阵列增益下的最大听觉距离及算例分析

被动声定位技术已成为战场目标定位的重要手段,人-机一体化头盔式"电子哨兵"系统能够解决阵列信号处理低信噪比性能下降及人耳听觉距离有限的缺点。作为系统研发的理论基础,从声传播方程出发,研究了考虑阵列增益条件下的最大听觉距离。基于声传播方程,分析了声传播损失的计算方法,探讨了自由场情况下和存在阵列支撑物情况下阵列常规增益和阵列超增益的算法,最后通过算例对阵列处理提高人耳听音距离进行了说明,为人-机一体化"电子哨兵"系统研发提供了理论依据。     

软件密集型装备项目质量管理研究

软件密集型装备质量是决定战场胜负的关键要素之一,文章分析了软件密集型装备项目质量管理的基本概念和依据标准、探讨了加强软件密集型装备项目质量管理的主要措施,包括采用过程方法建立质量管理体系、建立全面的质量管理文件和记录、实施重点质量控制方法三方面。     

神光-Ⅲ激光装置的总体集成及探索

神光-Ⅲ激光装置是规模相当于一个标准足球场大小的巨型高功率固体激光工程设施,它是我国ICF激光惯性约束聚变研究的关键实验平台,围绕该装置的总体集成工作是解决装置功能系统配置及复杂接口关系的系统工程;文章分析讨论了总体集成工作的实施与探索过程、主要成就及对百万焦耳级驱动器工程的启示等。     

舰载预警直升机机载雷达有效探测距离模型

针对机载雷达最大作用距离这一参数,难以满足舰载预警直升机部署决策需求,建立了舰载预警直升机与目标接近到某一相对距离时,机载预警雷达发现目标的概率分布模型,进而给出了对特定目标满足给定发现概率和建航概率的有效探测距离计算模型,为针对不同目标预警时,舰载预警直升机的阵位配置研究提供了可靠依据。     

舰载预警直升机机载雷达发现概率与建航概率模型研究

针对舰载预警直升机机载雷达的作战需求,基于机载预警雷达单次扫描发现概率模型,从作战使用的角度,建立了机载预警雷达累积发现概率模型和建航概率模型,为机载雷达有效探测距离的确定提供了依据,为舰载预警直升机预警搜索决策的研究奠定了基础。     

Selling to strategic and loss‐averse consumers: Stocking,procurement, and product design policies

Motivated by the presence of loss‐averse decision making behavior in practice, this article considers a supply chain consisting of a firm and strategic consumers who possess an S‐shaped loss‐averse utility function. In the model, consumers decide the purchase timing and the firm chooses the inventory level. We find that the loss‐averse consumers' strategic purchasing behavior is determined by their perceived gain and loss from strategic purchase delay, and the given rationing risk. Thus, the firm that is cognizant of this property tailors its inventory stocking policy based on the consumers' loss‐averse behavior such as their perceived values of gain and loss, and their sensitivity to them. We also demonstrate that the firm's equilibrium inventory stocking policy reflects both the economic logic of the traditional newsvendor inventory model, and the loss‐averse behavior of consumers. The equilibrium order quantity is significantly different from those derived from models that assume that the consumers are risk neutral and homogeneous in their valuations. We show that the firm that ignores strategic consumer's loss‐aversion behavior tends to keep an unnecessarily high inventory level that leads to excessive leftovers. Our numerical experiments further reveal that in some extreme cases the firm that ignores strategic consumer's loss‐aversion behavior generates almost 92% more leftovers than the firm that possesses consumers’ loss‐aversion information and takes it into account when making managerial decisions. To mitigate the consumer's forward‐looking behavior, we propose the adoption of the practice of agile supply chain management, which possesses the following attributes: (i) procuring inventory after observing real‐time demand information, (ii) enhanced design (which maintains the current production mix but improves the product performance to a higher level), and (iii) customized design (which maintains the current performance level but increases the variety of the current production line to meet consumers’ specific demands). We show that such a practice can induce the consumer to make early purchases by increasing their rationing risk, increasing the product value, or diversifying the product line. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 435–453, 2015     

地面目标红外辐射特征测试研究

为研究地面目标红外辐射特征,进行了室内材料测试和外场地面目标测试,分析材料材质、太阳辐射、风速、空气温湿度、自身热源等因素对地面目标红外辐射特征的影响。结果表明:材料材质对红外辐射特征影响显著;冷态时,地面目标红外辐射特征主要受太阳辐射影响,其次是空气温度、材料热容量和风速;热态时,地面目标红外辐射特征主要受工作热源影响,其次是太阳辐射、空气温度、材料热容量和风速。在进行地面目标红外隐身设计时,应考虑太阳辐射、自身热源等因素的影响,并从结构设计和材料使用两方面着手。     

民用飞机运行可靠性研究进展

结合民用飞机运行可靠性研究的技术现状与发展趋势,根据现有的型号设计、研制和在役飞机的具体情况,阐述了民用飞机运行可靠性研究需求。通过梳理民用飞机运行可靠性理论研究进展及工程应用现状,从运行数据采集与处理、运行可靠性分析方法、运行可靠性预测反馈技术、运行可靠性的优化设计、优化维修任务、运行可靠性综合管理平台六个方面,详细阐述民用飞机运行可靠性研究现状及面临问题,展望了民用飞机运行可靠性研究未来发展方向。     

地基不均匀沉降后的某框架结构安全性分析

由于某框架结构在施工过程中发生了明显的不均匀沉降,结构体可能存在安全隐患。为此,对该框架结构进行了现场检测,根据检测结果,应用大型有限元软件ANSYS对地基变形后的结构安全性进行分析,合理评价了结构性能,其工程经验可供参考。     

Single machine parallel batch scheduling subject to precedence constraints

We consider the single machine parallel batch scheduling problems to minimize makespan and total completion time, respectively, under precedence relations. The complexities of these two problems are reported as open in the literature. In this paper, we settle these open questions by showing that both problems are strongly NP‐hard, even when the precedence relations are chains. When the processing times of jobs are directly agreeable or inversely agreeable with the precedence relations, there is an O(n²) time algorithm to minimize the makespan. © 2004 Wiley Periodicals, Inc. Naval Research Logistics, 2004