cores. The high velocity impact tests were carried out using a compressed air gun. A sharp conical nosed projectile was impacted normally and with some offset distance(20 mm and 40 mm). The deformation, failure mode and energy dissipation characteristics were obtained for both kinds of loading. Moreover, the explicit solver was run in Abaqus to create the fin...     

Mechanical stress and deformation analyses of pressurized cylindrical shells based on a higher-order modeling

In this research, mechanical stress, static strain and deformation analyses of a cylindrical pressure vessel subjected to mechanical loads are presented. The kinematic relations are developed based on higherorder sinusoidal shear deformation theory. Thickness stretching formulation is accounted for more accurate analysis. The total transverse deflection is divided into bending, shear and thickness stretching parts in which the third term is responsible for change of deflection along the thicknes...     

使用位置量测值乘积的多目标跟踪(一)

本文主要介绍用于多目标跟踪(MTT)中航迹保持的对称量测方程(SME)滤波器的继续研究。与其他的MTT方法比较起来,在SME滤波器中,为了进行目标状态估计,没有必要考虑目标/量测互联,这将导致MTT问题计算复杂性的实质性的简化。本文集中在由原始位置量测值的积构成的和产生SME的情况。对于其运动包括围绕等速轨迹随机扰动的N个目标情况研制了SME滤波器。假设x坐标位置的量测值是可得到的,并假定量测数等于目标个数。研究了SME滤波器的各种解析特征,尤其是证明了:在极不充分的条件下,估计误差方程是局部指数稳定的。通过把SME滤波器与最佳(最小方差)估计器比较和在六个目标情况下进行的计算机模拟研究了SME滤波器的性能。     

俄海军面临第五次复兴

第二次世界大战后,苏联经过40多年的发展,形成了一只可以和美国在全球争霸的远洋作战海军。苏联解体后．由于俄罗斯经济长期萧条．俄罗斯海军也面临着前所未有的严峻局面。1989年苏联的造船工业共为其海军制造了78艘潜艇、作战舰艇及勤务舰船,而1995、1996、1997年俄罗斯海军分别只有11、8、6艘新造舰艇服役,到了1999年则只有4艘。     

CYLINDRICITY ERROR COMPENSATION IN DIAMOND TURNING VIA P－INTEGRATOR REPETITIVE CONTROL

ＣＹＬＩＮＤＲＩＣＩＴＹＥＲＲＯＲＣＯＭＰＥＮＳＡＴＩＯＮＩＮＤＩＡＭＯＮＤＴＵＲＮＩＮＧＶＩＡＰ－ＩＮＴＥＧＲＡＴＯＲＲＥＰＥＴＩＴＩＶＥＣＯＮＴＲＯＬＬｉＳｈｅｎｇｙｉ（ＤｅｐａｒｔｍｅｎｔｏｆＭｅｃｈａｎｔｒｏｎｉｃｓａｎｄＩｎｓｔｒｕｍｅｎｔ...     

基于神经网络的超精密机床伺服进给非线性模型辨识

以双轴Ｔ型结构的超精密金刚石车床的伺服进给系统为研究对象,采用自构造神经网络技术,建立了系统的非线性动态数学模型,为系统非线性控制与补偿提供参考模型     

树形挠性多体系统的 Kane 动力学方程 ——一种面向计算机的建模方法

本文针对具有树形结构的空间挠性多体系统,建立了Kane 动力学模型。挠性多体系统由任意数目的挠性体或刚体组成,假定铰链点之间具有三自由度相对转动和平动,选取相对平动速度和转动角速度,以及模态坐标的导数为系统的广义速度,建立了系统的最小维数运动方程,所得结果便于计算机自动生成和进行数值仿真。     

声发射分析用于轴承状态监测的研究

为了对轴承局部损伤进行自动检测与诊断,本文对声发射分析的新方法进行了探讨。损伤的特征量由短时信号处理技术来提取,用模式识别技术进行分析,用散布矩阵进行评价。实验和分析的结果表明这种新方法优于振动分析法。     

Natural vibration of cantilever porous twisted plate with variable thickness in different directions

In this paper, the blade is assumed to be a rotating variable thickness cantilever twisted plate structure,and the natural vibrations of variable thickness cantilever twisted plate made of metal porous material are studied. It is assumed that the thickness of the plate changes along spanwise direction and chordwise direction, respectively, and it changes in both directions. The classical thin shell theory, the first and second fundamental forms of surface and von Karman geometric relationship ar...     

跟踪系统的计算机辅助设计

本文介绍利用系数平面模型、回路波德图及二阶示性函数最小化技术实现跟踪系统人—机对话计算机辅助设计的方法。应用经典示性函数,将设计方案直接与适当的现行工程设计相联系,重点放在系数平面的通用区。结合具体实例,用示意图说明在系统发生变化的情况下,应用硬件反馈装置可减小性能的变化。利用观测器,以状态变量为基础的等效设计不会减小性能的变化。采用最小平方误差算法,可实现与性能指标相适应的低阶补偿器。