基于强迫换流原理的新型真空直流限流断路器

提出了一种基于现有强迫换流型真空直流断路器的改进方案,并通过在高速真空开关两端并联反向续流二极管,使真空开关在电弧电流强迫过零后由于二极管的续流作用得到零电压介质强度恢复时间,提高了真空灭弧室电流过零后的介质强度恢复速度,使真空开关得以在小间隙下分断高上升率的短路电流,提高了传统真空直流断路器的限流、分断能力。设计了限流断路器样机,进行了短路分断试验。试验结果表明:所设计的限流断路器能将最大上升率为20A/μs的短路电流限流至10kA以下,限流分断时间小于1.1ms,满足了现代舰船极限短路故障的保护要求。     

q∝△(T~(-1))传热时三热源热泵的最优性能普遍关系

本文导出工质与三个热源间的传热系数分别为。α、β和γ,传热规律为q~∝△(T~(-1))时,内可逆三热源热泵的最佳供热系数ψ与供热率Π间的关系:ψ<1时,Π=K_1ψ[T_p(T_H-T_ο)-T_H(T_p-Tο)ψ]/[T_HT_pT_ο(1-△_1ψ)~2];ψ>1时,Π=K_2ψ[T_p(T_H-T_ο)-T_H(T_P-T_ο)ψ]/[T_HT_pT_ο(△_2-ψ)~2];式中,K_1=αγ/(α~(1/2)+γ~(1/2))~2,K_2=βγ/(β~(1/2)+γ~(1/2))~2,△_1=(α/β)~(1/2)(β~(1/2)-r~(1/2)/(α~(1/2)+γ~(1/2)),△_2=(β/α)~(1/2)(α~(1/2)-γ~(1/2))/(β~(1/2)+γ~(1/2))。由此可得许多有用的关系。     

Resource allocation with lumpy demand: To speed or not to speed?

In the classical EPQ model with continuous and constant demand, holding and setup costs are minimized when the production rate is no larger than the demand rate. However, the situation may change when demand is lumpy. We consider a firm that produces multiple products, each having a unique lumpy demand pattern. The decision involves determining both the lot size for each product and the allocation of resources for production rate improvements among the products. We find that each product's optimal production policy will take on only one of two forms: either continuous production or lot‐for‐lot production. The problem is then formulated as a nonlinear nonsmooth knapsack problem among products determined to be candidates for resource allocation. A heuristic procedure is developed to determine allocation amounts. The procedure decomposes the problem into a mixed integer program and a nonlinear convex resource allocation problem. Numerical tests suggest that the heuristic performs very well on average compared to the optimal solution. Both the model and the heuristic procedure can be extended to allow the company to simultaneously alter both the production rates and the incoming demand lot sizes through quantity discounts. Extensions can also be made to address the case where a single investment increases the production rate of multiple products. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004.     

Designing acceptance sampling schemes for life testing with mixed censoring

Mixed censoring is useful extension of Type I and Type II censoring and combines some advantages of both types of censoring. This paper proposes a general Bayesian framework for designing a variable acceptance sampling scheme with mixed censoring. A general loss function which includes the sampling cost, the time‐consuming cost, the salvage value, and the decision loss is employed to determine the Bayes risk and the corresponding optimal sampling plan. An explicit expression of the Bayes risk is derived. The new model can easily be adapted to create life testing models for different distributions. Specifically, two commonly used distributions including the exponential distribution and the Weibull distribution are considered with a special decision loss function. We demonstrate that the proposed model is superior to models with Type I or Type II censoring. Numerical examples are reported to illustrate the effectiveness of the method proposed. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004     

时域分析在雷达动目标识别中的应用

本文通过对地面几类目标运动特性的统计研究,利用线性预测的方法进行目标特征的提取,进而用模式识别的理论对地面目标进行自动识别,取得了良好的识别效果。     

隐蔽锥扫雷达波束的交叉点电平

本文根据隐蔽锥扫雷达天线的工作原理,从方向性函数出发,分析了接收状态下高频馈电网络中,和差信号的幅相特性与隐蔽锥扫波束交叉点电平的关系,从而对不能自动跟踪的隐蔽锥扫雷达,从天馈系统方面分析了原因,并为设计和部队维修提供了理论根据和有效方法。     

传热规律对卡诺热泵有限时间(火用)经济最优性能的影响

本文导出了一种较为普遍的传热规律 q∝△(T~n)时内可逆卡诺热泵的最佳供热系数、利润率关系,并藉此讨论了几种传热规律时内可逆卡诺热泵的有限时间(火用)经济最优性能,得到了一些新的普适结果。     

语音编码系统的客观质量评估

本文比较了几种常见的语音编码系统客观质量评估方法,得出 LPC CD(法线性预测编码倒谱距离法)是一种最接近主观评估结果的客观质量评估方法的结论,并对 LPC CD 法作了详细的介绍。     

关于有限时间热力学的最小熵产生最大值原则

本文力图从能表征状态的热力学参数熵的变化中找到有关有限时间热力学新的分析方法,提出了工作参数选择的最小熵产生最大值原则。这个原则揭示了有限时间热力学以时间为基础的“率”与非平衡热力学熵产生间的内在联系。据此,我们便可得到正、反向内可逆卡诺循环的最佳工作参数。为有限时间热力学的普遍应用研究提供了一新的线索。     

基于PC总线的第三代自动测试系统(ATE)

本文从自动测试系统的发展过程,分析了第三代自动测试系统的结构模式,提出了建立在IBM-PC总线基础上的新型实用结构模式,且利用这种模式,组建并实现了鱼雷自动测试系统。