一种针对基因识别的GHMM简化算法

广义隐Markov模型是计算机基因识别的一种重要模型,它克服了传统隐Markov模型的状态段长成几何分布的缺陷,更加适合于计算机基因识别。其缺点在于计算量大,需要采用有效的简化算法。利用基因的结构特点,在不附加额外限制条件的情况下,提出了一种新的简化算法,其计算复杂度是序列长度的线性函数。对实际生物序列数据的测试结果表明了此简化算法的有效性。     

直升机工作特性建模与飞行性能仿真

以涡轮轴发动机工作特性建模为中心,对某系列直升机飞行性能进行仿真研究,力争实现对直升机实施"基于状态的维修"。讨论了直升机飞行性能和涡轮轴发动机特性的表述方法,建立了涡轮轴发动机的数学模型,并讨论了其解法与应用。基于发动机台架性能仿真程序对该模型进行简化,得到涡轮轴发动机工作过程的热力学模型。对发动机性能进行计算完成飞行性能仿真,应用结果表明该方法是可信、高效的。     

作战构想风险性评估模型

作战构想是制定作战方案、定下作战决心的依据,在任务规划中起着承上启下的作用,意义重大.针对构想风险难以定量分析的难题,基于作战构想的组成要素、战场情况分析研判数据,从周密性、机动、打击、防护等角度构建了作战构想风险性评估指标体系,并提出了对各个指标进行定量分析的评估模型.最后,采用实例对提出的方法进行了验证,结果表明,该方法可行有效,避免了定性分析中存在的主观性、模糊性等不足,为作战构想评估提供了新的思路和方法.     

模块化中频信号源设计

信号源采用小型模块化设计,由多个体积小巧的信号产生模块实现功能.模块使用FPGA控制DAC和PLL实现功能,同时为了进一步缩小体积,模块上的DAC与PLL间采用直连设计.单个模块可独立编程设置,选择输出中频信号或者时钟信号,每台信号源中的模块数量也可根据实际需求灵活选择.该信号源经过验证满足要求,可以为高速电路调试提供良好保障.     

多因素观测来源不确定的多目标跟踪算法

杂波、低检测概率和目标间观测相互干扰等因素,使得目标观测的来源难以辨别,提出一种基于改进GMPHD滤波的多目标跟踪算法,通过引入目标标记和权重向量,增广了标准GMPHD迭代中目标信息.基于高斯分量合并策略、目标状态估计策略和高斯分量优化策略,能够有效地改善目标状态估计精度和滤波迭代效率.目标跟踪仿真实验结果表明了所提算法的有效性及鲁棒性.     

Shock-induced reaction behaviors of functionally graded reactive material

In this paper, the ballistic impact experiments, including impact test chamber and impact double-spaced plates, were conducted to study the reaction behaviors of a novel functionally graded reactive material (FGRM), which was composed of polytetrafluoroethylene/aluminum (PTFE/Al) and PTFE/Al/bismuth trioxide (Bi₂O₃). The experiments showed that the impact direction of the FGRM had a significant effect on the reaction. With the same impact velocity, when the first impact material was PTFE/Al/Bi₂O₃, compared with first impact material PTFE/Al, the FGRM induced higher overpressure in the test chamber and larger damaged area of double-spaced plates. The theoretical model, which considered the shock wave generation and propagation, the effect of the shock wave on reaction efficiency, and penetration behaviors, was developed to analyze the reaction behaviors of the FGRM. The model predicted first impact material of the FGRM with a higher shock impedance was conducive to the reaction of reactive materials. The conclusion of this study provides significant information about the design and application of reactive materials.     

Fracture mechanism of a cylindrical shell cut by circumferential detonation collision

The failure mechanism of a cylindrical shell cut into fragments by circumferential detonation collision was experimentally and numerically investigated. A self-designed detonation wave regulator was used to control the detonation and cut the shell. It was found that the self-designed regulator controlled the fragment shape. The macrostructure and micro-characteristics of fragments revealed that shear fracture was a prior mechanism, the shell fractured not only at the position of detonation collision, but the crack also penetrated the shell at the first contact position of the Chapmen-Jouguet (C-J) wave. The effects of groove number and outer layer thickness on the fracture behavior were tested by simulations. When the thickness of the outer layer was 5–18 mm, it has little effect on fragmentation of the shell, and shells all fractured at similar positions. The increase of the groove number reduced the fracture possibility of the first contact position of the C-J wave. When the groove number reached 7 with a 10 mm outer layer (1/4 model), the fracture only occurred at the position of detonation collision and the fragment width rebounded.     

基于自适应Kalman滤波算法的航空发动机可测参数及其偏离量估计

针对采用估计可测参数偏离量建立航空发动机机载自适应模型的方案中,可测参数偏离量估计的问题,引入了CA(Constant Acceleration)模型,建立了简化的可测参数状态方程和测量方程,采用自适应Kalman滤波算法直接估计可测参数,由估计出的可测参数与发动机非线性模型计算的额定值之差,获得可测参数偏离量.为解决因简化的状态模型系统误差较大,采用标准Kalman滤波会出现估计严重偏离真值的问题,分析了标准Kalman滤波准则和状态模型误差对滤波结果的影响,采用动态调整状态预报在滤波估计结果中权重的策略,给出了单因子自适应Kalman滤波算法准则及递推公式,使滤波估计准确.对不同的可测参数分别采取序列滤波的方法,减少了运算量.以仿真产生的发动机测量数据为例,对系统模型和所设计的算法进行验证,计算结果表明,所设计的滤波算法具有很快的收敛速度和计算速度,结果优于标准Kalman滤波算法,具有更好的估计精度和一定的工程应用价值.     

复杂适应系统理论与信息化战争研究

战争系统是典型的复杂巨系统之一,对战争系统的研究是系统科学研究的一个重要分支。文章首先研究了复杂适应系统的概念及其7个基本属性,然后从相互作用、战争手段的多样性以及不确定性三个方面对信息化战争复杂性的产生原因进行了探讨,并分析了信息化战争复杂性的三个重要表现形式,即非线性、涌现性和流动性。最后分别从作战理论研究、战争模拟以及战法改进三个方面分析了复杂适应系统理论的应用。     

用 Gd2O3 做介质缓冲层制作金属包覆光波导偏振器

首次报道了采用Ｇｄ２Ｏ３薄膜作介质缓冲层制作金属包覆Ｔｉ：ＬｉＮｂＯ３光波导偏振器。通过对理论模型的计算选取合适的介质缓冲层厚度,给出了理论计算和实验结果。测试结果表明,我们实际制作的Ｇｄ２Ｏ３／Ａｌ包覆Ｔｉ：ＬｉＮｂＯ３偏振器的偏振消光比＞３５ｄＢ。