钛酸酯偶联剂在铜-环氧屏蔽导电涂料中的用量研究

应用化学键理论,在前人提出的理论模型基础上,考察了一种复合单烷氧型钛酸酯偶联剂在铜-环氧屏蔽导电涂料中的最佳用量问题,结果表明理论值和试验值有很大差别,并对此进行了分析。     

基于优化BP神经网络的气象环境下军事通信效能评估

气象条件对作战的各个方面都产生不同程度的影响和制约,恶劣的天气情况会影响军事通信质量,为提高在气象环境影响下的军事通信效能评估效果,将BP(Back Propagation)神经网络模型应用于军事通信效能评估中,并结合基于信息素的细菌觅食改进算法(Bacterial Foraging Optimization base...     

汉语原型句蜕向英语多元逻辑组合的变换

汉语原型句蜕的英译形式多种多样,其中变换成英语的多元逻辑组合是涉及比较复杂变换细节的一种,因而成为颇具特色的语义块构成变换子类.文章从概念阐释入手,详尽分析了这种变换的语言现象、变换的必要性以及实施变换的技术准备.     

新形势下公安边防士官思想政治工作调查与研究

士官制度改革 ,对提高部队整体素质和战斗力 ,圆满完成以边防保卫为中心的各项任务具有重要意义。同时 ,随着士官制度的改革 ,兵员结构的变化 ,士官服役时间的延长 ,年龄增大 ,实际问题增多 ,以及地方人事用工制度的改革 ,特别是现阶段的国际和国内新变化 ,给士官队伍的思想政治建设带来了许多新情况、新问题。通过深入调查 ,分析现象 ,深入了解当前影响和制约士官思想政治建设的问题和矛盾 ,才能找出正确的解决问题的对策     

一种基于离心雾化的新型热喷涂技术

研究开发了一种新型的热喷涂技术——离心雾化转移弧等离子喷涂技术(CAPTAS),阐述了该技术工作原理、设备以及熔融粒子的离心雾化机理。观察了采用该技术所制备的涂层微观组织结构,通过能谱仪对该涂层的成分进行了分析, 并与传统的电弧喷涂涂层进行了比较。结果表明,采用CAPTAS技术制备的涂层具有和传统电弧喷涂涂层类似的扁平化层状结构,但粒子大、变形小、氧化物含量低。     

Fracture mechanism of a cylindrical shell cut by circumferential detonation collision

The failure mechanism of a cylindrical shell cut into fragments by circumferential detonation collision was experimentally and numerically investigated. A self-designed detonation wave regulator was used to control the detonation and cut the shell. It was found that the self-designed regulator controlled the fragment shape. The macrostructure and micro-characteristics of fragments revealed that shear fracture was a prior mechanism, the shell fractured not only at the position of detonation collision, but the crack also penetrated the shell at the first contact position of the Chapmen-Jouguet (C-J) wave. The effects of groove number and outer layer thickness on the fracture behavior were tested by simulations. When the thickness of the outer layer was 5–18 mm, it has little effect on fragmentation of the shell, and shells all fractured at similar positions. The increase of the groove number reduced the fracture possibility of the first contact position of the C-J wave. When the groove number reached 7 with a 10 mm outer layer (1/4 model), the fracture only occurred at the position of detonation collision and the fragment width rebounded.     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

作战构想风险性评估模型

作战构想是制定作战方案、定下作战决心的依据,在任务规划中起着承上启下的作用,意义重大.针对构想风险难以定量分析的难题,基于作战构想的组成要素、战场情况分析研判数据,从周密性、机动、打击、防护等角度构建了作战构想风险性评估指标体系,并提出了对各个指标进行定量分析的评估模型.最后,采用实例对提出的方法进行了验证,结果表明,该方法可行有效,避免了定性分析中存在的主观性、模糊性等不足,为作战构想评估提供了新的思路和方法.     

模块化中频信号源设计

信号源采用小型模块化设计,由多个体积小巧的信号产生模块实现功能.模块使用FPGA控制DAC和PLL实现功能,同时为了进一步缩小体积,模块上的DAC与PLL间采用直连设计.单个模块可独立编程设置,选择输出中频信号或者时钟信号,每台信号源中的模块数量也可根据实际需求灵活选择.该信号源经过验证满足要求,可以为高速电路调试提供良好保障.     

多因素观测来源不确定的多目标跟踪算法

杂波、低检测概率和目标间观测相互干扰等因素,使得目标观测的来源难以辨别,提出一种基于改进GMPHD滤波的多目标跟踪算法,通过引入目标标记和权重向量,增广了标准GMPHD迭代中目标信息.基于高斯分量合并策略、目标状态估计策略和高斯分量优化策略,能够有效地改善目标状态估计精度和滤波迭代效率.目标跟踪仿真实验结果表明了所提算法的有效性及鲁棒性.