Damage modeling of ballistic penetration and impact behavior of concrete panel under low and high velocities

This work presents a numerical simulation of ballistic penetration and high velocity impact behavior of plain and reinforced concrete panels. This paper is divided into two parts. The first part consists of numerical modeling of reinforced concrete panel penetrated with a spherical projectile using concrete damage plasticity (CDP) model, while the second part focuses on the comparison of CDP model and Johnson-Holmquist-2 (JH-2) damage model and their ability to describe the behavior of concrete panel under impact loads. The first and second concrete panels have dimensions of 1500 mm × 1500 mm × 150 mm and 675 mm × 675 mm × 200 mm, respectively, and are meshed using 8-node hexahedron solid elements. The impact object used in the first part is a spherical projectile of 150 mm diameter, while in the second part steel projectile of a length of 152 mm is modeled as rigid element. Failure and scabbing characteristics are studied in the first part. In the second part, the com-parison results are presented as damage contours, kinetic energy of projectile and internal energy of the concrete. The results revealed a severe fracture of the panel and high kinetic energy of the projectile using CDP model comparing to the JH-2 model. In addition, the internal energy of concrete using CDP model was found to be less comparing to the JH-2 model.     

The relationship between decision variables and penalty cost parameter in (Q,R) inventory models

This paper is concerned with the optimum decision variables found using order quantity, reorder point (Q, R) inventory models. It examines whether the optimum variables (Q* and R*) are necessarily monotonic functions of the backorder cost parameter (or equivalently of the performance objective). For a general class of models it is proved that R* must increase as the performance objective is raised, and an inequality condition is derived which governs how Q* will change. Probability distributions of lead time demand are cited or found for which Q* increases, Q* decreases, and Q* is independent of increases in performance objectives or backorder cost parameter.     

On estimating survival for reliability models based on age-related stochastic comparisons

A new class of nonparametric reliability models is introduced and studied. A distribution is said to be better at age s than at age t (sBt) if the residual lifetime at age s is stochastically greater than or equal to the residual lifetime at age t. Applications to various forms of replacement policies, including the cannibalization of failed systems, are noted. For fixed s < t, the problem of estimating a survival curve assumed to belong to the sBt class is addressed using recursive methods. An sBt estimator is derived in closed form, and its uniform strong consistency at an optimal rate of convergence is demonstrated. A simulation study strongly supports the claim that the sBt estimator tends to outperform the empirical survivor function in small- and moderate-size samples. © 1993 John Wiley & Sons, Inc.     

MILITARY EXPENDITURE AND GRANGER CAUSALITY: A CRITICAL REVIEW

A large literature has used tests for Granger (1969) non‐causality, GNC, to examine the interaction of military spending with the economy. Such tests answer a specific although quite limited question: can one reject the null hypothesis that one variable does not help predict another? If one can reject, there is said to be Granger causality, GC. Although the limitations of GNC tests are well known, they are often not emphasised in the applied literature and so may be forgotten. This paper considers the econometric and methodological issues involved and illustrates them with data for the US and other countries. There are three main issues. First, the tests may not be informative about the substantive issue, the interaction of military expenditure and the economy, since Granger causality does not correspond to the usual notion of economic causality. To determine the relationship of the two notions of causality requires an identified structural model. Second, the tests are very sensitive to specification. GNC testing is usually done in the context of a vector autoregression, VAR, and the test results are sensitive to the variables and deterministic terms included in the VAR, lag length, sample or observation window used, treatment of integration and cointegration and level of significance. Statistical criteria may not be very informative about these choices. Third, since the parameters are not structural, the test results may not be stable over different time periods or different countries.     

Unrestricted warfare: Review essay I

During the Nigerian Civil War (1967–1970), France chose to support Biafra, but only on a limited scale, providing mercenaries and obsolete weaponry to Ojukwu's regime. General Charles de Gaulle's assistance to Ojukwu was conditioned by the French military drawdown after 1961, the increased power of French secret services on the continent, and the interventions in Katanga (1960–1963), Gabon (1964) and Chad (1968–1972). France supported Biafra primarily to protect its former colonies from Nigeria, stop Soviet subversion and acquire an economic foothold in the oil-rich Niger Delta. De Gaulle chose a limited strategy for two reasons. If Biafra won the war, France would be Biafra's greatest ally. If Nigeria won the war, France could extricate itself from the situation relatively easily and re-establish relations with the Nigerian government, which is what ultimately occurred.     

Layers of Experiments with Adaptive Combined Design

In the field of nanofabrication, engineers often face unique challenges in resource‐limited experimental budgets, the sensitive nature of process behavior with respect to controllable variables, and highly demanding tolerance requirements. To effectively overcome these challenges, this article proposes a methodology for a sequential design of experiments through batches of experimental runs, aptly named Layers of Experiments with Adaptive Combined Design (LoE/ACD). In higher layers, where process behavior is less understood, experimental regions cover more design space and data points are more spread out. In lower layers, experimental regions are more focused to improve understanding of process sensitivities in a local, data‐rich environment. The experimental design is a combination of a space‐filling and an optimal design with a tuning parameter that is dependent on the amount of information accumulated over the various layers. The proposed LoE/ACD method is applied to optimize a carbon dioxide (epet‐CO2) assisted deposition process for fabricating silver nanoparticles with pressure and temperature variables. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 127–142, 2015     

Single batch machine scheduling with deliveries

We consider the problem of scheduling a set of n jobs on a single batch machine, where several jobs can be processed simultaneously. Each job j has a processing time p_j and a size s_j. All jobs are available for processing at time 0. The batch machine has a capacity D. Several jobs can be batched together and processed simultaneously, provided that the total size of the jobs in the batch does not exceed D. The processing time of a batch is the largest processing time among all jobs in the batch. There is a single vehicle available for delivery of the finished products to the customer, and the vehicle has capacity K. We assume that K = rD, where and r is an integer. The travel time of the vehicle is T; that is, T is the time from the manufacturer to the customer. Our goal is to find a schedule of the jobs and a delivery plan so that the service span is minimized, where the service span is the time that the last job is delivered to the customer. We show that if the jobs have identical sizes, then we can find a schedule and delivery plan in time such that the service span is minimum. If the jobs have identical processing times, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most 11/9 times the optimal service span. When the jobs have arbitrary processing times and arbitrary sizes, then we can find a schedule and delivery plan in time such that the service span is asymptotically at most twice the optimal service span. We also derive upper bounds of the absolute worst‐case ratios in both cases. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 470–482, 2015     

A continuous-review inventory system with lost sales and variable lead time

Using a system-point (SP) method of level crossings, we derive the stationary distribution of the inventory level (stock on hand) in a continuous-review inventory system with compound Poisson demand, Erlang as well as hyperexponentially distributed lead times, and lost sales. This distribution is then used to formulate long-run average cost functions with/without a service level constraint. Some numerical results are also presented, and compared with the Hadley and Whitin heuristic. © 1998 John Wiley & Sons, Inc. Naval Research Logistics 45: 259–278, 1998