石英/双酚E型氰酸酯复合材料的制备与性能

采用实验方法研究双酚E型氰酸酯树脂的黏度和固化特性,揭示催化剂对双酚E型氰酸酯树脂固化特性的影响规律;采用树脂传递模塑和真空导入模塑工艺制备石英纤维/双酚E型氰酸酯复合材料,并考察其力学性能。结果表明,双酚E型氰酸酯树脂室温至90℃范围内的黏度小于300 m Pa·s,凝胶时间大于10 h,起始固化温度、固化温度和终止固化温度分别为186±5℃,235±5℃和286±5℃;固化特征温度随着催化剂含量的增加而降低,直至催化剂饱和,其饱和范围为0.02%~0.03%,可使双酚E型氰酸酯树脂体系的固化温度降低约60℃,从而避免爆聚,实现液相法成型其复合材料;真空导入模塑工艺制备的石英纤维/双酚E型氰酸酯复合材料的力学性能明显优于树脂传递模塑制备试样。     

Military support and transnational terrorism

Analysing the relationship between the provision of military support and the probability of becoming the target of a terrorist attack, this paper contributes to the literature on the causes of transnational terrorism. We find that deployment of military troops of country X in country Y increases the probability of a terrorist attack on citizens of country X by a terrorist group located in country Y. Exporting weapons to country Y seems to increase the probability of being attacked by the terrorists of this country Y as well. Deploying materials, however, does not seem to significantly influence the probability of attack. Including lagged values for our military support variables ensures that the causality direction is from military support to terrorist attacks. Moreover, these results indicate that while the effect of military deployment on the probability of attack lasts for more than 1 year, the effect is rather short-lived.     

任职教育中实施模拟演练的研究与实践

模拟演练是突出岗位任职教育特点的手段和方法。对开展模拟演练进行思考,提出应把握的三个问题,并进行思考总结。     

Nonperiodic preventive maintenance for repairable systems

As a complex system with multiple components usually deteriorates with age, preventive maintenance (PM) is often performed to keep the system functioning in a good state to prolong its effective age. In this study, a nonhomogeneous Poisson process with a power law failure intensity is used to describe the deterioration of a repairable system, and the optimal nonperiodic PM schedule can be determined to minimize the expected total cost per unit time. However, since the determination of such optimal PM policies may involve numerous uncertainties, which typically make the analyses difficult to perform because of the scarcity of data, a Bayesian decision model, which utilizes all available information effectively, is also proposed for determining the optimal PM strategies. A numerical example with a real failure data set is used to illustrate the effectiveness of the proposed approach. The results show that the optimal schedules derived by Bayesian approach are relatively more conservative than that for non‐Bayesian approach because of the uncertainty of the intensity function, and if the intensity function are updated using the collected data set, which indicates more severe deterioration than the prior belief, replacing the entire system instead of frequent PM activities before serious deterioration is suggested. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Approximation results for min‐max path cover problems in vehicle routing

This article studies a min‐max path cover problem, which is to determine a set of paths for k capacitated vehicles to service all the customers in a given weighted graph so that the largest path cost is minimized. The problem has wide applications in vehicle routing, especially when the minimization of the latest service completion time is a critical performance measure. We have analyzed four typical variants of this problem, where the vehicles have either unlimited or limited capacities, and they start from either a given depot or any depot of a given depot set. We have developed approximation algorithms for these four variants, which achieve approximation ratios of max{3 ‐ 2/k,2}, 5, max{5 ‐ 2/k,4}, and 7, respectively. We have also analyzed the approximation hardness of these variants by showing that, unless P = NP , it is impossible for them to achieve approximation ratios less than 4/3, 3/2, 3/2, and 2, respectively. We have further extended the techniques and results developed for this problem to other min‐max vehicle routing problems.© 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

机载电静液作动器的建模与仿真

电静液作动器兼有传统液压系统和直接驱动的机电作动系统的优点,已在一些工业液压系统中得到应用.在阐述了电静液作动器总体结构和工作原理的基础上,对其电机和液压部分分别建立非线性模型,并设计了三级闭环PID控制器及运用MATLAB/Simulink软件进行仿真分析.仿真结果表明,电静液作动器具有良好的动态性能,在功率电传的飞控系统中将有广泛的应用前景.     

地面微型网域武器攻击方案

提出了地面微型网域武器的三种攻击方案,并分析了三种攻击方案的优缺点,对地面微型网域武器的三种攻击方案进行了MATLAB仿真分析。在综合考虑各个因素后,得出了一种最佳攻击方案。     

训练模拟器总体设计技术及应用

训练模拟器的研制要求的模拟逼真度高,能完成主要操作训练,同时要结构简单、成本低。由于新型武器系统技术含量较高,操作较为复杂,训练模拟器研制周期较短,顶层设计至关重要。本文从总体的角度论述了训练模拟器的功能、结构、关键技术等设计方面的问题。     

临近空间飞行器的现状及发展趋势

临近空间飞行器具有航空航天飞行器无法比拟的优势,在军事上有着广阔的应用前景。介绍了临近空间及临近空间飞行器的概念和特点,总结了临近空间飞行器的发展现状和趋势。     

国防科研试验项目管理基本问题探究

本文对国防科研试验项目和国防科研试验项目管理的内涵及其特性进行了界定。对国防科研试验项目管理的基本问题,即国防科研试验项目管理的管理范围、寿命期及阶段和管理过程进行了原创性研究,并以国防科研试验事例,例证了国防科研试验项目管理寿命期及其阶段划分依据,国防科研试验项目管理过程中的工作流程。