Market entry strategy in the presence of market spillovers and efficiency differentiation

Firms form various alliances or use brand extensions to enter new markets in order to improve their operational efficiency and create a positive spillover. However, they do not always know the implications of these strategies for market entry and multimarket competition because the sale of products in one market can have negative spillover effects on product sales in other markets. We present an analytical framework to examine whether and how (i.e., by choosing alliance entry or independent entry) competing firms should enter a market in a situation where market spillovers occur when a firm enters a spillover-producing market to sell products that may increase or decrease the consumers' willingness to pay for products in the primary market. Our analysis shows that the operational efficiency (or quality differentiation ability) of firms in a spillover-producing market varies, and hence, the impact of market spillovers differs for firms. We identify the key factors, such as bargaining power, brand value difference in the primary market, and the extent of efficiencies and spillovers, that determine the firms benefitting from the different entry strategies. Specifically, we show that firms would be more willing to choose an alliance strategy to enter a spillover-producing market if the negative spillover is small and alliance efficiency is high. In contrast, if an alliance entry is not favored, the firms' relative operational efficiency is crucial for them to decide whether to enter the market independently under moderate spillover conditions. Finally, we show the implications of market entry strategies for managers.     

Experimental and numerical investigation of zirconium jet performance with different liner shapes design

This paper studies the shaped charge jet performance in terms of different liner shapes including conical,bell,hemispherical and bi-conical liners.The critical angles and the relevant flow velocities for the zir-conium liner material were calculated analytically and numerically using Autodyn hydro-code.The relationship between the critical collapse angle and the flow velocity was determined for the conditions of jet formation and coherency.Penetration tests according to the standard testing procedures of API-RP34 (Section-Ⅱ) were performed to validate the numerical predictions of the jet performance of the studied liners.It was found that the four shaped charge liners all produced coherent jets with different performances.The penetration depth of the shaped charges with the bell and the bi-conical liner shapes increased by 10.3％ and 22％,respectively,while the crater diameter of shaped charge with hemispherical liner increased by 85％ representing the formation of an explosively-formed-projectile (EFP),when they are compared with the corresponding jet characteristics of a conical liner shaped charge.     

雷达信号仿真中箔条干扰回波模型研究

雷达信号仿真是抗干扰算法研究和验证的有效措施。针对箔条干扰随机信号模型难以满足高精度仿真的需要,本文在分析和总结箔条干扰散射特性和运动特性的基础上,对箔条干扰回波模型进行了更深入和精细化的研究。在Matlab平台上通过编程优化克服了复杂计算的问题,并获得了较好的模拟效果。仿真实验表明,该模型可为精确研究箔条干扰提供数据支持。     

医院供配电系统谐波测量和分析

为治理日趋严重的医院供配电系统谐波污染,需要深入了解医院谐波分布。利用FLUKE 43B对某医院进行现场谐波测试,基于所得数据重点分析了医院供配电系统谐波污染和谐波源分布情况,根据医院谐波污染特点总结了治理方法。结果表明:医院供配电系统存在严重的谐波污染。被测量医院设备先进,种类齐全,测试所得数据具有较强的代表性,可为医院供配电系统谐波研究、谐波治理和滤波设备选择提供基础数据参考。     

南宋四川山地滨江防卫型城池营建研究——以重庆多功城为例

南宋抗蒙斗争时期,四川军民凭借严密的山地滨江网状防御体系成功地抵御了蒙军长达数十年的进攻。为分析、总结这一体系中山地滨江防卫型城池的营建特征,以其中一个重要城池——重庆多功城为代表,从历史沿革、选址、地形地貌、平面布局、周边道路、环境和主要建筑特征等方面进行分析,并结合相关史书资料和其他城池研究成果,总结出南宋四川山地滨江防卫型城池的营建特征:选址依山临水,择险而立;防御设施完善坚固;后勤保障得力。     

基于ANSYS的油罐拱顶稳定性分析

针对加肋拱顶稳定性十分复杂的问题,基于ANSYS建立了加肋拱顶油罐的三维有限元模型,对加肋拱顶的结构稳定性进行了数值模拟。对加肋拱顶在外压作用下的线性与非线性临界屈曲载荷进行了对比分析,利用弧长法获得了拱顶在加肋情况下径向、环向、轴向的载荷-位移曲线。结果表明:数值模拟的加肋拱顶屈曲方向和屈曲区域与实际失稳结果相一致,可以为加肋拱顶设计和稳定性分析提供一定参考。     

超声波辅助微波消解预处理测量污泥金属元素

以实验室污泥和污水厂污泥为研究对象,建立了超声波辅助微波消解预处理测量污泥金属元素的方法与程序。首先通过超声波分散污泥絮体,然后对污泥进行加热预处理和微波消除,最后采用火焰原子吸收法测量污泥中的金属元素。结果表明,150 W超声波作用于25 mL污泥3 min为超声波分散污泥的较优条件,能保证后续操作过程取样均匀。微波消解前适宜的加热预处理条件为90℃,20 min。实验室污泥微波消解的较优酸体系为2 mL双氧水＋4 mL反王水（或4 mL王水）;污水厂污泥微波消解的较优酸体系为1 mL氢氟酸＋2 mL双氧水＋4 mL王水,同时,第3阶段消解条件为压强2.0 MPa下消解20 min。超声波辅助微波消解预处理具有用酸量少、简易快捷、准确度和精密度高等优点,测量K,Ca,Mg,Fe的相对标准偏差≤2.75%,加标回收率为97.5%～102%。     

山水自在 筑鉴非凡——重庆商务职业学院新校区规划设计

介绍了重庆商务职业学院新校区的校园规划策略。基于生态保护进行校园规划,通过建筑布局与地形环境的协调共生形成山水校园,结合历史人文营造个性化校园空间。同时,从生态保护、规划分区、建筑布局、景观空间等方面探讨文化内涵与个性校园的规划设计策略,得出自然山水形成了丰富的地域景观,并由此创造出具有个性的地区文化的结论。旨在为山地校园建设起到借鉴作用。     

基于FLAC^3D的岩土边坡施工效应研究

采用FLAC3D对预应力锚索框架梁支护的岩土边坡施工过程进行数值模拟,围绕施工中坡体位移场与应力场的变化以及下级边坡施工对上部已完成的支挡结构受力影响进行研究.结果表明坡体开挖引起的松弛区呈圆弧状,且位移由临空面向坡体内逐渐减小,坡体弹性模量与其变形呈非线性递减关系;预应力锚索框架梁能有效抑制坡体变形,从坡顶到坡脚锚索轴力依次增大,故工程设计中宜对其分别设计,做到“强腰固脚”;下级边坡与上级边坡的支挡结构相互约束,共同承担滑坡推力,形成一种“联合支挡结构”.     

多目标、多层次设备状态监测与诊断策略研究

在分析大型复杂设备系统特点的基础上,提出了多目标、多层次设备状态监测与诊断的体系结构、诊断策略,并对系统实现方法进行了分析。