多源文本数据真值发现方法

针对传统真值发现算法无法直接应用于文本数据的问题,提出基于深度神经网络面向多源文本数据的真值发现算法(NN_Truth)。根据文本答案多因素性、词语使用多样性以及文本数据稀疏性等特点,将“数据源-答案”向量作为网络输入,识别答案真值向量作为网络输出,依据真值发现的一般假设,无监督学习各数据源答案向量间关联关系,并最终获得答案真值。实验结果表明,该算法适用于文本数据真值发现场景,较基于检索的方法及传统真值发现算法效果更优。     

无人机飞行训练资源配置效率的AHP-Arena综合评价方法

为降低传统层次分析法(analytic hierarchy process,AHP)赋权过程主观片面性影响,提出了一种综合AHP与Arena仿真建模技术的无人机训练资源配置效率评价方法。基于飞行训练流程分析,确定了训练资源配置效率影响因素和效率评价指标,建立了层次型综合评价体系,概括了AHP-Arena综合评价步骤。利用Arena建模软件构建训练流程动态仿真系统并验证有效性,采用单变量数值仿真法、均方差决策法完成了影响因素客观赋权,通过线性加权综合法得出综合评价系数,实现资源配置效率评价与方案优选。实例应用说明了该方法的有效性,同时,该方法可推广至其他类似的训练过程中,亦可为其他多因素、多指标评价决策过程提供借鉴。     

Monitoring and Prediction of the Vibration Intensity of Seismic Waves Induced in Underwater Rock by Underwater Drilling and Blasting

All underwater drilling and blasting operations generate seismic waves.However,due to a lack of suitable vibration sensing instruments,most studies on the propagation of seismic waves have been limited to shorelines near construction areas or wharfs,whereas comparatively few studies have been conducted on the larger seafloor itself.To address this gap,a seafloor vibration sensor system was developed and applied in this study that consists of an autonomous acquisition storage terminal,soft-ware platform,and hole-plugging device that was designed to record the blasting vibration intensities received through submarine rocks at a given measurement point.Additionally,dimensional analyses were used to derive a predictive equation for the strength of blast vibrations that considered the in-fluence of the water depth.By combining reliable vibration data obtained using the sensor system in submarine rock and the developed predictive equation,it was determined that the water depth was an important factor influencing the measured vibration strength.The results using the newly derived equation were compared to those determined using the Sadowski equation,which is commonly used on land,and it was found that predictions using the derived equation were closer to the experimental values with an average error of less than 10％,representing a significant improvement.Based on these results,the developed sensor system and preliminary theoretical basis was deemed suitable for studying the propagation behavior of submarine seismic waves generated by underwater drilling and blasting operations.     

传统的方位定义应用局限性研究

本文分析了传统的方位定义与计算存在的应用局限性根源,提出了适合航海及各种规模军事演练需求的改进的方位定义和计算方法,并分析了两种方位定义下的方位计算误差及适用条件.     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

助推段反TBM装备发展构想

根据战术弹道导弹射程与助推段发动机关机高度和关机点距发射点斜距的关系,比较了2种周边国家和地区的战术弹道导弹助推段发动机关机数据,通过设想的反导武器,分析了对这2种战术弹道导弹拦截的可行性,结合可行性分析结果,提出助推段预警、指控、拦截等反导装备的发展构想。     

新型高速触头驱动机构的分析与设计

针对新型混合型限流断路器对机械触头机构的要求,设计了一种基于高速电磁斥力机构和永磁机构的新型高速机械触头机构.该机构在故障保护时,电磁斥力机构和永磁机构联合动作,驱动动触头快速分闸.永磁机构完成正常工况下触头的分、合闸驱动,并且提供触头在合闸状态的合闸压力及其在分闸状态的分闸保持力.研制了额定320 V/3 kA的高速触头机构样机,对样机进行仿真及试验分析.结果表明:所设计样机初始分离时间为220 μs,动触头完成20 mm行程共用时7 ms,触头平均运动速度为2.9 m/s,其他各项指标也都满足混合型限流断路器要求.     

误差配准在两种纯距离定位算法的应用比较

组网雷达系统中,由于观测信息量的增加,对目标存在多种定位算法。很多情形下,误差配准公式是基于某一定位算法推导而来,误差配准的结果也相应的用来提高此定位算法的定位精度。定位算法的复杂程度不同导致基于此算法推导误差配准公式难度不一致,不同定位算法的定位精度也不尽相同。因此,对两种多距离定位算法的定位精度、误差配准推导难易程度进行了理论分析和仿真计算,给出了定位精度的解析表达式和仿真结果。利用表达式简单的定位算法推导基于最小二乘的误差配准公式,并将误差配准结果反馈给定位精度高的定位算法,以最大程度提高误差配准结果的应用效果,减轻计算复杂度,提高信息的利用度。     

基于C3D辅助的战场传感器监视系统设计与实现

首先介绍了战场传感器监视系统的定义和各国现有典型系统。其次针对战场监视特殊的应用环境,利用C3D辅助技术,将相对定位与基于三维地图环境下的绝对定位相结合,通过坐标转换和地图匹配将位置信息直观准确反映在电子地图上,设计了基于C3D辅助的战场传感器监视系统,并对该系统进行了实现。最后通过对3D-MDS(C,D)定位算法的验证结果表明,在长1000m×7m宽的道路上,布撒120个节点,对于速度为3m/s的装甲车定位误差仅为2.1687米。该系统可对定位算法的定位精度进行评测及误差进行修正,防止由于误差累积造成误差放大。     

Experimental and numerical investigations of interface properties of Ti6Al4V/CP-Ti/Copper composite plate prepared by explosive welding

Explosive welding technique is widely used in many industries. This technique is useful to weld different kinds of metal alloys that are not easily welded by any other welding methods. Interlayer plays an important role to improve the welding quality and control energy loss during the collision process. In this paper, the Ti6Al4V plate was welded with a copper plate in the presence of a commercially pure titanium interlayer. Microstructure details of welded composite plate were observed through optical and scanning electron microscope. Interlayer-base plate interface morphology showed a wavy structure with solid melted regions inside the vortices. Moreover, the energy dispersive spectroscopy analysis in the interlayer-base interface reveals that there are some identified regions of different kinds of chemical equilibrium phases of Cu–Ti, i.e. CuTi, Cu₂Ti, CuTi₂, Cu₄Ti, etc. To study the mechanical properties of composite plates, mechanical tests were conducted, including the tensile test, bending test, shear test and Vickers hardness test. Numerical simulation of explosive welding process was performed with coupled Smooth Particle Hydrodynamic method, Euler and Arbitrary Lagrangian-Eulerian method. The multi-physics process of explosive welding, including detonation, jetting and interface morphology, was observed with simulation. Moreover, simulated plastic strain, temperature and pressure profiles were analysed to understand the welding conditions. Simulated results show that the interlayer base plate interface was created due to the high plastic deformation and localized melting of the parent plates. At the collision point, both alloys behave like fluids, resulting in the formation of a wavy morphology with vortices, which is in good agreement with the experimental results.