压水堆运行中ΔT超温度/超功率保护分析

从核电站压水堆动力装置在运行中ΔT超温度 /超功率保护功能出发 ,介绍了压水堆ΔT超温度 /超功率保护系统 ,分析了确定极限限制线以及保护区的方法 ,并对此作出了评价 .     

电力电子技术的现状与绿色变换的发展趋势

论述了电力电子技术的发展及其产生的影响 ,认为绿色变换是消除谐波污染、进一步发展绿色化电力电子技术的唯一途径 ,由此阐明了绿色变换技术的现实意义     

基于模拟退火算法的阵列模型有源校正方法

针对同时存在通道幅度相位不一致与阵列互耦的均匀直线阵列,提出了一种采用模拟退火算法的阵列模型校正方法.该方法使用多个辅助信源分时工作,根据子空间基本原理构造目标函数,采用模拟退火算法对幅相误差矩阵及互耦矩阵进行估计.利用该方法对均匀直线阵进行了计算机仿真与实测实验,仿真及实验结果证明了该方法是有效可行的.     

精确制导武器系统作战效能的LMBP神经网络评估

着眼于武器系统的作战使用,介绍了一种基于LMBP神经网络的精确制导武器系统作战效能综合评估方法.首先,从总体上综合地加以动态权衡,确立了评估的指标体系,其次在阐述BP神经网络相关原理的基础上,对LMBP算法进行了描述,建立了基于该网络的精确制导武器系统作战效能评估模型,最后介绍了该方法的实际应用,并利用MATLAB神经网络工具箱进行仿真,实例证明此方法与其他评估方法相比,基于LMBP神经网络的精确制导武器系统作战效能评估方法具有一定的优越性.     

面向大规模集群的并行I/O用户层配置优化策略

影响应用I/O性能的关键因素主要有三个层次:包括应用的I/O接口实现、体系结构和文件系统组件的性能以及应用的I/O参数配置。从应用I/O配置优化的视角,分析了大规模集群并行I/O的配置调优空间,在此基础上,给出了一套大规模集群并行I/O性能特征测试分析方法。基于该方法,在某国产超级计算集群上开展了一系列I/O测试分析来刻画系统的I/O性能特征,进而指导并行应用程序的I/O配置优化。基于优化后的配置参数,在两类典型的并行I/O场景中,针对某类生产应用程序,8192进程下的重启动数据写操作时间下降了15%,4096核的程序作业加载时间从10 min缩短到了5 s。     

Inventory transshipment game with limited supply: Trap or treat

Inventory transshipment is generally shown to be beneficial to retailers by matching their excess demand with surplus inventory. We investigate an inventory transshipment game with two newsvendor-type retailers under limited total supply and check whether the retailers are better off than the case without transshipment. We derive the ordering strategies for the retailers and show that unlike the unlimited supply case, a pure Nash equilibrium only exists under certain conditions. Furthermore, contrary to the conventional wisdom, we show that inventory transshipment may not always benefit both retailers. Although one of the retailers is guaranteed to be better off, the other could be worse off. The decision criteria are then provided for the retailers to determine if they will benefit from the exercise of inventory transshipment. Numerical study indicates that the carefully chosen transshipment prices play an important role in keeping inventory transshipment beneficial to both retailers. Subsequently, a coordinating mechanism is designed for the retailers to negotiate transshipment prices that maximize the total profit of the two retailers while keeping each of them in a beneficial position.     

Pricing and capacity allocation strategies: Implications for manufacturers with product sharing

Emerging sharing modes, like the consumer-to-consumer (C2C) sharing of Uber and the business-to-consumer (B2C) sharing of GoFun, have considerably affected the retailing markets of traditional manufacturers, who are motivated to consider product sharing when making pricing and capacity decisions, particularly electric car manufacturers with limited capacity. In this paper, we examine the equilibrium pricing for a capacity-constrained manufacturer under various sharing modes and further analyze the impact of capacity constraint on the manufacturer's sharing mode selection as well as equilibrium outcomes. We find that manufacturers with low-cost products prefer B2C sharing while those with high-cost products prefer C2C sharing except when the sharing price is moderate. However, limited capacity motivates manufacturers to enter into the B2C sharing under a relatively low sharing price, and raise the total usage level by sharing high-cost products. We also show that the equilibrium capacity allocated to the sharing market with low-cost products first increases and then decreases. Finally, we find that sharing low-cost products with a high limited capacity leads to a lower retail price under B2C sharing, which creates a win-win situation for both the manufacturer and consumers. However, sharing high-cost products with a low limited capacity creates a win-lose situation for them.     

激光制备高附着性能的铜基类金刚石膜

提升类金刚石(Diamond-Like Carbon, DLC)膜在被保护基底上的附着能力具有明显的实际应用价值。从微观机理上分析了前期设计的Cu基多层DLC膜有效性的原因。在此基础上,研究了DLC/SiC循环层中两者厚度比例对膜层的附着性能、纳米硬度和耐磨性的影响,以优化结构、进一步提升实际应用所需的膜层性能。纳米划痕和压痕测试结果表明:随着DLC层与SiC层厚度比例的增大,多层DLC膜在Cu基上附着性能逐渐降低,但当厚度比小于2.3时,仍接近厚度400 nm的单层DLC膜在Si基上的附着性能;Cu基多层DLC膜的纳米硬度逐渐提高,同时,耐磨性接近纯DLC膜。     

静电放电过程电荷量和能量分析

分别采用四指数表达式拟合的方法和数值计算求解双RLC人体静电放电（ESD）模型的方法得到了符合标准要求的ESD电流波形,计算这两种方法下各自的放电电荷量和放电电阻消耗的能量;测量空气式和接触式两种ESD模式下的放电电流波形,并分别计算放电电荷量和能量情况;通过比较得出,放电电荷量和放电电阻消耗的能量都能够超过放电前的3／4,用数值拟合的电流波形虽能满足四个关键参数的要求,但其它部分电流值偏大。