高压大容量脉冲电容器保压过程中电压跌落的定量分析

针对金属化膜脉冲电容器在实际使用中由于充电结束以后较长的保压时间而产生电压跌落和能量损失,并最终导致脉冲功率电源系统的实际有效储能和储能密度下降这一实际问题,基于一种高压大容量脉冲电容器电压跌落的实验数据,分别从电导特性、自愈特性、极化特性及其与能量损失的相关性出发,推导了介质薄膜电导率与电压跌落的定量关系并进行了电导率测量实验,推导了自愈能量与电压跌落的定量关系并进行了寿命实验,阐述了松弛极化与电压跌落的定量关系并进行了仿真。结果表明,介质泄漏、自愈以及松弛极化在电压跌落中所占比例分别为29.64%、11.75%及58.35%,导致所研究电容器电压跌落的主要因素是松弛极化。     

Dynamic routing of prioritized warranty repairs

Recent years have seen a strong trend toward outsourcing warranty repair services to outside vendors. In this article we consider the problem of dynamically routing warranty repairs to service vendors when warranties have priority levels. Each time an item under warranty fails, it is sent to one of the vendors for repair. Items covered by higher priority warranty receive higher priority in repair service. The manufacturer pays a fixed fee per repair and incurs a linear holding cost while an item is undergoing or waiting for repair. The objective is to minimize the manufacturer's long‐run average cost. Because of the complexity of the problem, it is very unlikely that there exist tractable ways to find the optimal routing strategies. Therefore, we propose five heuristic routing procedures that are applicable to real‐life problems. We evaluate the heuristics using simulation. The simulation results show that the index‐based “generalized join the shortest queue” policy, which applies a single policy improvement step to an initial state‐independent policy, performs the best among all five heuristics. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2008     

纯方位跟踪问题研究及算法性能

针对纯方位跟踪系统的特点,对修正增益扩展卡尔曼滤波、伪线性滤波、基于无迹变换的卡尔曼滤波、修正球坐标系下的扩展卡尔曼滤波、直接对角度信息建模的卡尔曼滤波等被动目标跟踪算法予以详细的讨论,并在满足可比性的条件下,对各个跟踪算法进行了仿真实验,比较和分析了仿真结果,指出了修正增益扩展卡尔曼滤波的算法优势,对实际工程应用中算法选择问题提出了参考性建议.     

Relaxation method for the solution of the minimax location-allocation problem in euclidean space

A method previously devised for the solution of the p-center problem on a network has now been extended to solve the analogous minimax location-allocation problem in continuous space. The essence of the method is that we choose a subset of the n points to be served and consider the circles based on one, two, or three points. Using a set-covering algorithm we find a set of p such circles which cover the points in the relaxed problem (the one with m < n points). If this is possible, we check whether the n original points are covered by the solution; if so, we have a feasible solution to the problem. We now delete the largest circle with radius r_p (which is currently an upper limit to the optimal solution) and try to find a better feasible solution. If we have a feasible solution to the relaxed problem which is not feasible to the original, we augment the relaxed problem by adding a point, preferably the one which is farthest from its nearest center. If we have a feasible solution to the original problem and we delete the largest circle and find that the relaxed problem cannot be covered by p circles, we conclude that the latest feasible solution to the original problem is optimal. An example of the solution of a problem with ten demand points and two and three service points is given in some detail. Computational data for problems of 30 demand points and 1–30 service points, and 100, 200, and 300 demand points and 1–3 service points are reported.     

复合导引头多源异步信息融合精确拦截算法

针对单一制导体制难以满足现代战场作战需求且多传感器数据更新率不同步的问题,建立一种新的微惯导/毫米波/红外复合制导体制,研究了该体制下多传感器异步信息融合的时间同步和空间配准问题;提出一种自适应无迹卡尔曼滤波算法,该算法采用预测残差构造状态模型误差统计量,通过自适应因子调整状态模型信息对状态参数估值的贡献,有效控制状态模型噪声异常对状态参数估值的影响。将提出的算法应用到微惯导/毫米波/红外复合制导系统中进行仿真验证,结果表明,提出的自适应无迹卡尔曼滤波算法的解算精度高于标准扩展卡尔曼滤波和无迹卡尔曼滤波算法,能有效提高导弹的制导的解算精度。     

应用地面电磁发射清除空间碎片方法

针对传统化学发射的空间碎片清除技术成本过高、难以实施的问题,提出应用地基电磁发射方式的空间碎片清除新方法。通过地面电磁发射的方式以低成本将射弹运送至空间,并通过释放空间微粒云团控制空间碎片离轨,进而实现对空间碎片的清除。由于取消使用占绝大部分成本的化学推进剂,所提出的应用地基电磁发射的空间碎片清除技术为空间碎片低成本清除提供了有效解决途径。     

多级电磁线圈发射器时序触发控制策略

为优化多级同步感应线圈电磁发射器性能,以提高发射速度和能量转换效率为检验指标,以影响上述指标的触发时序为优化对象,采用遗传算法建立单级同步感应线圈型电磁发射器触发位置优化数学模型,计算最佳触发位置,通过数值和有限元两种仿真系统对优化结果的正确性进行验证。采用该方法对两级以及十级同步感应线圈型电磁发射器的触发时序进行优化研究,并进行仿真验证。为解决仿真系统误差问题,提出采用动子线圈在各级的触发位置和速度作为控制因素的双控触发方式,并研究分析仿真过程中触发开关的随机抖动对出口速度误差的影响,得到最佳触发时序控制策略。     

Potential impact of recharging plug‐in hybrid electric vehicles on locational marginal prices

Plug‐in hybrid electric vehicles (PHEVs), upon market penetration, will create additional recharging loads to the electric power systems. This article considers different recharging scenarios and uses game theoretic models to study the potential impact of the recharging loads on locational marginal prices (wholesale electricity prices). Computational results from a Pennsylvania‐New Jersey‐Maryland Interconnection case study show that, under the existing recharging infrastructures, even a small magnitude of load increase caused by PHEV recharging could have a significant undesirable impact on locational marginal prices. The impact could be mitigated to a varying extent by the availability of possible future recharging infrastructures, including realtime pricing recharging meters, battery stations, or vehicle‐to‐grid technology.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

OFDM系统中基于补零DFT信道插值算法的研究

针对OFDM系统中基于补零DFT实现信道插值的算法,对传统的时域方法和变换域方法进行了分析,并提出了一种新的补零方法。首先通过理论分析指出传统的基于补零DFT实现信道插值算法中,时域方法和变换域方法是等效的;通过对信道插值算法中冲激响应估计序列进行补零的分析,指出补零操作是为了重构出冲激响应的N点采样序列(N表示总子载波数),并针对传统补零方法在一定条件下产生的重构误差,提出了一种新的补零方法。仿真结果表明以上理论分析是正确的,新补零方法可以减小一定条件下的重构误差,增强信道插值算法对信道延迟分布的鲁棒性,有效提高系统的性能。