Cyclical schedules for the joint replenishment problem with dynamic demands

The Joint Replenishment Problem (JRP) involves production planning for a family of items. The items have a coordinated cost structure whereby a major setup cost is incurred whenever any item in the family is produced, and an item-specific minor setup cost is incurred whenever that item is produced. This paper investigates the performance of two types of cyclical production schedules for the JRP with dynamic demands over a finite planning horizon. The cyclical schedules considered are: (1) general cyclical schedules—schedules where the number of periods between successive production runs for any item is constant over the planning horizon—and (2) power-of-two schedules—a subset of cyclical schedules for which the number of periods between successive setups must be a power of 2. The paper evaluates the additional cost incurred by requiring schedules to be cyclical, and identifies problem characteristics that have a significant effect on this additional cost. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 577–589, 1997.     

The reliability of a series system of repairable subsystems: A bayesian approach

Consider the problem of estimating the reliability of a series system of (possibly) repairable subsystems when test data and historical information are available at the component, subsystem, and system levels. Such a problem is well suited to a Bayesian approach. Martz, Waller, and Fickas [Technometrics, 30 , 143–154 (1988)] presented a Bayesian procedure that accommodates pass/fail (binomial) data at any level. However, other types of test data are often available, including (a) lifetimes of nonrepayable components, and (b) repair histories for repairable subsystems. In this article we describe a new Bayesian procedure that accommodates pass/fail, life, and repair data at any level. We assume a Weibull model for the life data, a censored Weibull model for the pass/fail data, and a power-law process model for the repair data. Consequently, the test data at each level can be represented by a two-parameter likelihood function of a certain form, and historical information can be expressed using a conjugate family of prior distributions. We discuss computational issues, and use the procedure to analyze the reliability of a vehicle system. © 1994 John Wiley & Sons, Inc.     

Sole sourcing versus dual sourcing under stochastic demands and lead times

The use of a single vendor for each inventoried item is usually assumed in most of the inventory models. However, there are situations where the use of more than one vendor should be considered, especially when lead times are stochastic. This research presents a theoretical investigation of the effect of cost structures on the relative performance of sole-sourcing versus dual-sourcing inventory control policies. We show that except for cases where the ordering cost is high, the lead-time variability is low, or the customer service level is low, dual sourcing performs better than sole sourcing under the normally distributed demand and shifted-exponential lead times. Moreover, the computational results indicate the dual sourcing provides a better service level than sole sourcing at the optimal solutions, and that dual sourcing results in larger order quantities than sole sourcing, which suggests that attractive quantity discounts may not be in jeopardy when dual sourcing is employed. Finally, because it is generally known that multiple sourcing can enhance the competition among suppliers, material managers should consider splitting purchase orders when two equally qualified suppliers are available. © 1994 John Wiley & Sons, Inc.     

Mixture selection for maximal stochastic performance

Methodology for the optimal selection of a mixture of components for the attainment of a required performance level is developed. This accommodates both cost and stochastic variation and is applied to gasoline blending. © 1994 John Wiley & Sons, Inc.     

Properties of a three-dimensional estimator

A large-scale simulation was conducted to investigate the statistical properties and the suitability of an estimator that estimates the coordinates of a three-dimensional source, according to the angles at which several observers view the source. The estimator uses a heuristical averaging method of estimates obtained from the solution of six two-dimensional problems that utilize line-to-point transformations. The estimator was found to be approximately unbiased with low standard deviations for normal error distributions. An effective and easy-to-use forecasting formula was developed to forecast the parameters of the distributions of the estimates. © 1994 John Wiley & Sons, Inc.     

Estimating moments of the minimum order statistic from normal populations—a bayesian approach

Let Yⁱ ∽ N(θⁱ, σ), i = 1, …, p, be independently distributed, where θⁱ and σ are unknown. A Bayesian approach is used to estimate the first two moments of the minimum order statistic, W = min (Y¹, …, Y^p). In order to compute the Bayes estimates, one has to evaluate the predictive densities of the Yⁱ's conditional on past data. Although the required predictive densities are complicated in form, an efficient algorithm to calculate them has been developed and given in the article. An application of the Bayesian method in a continuous-review control model with multiple suppliers is discussed. © 1994 John Wiley & Sons, Inc.     

Employment and utilization of engineers among defense contractors

Defense contractors retain engineers for two reasons. First, engineers work on current-period production contracts. Second, engineers conduct independent research and development (IR&D) and write bids and proposals (B&P) for future contracts. The amount of IR&D/B&P activity, however, understates the amount of effort devoted to learning that reduces the cost of future production. Even some engineers who work on current-period production may engage in learning, as a by-product of their efforts. This article develops and implements a model for estimating the volume of learning activity undertaken by four large manufacturers of military aircraft. © 1994 John Wiley & Sons, Inc.     

Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.     

A platform for initial testing of multiple camouflage patterns

The human visual system is still an important factor in military warfare; military personnel receive training on effective search strategies, and camouflage that can effectively conceal objects and personnel is a key component of a successful integrated survivability strategy. Previous methods of camouflage assessment have, amongst others, used psychophysics to generate distinctiveness metrics. However, the population from which the human observers are drawn is often not well defined, or necessarily appropriate. In this experiment we designed a new platform for testing multiple patterns based on a camouflaged object detection task, and investigate whether trained military observers perform better than civilians. We use a two-alternative forced choice paradigm, with participants searching images of woodland for a replica military helmet displaying Olive Green, Multi Terrain Pattern, US Marine Pattern or, as a conspicuous control, UN Peacekeeper Blue. Our data show that there is no difference in detection performance between the two observer groups but that there are clear differences in the effectiveness of the different helmet colour patterns in a temperate woodland environment. We conclude that when tasks involve very short stimulus presentation times, task-specific training has little effect on the success of target detection and thus this paradigm is particularly suitable for robust estimates of camouflage efficacy.