信息知识库中的数据可用性恢复策略

信息知识库在工业生产中能够提高生产效率、降低资源消耗,但数据失效频率高。针对多节点失效重构的纠删码策略较少,且未充分考虑失效数据重构时各参与节点间的链路关系,导致重构效率较低。针对信息知识库数据失效,提出一种新的重构策略。根据节点的数据处理能力,选取数据处理能力最高的新生节点为路由节点;依据路由节点与候选供应节点及剩余空闲节点的链路带宽,确定供应节点及新生节点,从而构建数据重构网络拓扑,提高失效数据重构效率。实验结果证实,与传统纠删码策略性能比较,该方法有较短的重构时间和较高的重构成功率。     

面向故障预测与健康管理的传感器优化配置

传感器优化配置是保证装备故障预测与健康管理(Prognostics and Health Management,PHM)系统有效实现的基础.针对目前陆军装备保障中缺乏有效的传感器配置方法的现状,以某型防空导弹调平起竖系统为研究对象,建立了考虑传感器失效的PHM系统传感器优化配置模型.对导弹发射车调平起竖系统控制回路进行了分析,在此基础上形成系统的故障-传感器相关性矩阵;根据系统的指标要求建立传感器优化配置模型,采用蚁群算法求解;将结果与粒子群算法进行比较,表明利用蚁群算法取得了更优的配置方案,能够为PHM系统中装备的传感器优化配置提供有效指导.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

基于程序设计类课程的教育技术本科生创新思维培养研究与实践

本文基于ATDE创新教育理论,以程序设计类课程为教学阵地,对教育技术本科生创新思维培养做出了相关探索与实践。创新思维是高级的问题解决活动。培养学生的创新思维更多体现在对学生解决问题的策略应用方面。对此,本文通过给出的案例,从不同角度详细介绍了程序设计类课程对培养教育技术本科生创新思维的实施对策,以期对提高本专业建设做出有益的探索。     

基于信号的自动测试系统软件研究

分析了ATLAS 2K语言和IVI-S ignal Interface标准的系统模型和异同点,结合二者,给出了基于信号的自动测试系统软件设计方法,该方案为通用自动测试系统软件设计提供了技术实现途径。     

高等数学与后续相关课程的成绩统计及数理分析

高等数学是大学教育中的主要基础课,与后续课程有密切联系。通过成绩统计和相关性分析,说明高等数学与其后续相关课程之间的关系和影响,提出数学教学的想法。     

从档案看李烈钧与湖口反袁起义

1913年7月12日爆发的江西湖口反袁起义,打响了二次革命战争。革命党人李烈钧充当了反袁急先锋。但当李烈钧由上海回到湖口准备起兵之际,因江西要塞司令陈廷训叛变投敌,北洋精锐第6师李纯部已在九江至沙河一线布防。这样,李烈钧所率领的讨袁军只能仓卒地投入战斗。旅长、左翼司令林虎首先发起攻击,于战斗失利后,旅长、右翼司令方声涛才率部进攻金鸡炮台。因此,李纯得以从容调集兵力,先后击败了讨袁军的左右两翼部队。其时,江西护军使、江西第1师师长欧阳武并不赞同起兵反袁,且加消极抵制,江西第2师师长刘世均更是动摇不定,脚踏双船,加以北洋军又策反一部分江西军队倒戈,这一切严重削弱了讨袁军的战斗力。不久,敌方援军第2师王占元部开抵江西,袁世凯任命的第1军军长段芝贵全权指挥陆军,在海军次长汤芗铭所率海军的配合下攻占了湖口。此后,讨袁军在李烈钧的指挥下,作有序的撤退。瑞昌、德安、南康等地相继陷敌。最后,李烈钧不得不于8月16日撤离,由省城南昌往长沙,辗转赴沪,再赴日本流亡于海外。湖口反袁起义宣告失败。     

集合线对对数周期偶极子天线的影响

主要研究了对数周期偶极子天线.基于Pocklington积分方程和全域基函数,采用矩量法结合网络理论建立了天线算法模型;使用该模型计算了在天线阵和集合线共同作用下天线的辐射方向图,得出了集合线在不同频段上对天线辐射性能的影响,并通过截短延长线长度改善了天线低频段的辐射特性,增强了天线轴向方向性.