确定初级分布式战术C~3I系统体系结构的方法

集中说明了虚拟技术在系统建模、计算机系统以及组网连接上的应用,重点探讨了在虚拟技术基础上构建初级分布式战术Ｃ３Ｉ系统体系结构的原理和方法。是文献〔１〕的续文     

项目管理模式下的装备研制合同管理的研究（续）

3．装备研制合同项目的管理流程 按照装备研制合同管理的管理流程,结合项目管理的特点,将装备研制合同项目划分为如下四个阶段：装备研制合同项目概念阶段（合同订立阶段）、装备研制合同项目开发阶段（合同履行计划阶段）、装备研制合同项目实施阶段（合同履行阶段）、装备研制合同项目收尾阶段（合同结束阶段）。     

现代花园洋房设计方法

花园洋房是具有悠久历史的住宅产品,现代花园洋房日益受到喜爱。为适应现代居住舒适、经济、安全的要求,寻求更加适合现代社会居住的花园洋房设计方法,基于花园洋房发展趋势与设计思想分析,结合具体设计方案,着重探讨套型叠加、空间过渡、下沉空间和洋房电梯等设计方法,从而为现代花园洋房设计方法的优化提供借鉴。     

故障诊断效率与评估

叙述了电子设备故障诊断系统所进行检测的不同安排顺序对故障诊断效率的影响.提出了适当的检测顺序与检测方式,提高检查效率,缩短检查过程.还分析了每次进行故障诊断结果确诊或误诊随机现象,评判诊断准确率是抽样检验问题.引入假设检验方法,对设备故障诊断系统的准确率进行评判.对建造设备故障诊断系统有参考价值.     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Numerical investigation of the shockwave overpressure fields of multi-sources FAE explosions

Shockwaves from fuel-air explosive (FAE) cloud explosions may cause significant casualties. The ground overpressure field is usually used to evaluate the damage range of explosion shockwaves. In this paper, a finite element model of multi-sources FAE explosion is established to simulate the process of multiple shockwaves propagation and interaction. The model is verified with the experimental data of a fourfold-source FAE explosion, with the total fuel mass of 340 kg. Simulation results show that the overpressure fields of multi-sources FAE explosions are different from that of the single-source. In the case of multi-sources, the overpressure fields are influenced significantly by source scattering distance and source number. Subsequently, damage ranges of overpressure under three different levels are calculated. Within a suitable source scattering distance, the damage range of multi-sources situation is greater than that of the single-source, under the same amount of total fuel mass. This research provides a basis for personnel shockwave protection from multi-sources FAE explosion.     

电磁轨道发射中内弹道动力响应特性分析

将轨道简化为移动载荷作用下固定在弹性支撑上的Bernoulli-Euler梁,通过静态电磁-结构耦合有限元模型求得外围封装的等效刚度,计算得到发射器的临界速度。另外,利用混合有限元/边界元法建立电磁-结构-运动多物理场耦合的动力学模型,求得枢轨动态接触压力和轨道的应力应变分布特性。通过在轨道背面布置光纤光栅应变传感器,利用测量数据验证了动力响应特性,并分析了弹丸在内弹道的稳定性。针对典型30 mm × 30 mm矩形口径发射器,分析及试验结果表明：C型电枢对轨道的电磁挤压力在平顶沿起始时刻达到最大值,之后随着时间推移逐渐减小;电枢通过引起的应力波在高速段容易与轨道中反射应力波发生共振,并且轨道在电枢运动的中间高速段区域受力最为集中,应力集中水平约是起始低速段区域的2.44倍;电枢运动高速段会出现晃动现象,进而引起上下轨道受力的不对称性。分析及试验结果对研究电磁轨道发射器内弹道动力响应特性和发射器结构设计具有重要指导意义。     

An economic two-stage screening procedure with a prescribed outgoing quality in logistic and normal models

An economic two-stage screening procedure based on a dichotomous performance variable T and a continuous screening variable X is proposed. X is measured first to decide whether an item should be accepted, rejected, or additional observations should be taken. If no terminal decision is reached, T is then observed to classify the undecided items. Two models are considered; (i) the logistic model, where P(T = 1|X = x) is assumed to be a logistic function of x, and (ii) the normal model, where X given T is assumed to be normally distributed. A simple economic model based on inspection and misclassification costs is constructed. Optimal cutoff values on the screening variable are obtained by minimizing the expected cost subject to the constraint that the average outgoing quality attains a pre-specified level. Solutions are provided for both known-parameter and unknown-parameter cases. © 1995 John Wiley & Sons, Inc.     

Economic screening procedures in logistic and normal models

Economic screening procedures based on a continuous screening variable X in place of a dichotomous performance variable T are presented. Optimal critical values on the screening variable minimizing the expected cost are obtained for two models; it is assumed that X given T is normally distributed in normal model and P[T = 1|X] is a logistic function of X in the logistic model, and that costs are incurred by screening inspection and misclassification errors. Cases where some parameters are unknown are also considered.     

实施“采标”技术标准战略 夯实核心技术基础推动产品研发能力的提升与创新

在市场激烈的竞争中,北方重工围绕产品创新这一企业发展的永恒主题,紧紧抓住采用国际标准和国外先进标准这把打开市场的金钥匙,瞄准国外先进标准和技术,制定起点高、技术含量高的企业产品标准,乃至国家标准、行业标准,打造企业品牌。多年来,北方重工集团以科学发展观为统领,大力开展科技创新,知识产权创造,技术标准推动,