EMS磁浮列车的轨道共振和悬浮控制系统设计

主要从悬浮控制系统设计的角度来解决磁浮列车的轨道共振问题,研究鲁棒状态观测器的设计,讨论观测器参数的选择方法。仿真和实验的结果表明,所设计的悬浮控制系统可以消除轨道共振,实现磁浮列车的稳定悬浮     

基于3Dmax和OGRE的某型装备视景仿真研究*

某型装备视景仿真的研制对于提高教学质量和训练水平具有重要意义.提出了一种基于3Dmax和OGRE可视类的视景仿真方法,给出了视景仿真系统的总体结构和实现过程,解决了视景仿真过程中一些视点变换、角度控制、场景变化、面板仿真等关键的技术问题.     

基于matlab的机载SAR干扰功率仿真系统

为提高设计机载SAR(合成孔径雷达)干扰功率计算的效率,在matlab (MATrix LABoratory)软件平台上结合数学模型和数字信号处理理论建立了机载SAR干扰功率计算模型,并在此基础上进行了仿真.系统对点目标回波信号、分布式地物回波信号和干扰信号的处理过程建立了数学模型并进行了计算机仿真,对仿真结果进行了深入分析,得出了实用的结论.系统具有显示的直观性、实时性与逼真性,而且具有很强的扩展性,可用于与机载SAR有关的教学、科研与试验分析.典型仿真范例及结果表明用matlab仿真机载SAR干扰功率系统是方便和高效的.     

Bayesian enhanced decision making for deteriorating repairable systems with preventive maintenance

Since a system and its components usually deteriorate with age, preventive maintenance (PM) is often performed to restore or keep the function of a system in a good state. Furthermore, PM is capable of improving the health condition of the system and thus prolongs its effective age. There has been a vast amount of research to find optimal PM policies for deteriorating repairable systems. However, such decisions involve numerous uncertainties and the analyses are typically difficult to perform because of the scarcity of data. It is therefore important to make use of all information in an efficient way. In this article, a Bayesian decision model is developed to determine the optimal number of PM actions for systems which are maintained according to a periodic PM policy. A non‐homogeneous Poisson process with a power law failure intensity is used to describe the deteriorating behavior of the repairable system. It is assumed that the status of the system after a PM is somewhere between as good as new for a perfect repair and as good as old for a minimal repair, and for failures between two preventive maintenances, the system undergoes minimal repairs. Finally, a numerical example is given and the results of the proposed approach are discussed after performing sensitivity analysis. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

虚拟样机在火炮研制及评估中的应用研究

介绍仿真的重要性 ,对虚拟样机的优点进行了概述 ,讨论了火炮的拓扑结构和自由度 ,并建立了各体局部坐标系。首次将 ADAMS的应用引入到装备仿真领域 ,介绍了机械系统仿真分析平台 ADAMS及装备虚拟样机建立的步骤 ,结合Fortran语言编程在 ADAMS环境下建立了装备虚拟样机 ,算例仿真结果证明了武器装备模型及其虚拟样机建立的正确性。基于虚拟样机仿真 ,制定了火炮故障评估方案 ,提出故障评判函数的概念。最后展望了虚拟样机技术在武器装备领域的应用前景     

导弹落点散布的序贯概率比(SPR)检验的随机模拟

本文简述了对导弹落点散布的SPR检验的随机模拟的步骤和计算公式。对于落点的标准偏差进行了序贯截尾和不截尾的随机模拟,并对所得结朱进行了初步的分析。分析表明:通过随机模拟得到的OC 函数L~*(σ)优于由近似公式计算的L(σ),而E_σ~*(n)比E_σ(n)要大,所以在选择参数α、β和λ时利用L~*(σ)和E_σ~*(n),同时参考L(σ)和E_σ(n)比较好。本文对截尾方案进行了讨论,对某些问题提出了一些看法。     

A method for quadratic programming

A solution to the quadratic programming is presented with the constraint of the form Ax ≥ b using the linear complementary problem approach.     

固体火箭发动机燃烧室内一维两相变截面流动

本文在固体火箭发动机燃烧室中两相流动基本方程的基础上,导出了同时考虑侵蚀燃烧和两相流动的计算方程组,详细讨论了方程的数值求解方法,分析了侵蚀燃烧引起的通道横截面积沿长度的变化和两相流动对压力—时间曲线及燃烧室流场的影响,有利于准确预估压力—时间曲线和理论计算燃烧室中的流场。     

战场态势一致性技术专题讲座(二) 第3讲 战术数据链航迹处理

文章介绍了数据链的基本概念。美军最典型的战术数据链是16号链,描述了16号链的航迹消息和航迹处理流程,详细分析了航迹质量计算方法、数据配准、航迹相关/解相关、报告职责、航迹协调等关键技术与方法,简要概述了装备应用水平。