计算机辅助装配公差分析的探讨

探讨了将公差分析纳入到设计过程中,并对设计过程中公差取值进行指导的可行性,在用Pro/E在计算机上进行产品预装配的过程中利用公差分析中的最坏情况分析法、统计分析法、敏感分析法、百分比贡献分析法以及Pro/E软件中的CE/TOL(公差分析)模块对所设计的零件和零件装配的全过程进行公差分析与综合,确定零件的公差在装配过程中影响关键尺寸公差的约束及其敏感度,通过改变个别零件的关键尺寸的公差约束来降低制造成本,减少发生干涉和精度超标的概率,提高装配精度。     

兰切斯特方程在水雷战模型中的应用与分析

根据对抗模拟的特点,以兰切斯特方程为基础建立了水雷战的解析数学模型,并进行了仿真,得到了被封锁方的兵力组合优化曲线,以定量分析的方法阐明了该模型在战役全局和战术局部上对水雷战对抗双方的指导意义。     

定向攻击水雷打击概率模型研究

根据定向攻击锚雷的工作原理,建立了其对水面目标打击概率的仿真数学模型,可用于定向区域攻击锚雷打击概率的蒙特卡洛法仿真.     

耦合杀伤区射击次数与舰艇间距分析

研究了舰艇编队协同防空中满足一阶耦合杀伤区对来袭目标射击次数要求的编队舰舰间距配置问题。依据耦合杀伤区的概念,运用几何三角关系和解析法分析了一阶和二阶耦合杀伤区的纵深计算方法。并对给定杀伤区纵深的单舰和协同舰射击次数进行了研究,给出了射击次数模型及受目标投弹圈影响的耦合杀伤区纵深约束条件。对不同入射舷角的目标、不同速度的导弹类目标和不同高度、速度的飞机类目标3种情况下的射击次数与间距关系进行了仿真,得到了一些有益的结论,对编队近程防空队形的间距配置具有指导意义。     

基于四阶累积量的双基地MIMO雷达收发角度估计

提出了一种基于四阶累积量的双基地MIMO雷达收发角度估计算法。在接收端,通过分别构造单阵元和双阵元的四阶累积量矩阵,采用基于四阶累积量的MUSIC算法和ESPRIT算法分别估计出目标的离开方向(DOD)和波达方向(DOA),并且DOD和DOA自动配对。该算法将二维参数的估计问题转化为两个一维形式,不需要二维谱峰搜索,在保证二维方位角估计性能的基础上,降低了运算量。利用四阶累积量有效地扩展了阵列孔径,并且适用于任意加性高斯噪声环境。仿真结果验证了算法的有效性。     

异类传感器信息融合的分布式滤波算法

基于联邦滤波算法,对雷达/红外双模导引头数据融合算法进行了研究,给出了基于雷达/红外双模导引头跟踪系统的结构及算法模型.针对典型工作状况参数,对匀速、匀加速、机动等目标运动状态进行了蒙特卡罗追踪仿真.仿真结果表明:基于联邦滤波的分布式融合跟踪算法,对各种目标运动状态下的位置、速度跟踪精度和抗干扰能力都相对于雷达单模跟踪的较好.     

进气口位置和进气体积流量对油罐油气惰化置换效率的影响

采用机械通风方式对油罐油气进行处理,具有安全性差、通风时间长和效率低下的缺点;利用燃惰气对油罐油气进行处理,可较好地克服上述缺点。在前期研究的基础上,设计模拟实验台架,以燃惰气为介质,实验研究进气口位置和进气体积流量对燃惰气惰化置换油罐油气的影响。     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

The effect of al particle size on thermal decomposition,mechanical strength and sensitivity of Al/ZrH2/PTFE composite

To study the thermal decomposition of Al/ZrH2/PTFE with different Al particle size as well as mechanical strength and impact sensitivity under medium and low strain rates, molding-vacuum sintering was adopted to prepare four groups of power materials and cylindrical specimens with different Al particle size. The active decomposition temperature of ZrH2 was obtained by TG-DSC, and the quasi-static me-chanics/reaction characteristics as well as the impact sensitivity of the specimen were studied respec-tively by quasi-static compression and drop-hammer test. The results show that the yield strength of the material decreased with the increase of the Al particle size, while the compressive strength, failure strain and toughness increased first and then decreased, which reached the maximum values of 116.61 MPa, 191％, and 119.9 MJ/m respectively when the Al particle size is 12—14μm because of particle size grading. The specimens with the highest strength and toughness formed circumferential open cracks and reacted partly when pressed. Those with developmental cracks formed inside did not react. It is considered that fracture of specimens first triggered initial reaction between Al and PTFE to release an amount of heat. Then ZrH2 was activated and decomposed, and participated in subsequent reaction to generate ZrC. The impact sensitivity of the specimens decreased with the increase of Al particle size.     

Pressure relief of underground ammunition storage under missile accidental ignition

Safety of underground ammunition storage is an important issue, especially during the accidental ignition of missiles. This work investigates the pressure and temperature distribution of the multi-layer underground ammunition storage with a pressure relief duct during the accidental ignition process of the missile. A large-scale experiment was carried out using a multi-layered restricted space with a pressure relief duct to simulate the underground ammunition store and a solid rocket motor to simulate the accidental ignition of the missile. The results show that when the motor gas mass flow increased by 5.6 times, the maximum pressure of the ammunition storage increased by 5.87 times. At a certain motor flow rate, when the pressure relief exhaust area at the end of the relief duct was reduced by 1/2, the maximum pressure on the first layer did not change. But the rate of pressure relief was reduced and the time delayed for the pressure of ammunition store to drop to zero. In this experiment, when the motor ignition position was located in to the third layer ammunition chamber, the maximum pressure was reduced by 32.9％ and also reduced the rate of change of pressure. In addition, for the experimental conditions, the theoretical analysis of the pressure relief of the ammunition storage is given by a simplified model. Based on the findings, some suggestions to the safety protection design of ammunition store are proposed.