Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

Blast resistance evaluation of urban utility tunnel reinforced with BFRP bars

To improve corrosion-resistance of shallow-buried concrete urban utility tunnels(UUTs),basalt fiber reinforced polymer(BFRP)bars are applied to reinforce UUTs.As the UUT must have excellent survival capability under accidental explosions,a shallow-buried BFRP bars reinforced UUT(BBRU)was designed and constructed.Repetitive blast experiments were carried out on this BBRU.Dynamic responses,damage evolutions and failure styles of the BBRU under repetitive explosions were revealed.The tunnel roof is the most vulnerable component and longitudinal cracks develop along the tunnel.When the scaled distance is larger than 1.10 m/kg1/3,no cracks are observed in the experiments.When the BBRU is severely damaged,there are five cracks forming and developing along the roof.The roof is simplified as a clamped-supported one-way slab,proved by the observation that the maximum strain of the transverse bar is much larger than that of the longitudinal bar.Dynamic responses of the roof slab are predicted by dynamic Euler beam theory,which can consistently predict the roof displacement under large-scaled-distance explosion.Compared with the UUT reinforced with steel bars,the BBRU has advantages in blast resistance with smaller deflections and more evenly-distributed cracks when the scaled distance is smaller than 1.260 m/kg1/3 and the steel bars enter plastic state.Longer elastic defamation of the BFRP bars endows the UUT more excellent blast resistance under small-scaled-distance explosions.     

A novel launch dynamics measurement system for multiple launch rocket system and comparative analysis with numerical simulations

In this paper,a novel launch dynamics measurement system based on the photoelectric sensor pair is built.The actual muzzle time(i.e.a time duration that originates from the initial movement to the rocket's departure from the muzzle)and the muzzle velocity are measured.Compared with the classical methods,the actual muzzle time is obtained by eliminating the ignition delay.The comparative analysis method is proposed with numerical simulations established by the transfer matrix method for multibody systems.The experiment results indicate that the proposed measurement system can effectively measure the actual muzzle time and reduce the error of classical methods,which match well with the simulation results showing the launch dynamics model is reliable and helpful for further analysis and design of the MLRS.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.     

基于超网络的近距空中支援信息流转模式构建

稳健灵活的信息流转模式是近距空中支援顺利实施的重要保障.针对近距空中支援信息流转模式构建问题,建立基于超网络的作战信息流转"两层四网"模型.根据作战经验,分析近距空中支援作战的主要作战力量及基本流程,抽象出相应的作战节点和信息关系,以此建立近距空中支援作战信息流转超网络模型.针对超网络节点的超度分布、网络弹性等特性进行仿真实验.仿真结果表明,当前近距空中支援超网络具有一定的合理性和稳定性,同时为下一步优化作战网络结构提供了参考.     

WSNs中基于鸡群优化算法选择簇头的簇路由

能量是无线传感网络(Wireless Sensor Networks,WSNs)的重要资源.有效地利用节点能量可延长网络寿命.簇技术是提高资源分配、缓解网络能耗的有效策略.提出基于鸡群优化算法选择簇头的簇路由(Chicken Swarm Optimization-based Cluster Head Selecting Clustering Routing,CSO-CHS).CSO-CHS路由先从能量角度构建目标函数,再利用鸡群优化算法产生最优鸡群,进而形成最优的簇.通过最优的簇,平衡节点间能耗,进而实现延长网络寿命的目的 .仿真结果表明,相比于同类算法,CSO-CHS路由缓解了节点能耗速度,延长了网络寿命.     

Disruption management in production planning

We study the problem of recovering a production plan after a disruption, where the disruption may be caused by incidents such as power failure, market change, machine breakdown, supply shortage, worker no‐show, and others. The new recovery plan we seek after has to not only suit the changed environment brought about by the disruption, but also be close to the initial plan so as not to cause too much customer unsatisfaction or inconvenience for current‐stage and downstream operations. For the general‐cost case, we propose a dynamic programming method for the problem. For the convex‐cost case, a general problem which involves both cost and demand disruptions can be solved by considering the cost disruption first and then the demand disruption. We find that a pure demand disruption is easy to handle; and for a pure cost disruption, we propose a greedy method which is provably efficient. Our computational studies also reveal insights that will be helpful to managing disruptions in production planning. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005.     

A concave‐cost production planning problem with remanufacturing options

We focus on the concave‐cost version of a production planning problem where a manufacturer can meet demand by either producing new items or by remanufacturing used items. Unprocessed used items are disposed. We show the NP‐hardness of the problem even when all the costs are stationary. Utilizing the special structure of the extreme‐point optimal solutions for the minimum concave‐cost problem with a network flow type feasible region, we develop a polynomial‐time heuristic for the problem. Our computational study indicates that the heuristic is a very efficient way to solve the problem as far as solution speed and quality are concerned. © 2005 Wiley Periodicals, Inc. Naval Research Logistics, 2005     

磁浮系统模型中用弹簧阻尼器替代控制器的等效性分析

在磁浮列车系统研究领域中,为简化计算许多文献将悬浮控制器等效为弹簧阻尼器。而对该方法的有效性,及其结果的可信度都没有做出进一步的分析。从数学模型上分析了弹簧阻尼器系统与控制系统的本质区别,并从稳定性、动态响应特征以及高频激励响应三个方面讨论了这种区别对系统性能的影响。以国防科大磁悬浮列车为被控对象进行了仿真分析,验证了两者之间的差异,说明弹簧阻尼器与控制器是不等效的。     

小口径火炮侵彻钢靶模拟实验研究及有限元分析

对小口径火炮侵彻钢靶问题,分别进行了实验和有限元分析,并将所得结果进行了比较;分析了小口径火炮侵彻钢靶的侵彻过程,得到了带空腔弹丸高速垂直侵彻钢板的典型破坏模式.