雷达计量保障人员分配最优匹配模型

如何合理地分配保障人员是装备保障工作的重要问题之一,利用辅助决策系统快速生成科学、合理的计量保障人员分配方案,可以有效地提高雷达装备计量保障效能.根据雷达装备计量保障工作的特点,提出了计量保障人员分配的数学模型,给出了效益矩阵的求解方法,并通过算例进行了验证.     

一种陀螺与星敏感器组合定姿算法

提出了一种利用陀螺与星敏感器进行组合定姿的方案.为了避免状态及量测向量选取不当而造成的误差,首先采用四元数法对卫星的姿态进行描述;接着分析了陀螺与星敏感器系统的误差源,选取误差四元数及陀螺的系统误差作为组合系统的状态,获得了系统状态方程;同时采用星敏感器的量测作为系统量测,并利用新的数学变换构得到更为准确的量测方程;最...     

调炮精度检测中双经纬仪优化布站方法

针对“双经纬仪法”检测调炮精度中随机布站使测量系统达不到最佳测量精度的问题,提出了一种优化布站方法.根据火炮调炮范围确定了调炮精度检测中的测量区域,推导出了双经纬仪测量系统对于该测量区域的平均测量不确定度公式.结合某型火炮设计了基于遗传算法的具体优化过程,对测量系统的3个位置参数进行优化,得到最佳测量布局,并通过仿真试...     

基于多源传感器的单星定位算法与精度分析

为解决单星环境下静态载体的单点定位问题,建立基于芯片级原子钟和气压高度计辅助下的单星定位算法.包括对单星连续测距定位算法进行算法推导、误差分析与仿真验证、搭建静态单星定位试验平台,以及利用实测数据验证单星连续测距定位算法的有效性.仿真与实验结果表明:真实接收机经过对一颗卫星的连续观测,辅以高精度芯片级原子钟和气压高度计提供时钟和高度信息,可在2 min内完成500 m精度定位,以及在5 min内完成200 m精度定位,完全符合战时应急定位精度需求.     

无线传感网络中多转发节点协作传输策略

协作通信是提高无线传感网络性能的有效技术.为此,针对能量采集的无线传感网络(EH-WSNs),提出多转发节点协作传输(Multi-relay Cooperative Transmitting,MRCT)方案.MRCT方案采用时隙切换/功率分配机制,优化解码信息和传输信息的功率分配;转发节点将所接收的信息进行放大——转发处理,并由将多个转发节点的信息合并后,再传输传感节点,进而提高吞吐量和安全能力.通过仿真分析了MRCT方案的吞吐量和安全中断概率性能.仿真结果表明,提出的MRCT方案的吞吐量和安全性能得到提升.     

基于动态时间规整下密度聚类的轨迹识别研究

为使地空导弹兵模拟训练系统获得的目标机动轨迹更加贴近实战、更有依据性,考虑对演习训练产生的轨迹数据进行分析,设计了DBSCAN(Density-Based Spatial Clustering of Applications with Noise,针对有噪声数据的基于密度的空间聚类)预分类的DBSCAN改进DTW(Dynamic Time Warping,动态时间归整)聚类算法来分析机动轨迹.并与未预分类的DBSCAN改进DTW聚类算法进行对比,发现其运行效率和分类准确度方面均较优.同时分析了数据结构和算法的参数对分类效果的影响,发现数据规模越大,DBSCAN预分类的DBSCAN改进DTW聚类算法的优势越明显.通过仿真得到了使DBSCAN预分类的DBSCAN改进DTW聚类算法发挥最高效率的参数.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

【专题】智能化导弹质量检测方法研究

导弹是由各种类型装备组成的综合性很强的复杂系统,智能技术的引入进一步丰富了智能导弹质量特性的内涵,对质量检测和控制提出了更高要求,需要开发与之相适应的检测方法。本文先给出了智能导弹的定义和内涵,分析了其智能特性,接着概述了智能化导弹的结构组成,分析了各智能部件的功能和结构组成,从智能化导弹结构组成及测试参数、智能化部件的嵌入式软件作用、零部件机械加工精度等方面提出了智能化导弹质量检测的需求,并在此基础上结合智能化制造等技术提出了在线检测、自动检测/测试、BIT自检、软件测评技术以及弹载遥测的智能化导弹质量检测途径和方法。     

基于信号的自动测试系统软件研究

分析了ATLAS 2K语言和IVI-S ignal Interface标准的系统模型和异同点,结合二者,给出了基于信号的自动测试系统软件设计方法,该方案为通用自动测试系统软件设计提供了技术实现途径。