导弹攻防对抗作战效能仿真分析方法论

本文介绍了在基于攻防对抗仿真的导弹作战效能分析时应该面对的四个主要环节，提出了采用攻防对抗仿真进行导弹作战效能分析的一般过程。该方法适用于各类导弹等武器系统攻防对抗仿真作战效能研究。     

提速列车车厢减小空气阻力风洞实验研究

列车提速使得其空气阻力明显增大。为了减小空气阻力，列车车厢气动外形的研究变得愈加重要。在低速风洞中获得的实验结果表明，对现型列车车厢局部外形稍加改善，就能使得其空气阻力大为降低。这是实现我国列车提速最为有效的途径之一。     

使用等效偏移角稀疏测量的面阵相机序贯图像几何校正

天基光学相机实际在轨对地观测成像的畸变需通过几何校正抑制。目前主流面阵相机对地观测获得的小尺寸、高帧频序贯图像很难满足传统几何校正方法逐帧解算对单帧图像控制点数量与空域分布的要求且计算量巨大。针对这一问题,提出一种使用等效偏移角稀疏测量的面阵相机序贯观测图像几何校正方法,将逐帧校正参数解算问题转化为时域稀疏测量条件下等效偏移角信号恢复问题,利用等效偏移角信号时频信息可有效降低对单帧图像控制点数量和空域分布要求。通过高分四号卫星面阵相机在轨实测图像数据验证了所提方法的可行性且其能大大降低序贯图像几何校正处理的计算量。     

基于监测数据的电磁频谱地图构建与验证

提出基于广义回归神经网络拟合和聚类克里金的构建方法,通过趋势面拟合,将电磁频谱地图构建分解为路径衰减和阴影衰落分量的估计问题,以提升构建精度;设计监测数据聚类和自适应最优邻域选取机制,在保证构建精度的条件下减小计算数据量,以提升构建速度,从而利用数量有限的电磁环境监测数据,在不需要先验信息的条件下实现电磁频谱地图的准确、快速构建。设计并实现电磁频谱地图验证系统,搭建车载数据采集设备,利用实测电磁环境监测数据,验证所提方法的可行性及构建性能。     

射频识别系统的多目标识别-反碰撞算法

对多目标识别技术的二进制搜索算法、时隙ALOHA算法进行了剖析,并对ALOHA算法用概率论和数理统计的方法进行了深入的理论分析,得出要根据所设计的射频识别系统的特点合理采用各种算法方可得到良好的效果.该算法的实现对提高高速公路上自动收费系统、人员和物流管理等各领域的工作效率具有一定的指导意义.     

牢固树立科学人才观——学习胡锦涛主席关于科学人才观的重要论述

科学人才观是做好人才工作,落实人才强军战略的思想基础。全面理解和践行科学人才观,一要牢固树立人才资源是第一资源、人人都可以成才、以人为本的观念;二要始终坚持党管人才原则,加强各级党委对人才工作的领导;三要构建与科学人才观相适应的军事人才激励机制。     

Inventory policies with quantized ordering

This article studies (nQ, r) inventory policies, under which the order quantity is restricted to be an integer multiple of a base lot size Q. Both Q and r are decision variables. Assuming the one-period expected holding and backorder cost function is unimodal, we develop an efficient algorithm to compute the optimal Q and r. The algorithm is facilitated by simple observations about the cost function and by tight upper bounds on the optimal Q. The total number of elementary operations required by the algorithm is linear in these upper bounds. By using the algorithm, we compare the performance of the optimal (nQ, r) policy with that of the optimal (s, S) policy through a numerical study, and our results show that the difference between them is small. Further analysis of the model shows that the cost performance of an (nQ, r) policy is insensitive to the choice of Q. These results establish that (nQ, r) models are potentially useful in many settings where quantized ordering is beneficial.     

Supply chain coordination with product line design and a revenue sharing scheme

Many manufacturers sell their products through retailers and share the revenue with those retailers. Given this phenomenon, we build a stylized model to investigate the role of revenue sharing schemes in supply chain coordination and product variety decisions. In our model, a monopolistic manufacturer serves two segments of consumers, which are distinguished by their willingness to pay for quality. In the scenario with exogenous revenue sharing ratios, when the potential gain from serving the low segment is substantial (e.g., the low‐segment consumers' willingness to pay is high enough or the low segment takes a large enough proportion of the market), the retailer is better off abandoning the revenue sharing scheme. Moreover, when the potential gain from serving the low (high) segment is substantial enough, the manufacturer finds it profitable to offer a single product. Furthermore, when revenue sharing ratios are endogenous, we divide our analysis into two cases, depending on the methods of cooperation. When revenue sharing ratios are negotiated at the very beginning, the decentralized supply chain causes further distortion. This suggests that the central premise of revenue sharing—the coordination of supply chains—may be undermined if supply chain parties meticulously bargain over it.     

Single‐machine scheduling with deadlines to minimize the total weighted late work

We consider scheduling a set of jobs with deadlines to minimize the total weighted late work on a single machine, where the late work of a job is the amount of processing of the job that is scheduled after its due date and before its deadline. This is the first study on scheduling with the late work criterion under the deadline restriction. In this paper, we show that (i) the problem is unary NP‐hard even if all the jobs have a unit weight, (ii) the problem is binary NP‐hard and admits a pseudo‐polynomial‐time algorithm and a fully polynomial‐time approximation scheme if all the jobs have a common due date, and (iii) some special cases of the problem are polynomially solvable.     

军队思想政治建设实现“三个确保”的路径探索

军队思想政治建设实现"三个确保",必须以强化中国特色社会主义理论体系武装为首要任务;以培育当代革命军人核心价值观为重要抓手;以全面提高完成多样化军事任务能力为实践平台;以加强各级党组织建设为关键环节;以改进创新思想政治工作为强大动力.