59D坦克火控系统的校准操作研究

通过分析坦克射击准备误差诸因素的地位变化情况,得出火控系统校准误差是影响首发命中的关键因素.在此基础上,重点研究了59D坦克火控系统的校准操作程序和方法,所得结论对部队科技练兵具有一定的指导意义.     

系泊系统动力学特性的研究进展

综述了系泊系统动力学特性的研究现状和方法 ,讨论了所存在的问题及发展趋势 .     

12.7mm高射机枪模态试验与分析

本文利用实验模态分析技术和有限元法研究机枪—土壤系统的动态特性,通过模态试验获得机枪在硬质土壤支撑条件下的低阶模态信息,据此对机枪有限元模型的边界条件进行模拟,并从动力学角度分析影响射击精度的主要因素,为进一步研究机枪结构动力修改和质量评估提供依据,     

Study on energy release characteristics of reactive material casings under explosive loading

Reactive Materials (RMs), a new material with structural and energy release characteristics under shock-induced chemical reactions, are promising in extensive applications in national defense and military fields. They can increase the lethality of warheads due to their dual functionality. This paper focuses on the energy release characteristics of RM casings prepared by alloy melting and casting process under explosive loading. Explosion experiments of RM and conventional 2A12 aluminum alloy casings were conducted in free field to capture the explosive fireballs, temperature distribution, peak overpressure of the air shock wave and the fracture morphology of fragments of reactive material (RM) warhead casings by using high-speed camera, infrared thermal imager temperature and peak overpressure testing and scanning electron microscope. Results showed that an increase of both the fireball temperature and air shock wave were observed in all RM casings compared to conventional 2A12 aluminum ally casings. The RM casings can improve the peak overpressure of the air shock wave under explosion loading, though the results are different with different charge ratios. According to the energy release characteristics of the RM, increasing the thickness of RM casings will increase the peak overpressure of the near-field air shock wave, while reducing the thickness will increase the peak overpressure of the far-field air shock wave.     

地面微型网域武器攻击方案

提出了地面微型网域武器的三种攻击方案,并分析了三种攻击方案的优缺点,对地面微型网域武器的三种攻击方案进行了MATLAB仿真分析。在综合考虑各个因素后,得出了一种最佳攻击方案。     

An engagement model to optimize defense against a multiple attack assuming perfect kill assessment

We present an air-defense engagement model to counter an attack by multiple antiship missiles, assuming perfect kill assessment. In this model, the probability of shooting down all incoming missiles is maximized. A generating function is employed to produce an algorithm which is used to evaluate the outcomes. © 1997 John Wiley & Sons, Inc. Naval Research Logistics 44: 687–697, 1997     

Storage life prediction under pre-strained thermally-accelerated aging of HTPB coating using the change of crosslinking density

In order to predict the storage life of a certain type of HTPB (hydroyl-terminated polybutadiene) coating at 25 C and analyze the influence of pre-strain on the storage life, the accelerated aging tests of HTPB coating at 40 C, 50 C, 60 C, 70 C with the pre-strain of 0%, 3%, 6%, 9%, respectively were carried out. The variation regularity of the change of crosslinking density was analyzed and the aging model of HTPB coating under pre-strained thermally-accelerated aging was proposed. The storage life of HTPB coating at 25 C was estimated by using the Berthelot equation as the end point of the aging life with a 30% decrease in maximum elongation. The results showed that the change of crosslinking density of HTPB coating increased with the increase of aging temperature and aging time, and decreased with the in-crease of pre-strain. Under 0% pre-strain, the relationship between the change of crosslinking density of HTPB coating and the aging time can be described by the logarithmic model with the confidence probability greater than 99%.The stress relaxation phenomenon existed under 3%, 6% and 9% pre-strained aging. The aging model considering chemical aging and pre-strain was established with the confidence probability greater than 90%. The storage life of HTPB coating was 15.2935 years at 25 C under 0% pre-strain, which was reduced by 13.9007%, 75.6949% and 89.7859% under 3%, 6% and 9% pre-strain, respectively. The existence of pre-strain has a serious impact on the storage life of HTPB coating, therefore, the pre-strain should be avoided as much as possible during the actual storage.     

新型弹簧钢 33SiMnB 的研制

本文报导了一种新研制的钢种33SiMnB,用这一碳含量远低于传统弹簧钢(如60Si_2Mn)的新弹簧钢33SiMnB制造的载重汽车板簧、铁路轨枕弹条等弹性制件,不但综合力学性能优于传统弹簧钢制成的相同制件,而且在冶金厂的钢材生产过程和机械厂的制簧生产过程中都显出成品率高、能耗率低等诸多优点。     

高强度热处理双相钢制绳线材研制

本文通过实验提出了一种双相钢制绳线材的热处理工艺程序,即:奥氏体化及水淬以获得全部马氏体组织→临界间加热淬火以获双相组织并回火→酸洗磷化后多道次连续冷拔至终尺寸→人工时效。按此程序生产的线材σ_b 可达1800MPa 以上,且扭转、弯曲疲劳性能超过标准规定值。     

创新人才军民融合培养体系及其构建

创新人才军民融合培养构成人才强国战略、创新驱动发展战略和军民融合发展战略的交汇点。创新人才是战略资源,军民融合为创新人才培养提供了一条全新路径。作为一项系统工程,创新人才军民融合培养包括创新人才军民融合培养主体系统、创新人才军民融合培养客体系统、创新人才军民融合培养方案系统、创新人才军民融合培养资源系统、创新人才军民融合培养制度系统、创新人才军民融合培养考评系统,在系统构建过程中需加大统筹协调、投入保障、政策倾斜、法治保障、合理使用力度,注重体系推进。