C2有理插值样条曲线曲面

首先提出一组基函数向量,它具有以下特定的性质：ＢＢ（０）Ｔ＝（０．０,１．０,０．０,０．０）,ＢＢ（１）Ｔ＝（０．０,０．０,１．０,０．０）ＢＢ＇（０）Ｔ＝（－０．５,０．０,０．５,０．０）,ＢＢ＇（１）Ｔ＝（０．０,－０．５,０．０,０．５）ＢＢ″（０）Ｔ＝－（１．０,－２．０,１,０,０．０）,ＢＢ″（１）Ｔ＝（０．０,１．０,－２．０．１．０）。进而研究了以此函数向量的张量积形式定义的有理样条曲面。并得以下结论：（１）插值性;（２）Ｃ２连续性;（３）局部性和可调性。文中还分析了“权”的作用,并指出它与三次Ｂ－样条的类似性。     

时序逻辑的并行描述与隐含遍历

随着电路规模的迅速增长,设计验证越来越复杂,从而需要高速的数据处理系统。基于总线型多机系统环境,研究电路网表和布尔表达式的BDD（Binary Decision Diagram）并行构造方法,并通过隐含遍历任务的动态调度设计有效地完成时序逻辑的状态遍历。     

层裂问题的数值研究

本文对Carrol、Holt 和Johnson提出的延性材料损伤断裂进行了改进。在模型中考虑了材料的硬化效应和空穴成核的影响。用数值方法模拟了高速碰撞中OFCH 铜和铝的层裂过程,其结果与实验吻合得相当好。     

Comparing alternating renewal processes

Sufficient conditions are given for stochastic comparison of two alternating renewal processes based on the concept of uniformization. The result is used to compare component and system performance processes in maintained reliability systems.     

A dual criteria sequencing problem with earliness and tardiness penalties

We consider the problem of sequencing n jobs on a single machine, with each job having a processing time and a common due date. The common due date is assumed to be so large that all jobs can complete by the due date. It is known that there is an O(n log n)‐time algorithm for finding a schedule with minimum total earliness and tardiness. In this article, we consider finding a schedule with dual criteria. The primary goal is to minimize the total earliness and tardiness. The secondary goals are to minimize: (1) the maximum earliness and tardiness; (2) the sum of the maximum of the squares of earliness and tardiness; (3) the sum of the squares of earliness and tardiness. For the first two criteria, we show that the problems are NP‐hard and we give a fully polynomial time approximation scheme for both of them. For the last two criteria, we show that the ratio of the worst schedule versus the best schedule is no more than . © 2002 Wiley Periodicals, Inc. Naval Research Logistics 49: 422–431, 2002; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/nav.10020     

边界扫描测试仪软件系统开发

边界扫描是一种正在被人们普遍接受的可测试性设计技术 ,在电子设备测试和故障诊断中发挥着越来越重要的作用。本文介绍了开发的边界扫描测试仪样机的工作原理 ,并着重论述了其软件开发的几个重要问题。     

舰船可靠性对维修费用的影响分析

对两类主要影响因素分别建立了相应的数学模型．依据约化理论,建立了维修费用的ＶＡＲ模型．同时,根据统计资料分析了实际舰载主要设备的故障规律,指出了传统定时维修方式的理论基础的不完整性．     

Constrained minimax optimization of continuous search efforts for the detection of a stationary target

Analytical resolution of search theory problems, as formalized by B.O. Koopman, may be applied with some model extension to various resource management issues. However, a fundamental prerequisite is the knowledge of the prior target density. Though this assumption has the definite advantage of simplicity, its drawback is clearly that target reactivity is not taken into account. As a preliminary step towards reactive target study stands the problem of resource planning under a min–max game context. This paper is related to Nakai's work about the game planning of resources for the detection of a stationary target. However, this initial problem is extended by adding new and more general constraints, allowing a more realistic modeling of the target and searcher behaviors. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

Production to order and off‐line inspection when the production process is partially observable

This study combines inspection and lot‐sizing decisions. The issue is whether to INSPECT another unit or PRODUCE a new lot. A unit produced is either conforming or defective. Demand need to be satisfied in full, by conforming units only. The production process may switch from a “good” state to a “bad” state, at constant rate. The proportion of conforming units in the good state is higher than in the bad state. The true state is unobservable and can only be inferred from the quality of units inspected. We thus update, after each inspection, the probability that the unit, next candidate for inspection, was produced while the production process was in the good state. That “good‐state‐probability” is the basis for our decision to INSPECT or PRODUCE. We prove that the optimal policy has a simple form: INSPECT only if the good‐state‐probability exceeds a control limit. We provide a methodology to calculate the optimal lot size and the expected costs associated with INSPECT and PRODUCE. Surprisingly, we find that the control limit, as a function of the demand (and other problem parameters) is not necessarily monotone. Also, counter to intuition, it is possible that the optimal action is PRODUCE, after revealing a conforming unit. © 2007 Wiley Periodicals, Inc. Naval Research Logistics, 2007     

论日伪言说下的新四军——对铁军精神的反证式解读

中国共产党领导下的新四军在8年抗战中做出了巨大的牺牲和贡献,日伪虽然对此百般掩饰与歪曲,但在论及新四军的作战地区、新四军的战术与作战、新四军的素质及其与群众的关系时仍透露一些无法掩盖的事实。从某种程度上,这些事实反而成为新四军铁军精神的一种反面证明。