一种利用GPS载波相位姿态测量的方法

GPS初始整周模糊度的求解是利用载波相位进行测量时的关键问题.采用了对系数矩阵进行QR分解的方法,用以降低矩阵的维数.模糊度搜索时,针对Z变换可能会引入多余误差,采用了对称三角分解法对协方差矩阵进行去相关处理.实验与仿真结果表明,定位误差在0.5 cm以内,方位角和仰角误差在0.1°以内.     

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane (CL-20) as the main explosive.Then the explosive ink direct writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still ε type.The CL-20 based W-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kJ/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,which is about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm3.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

论我军战略理论的创新境界

改革开放以来,我军战略理论的创新境界从立足生存到谋求发展,从"以敌为敌"到"以敌为师",从面对现实到系统前瞻,从突出对抗到追求超越,不断跃升。抓住战略机遇期,使我们摆脱倾力临战的生存型国防,建设长久巩固的发展型国防。以对世界军事形势的前瞻性预测为依据,我军实行军队建设指导思想的战略性转变。虽然几经调整变迁,我军战略理论的发展始终凝聚着"合理内核"。我军战略理论的创新境界,体现着中国特色的当代马克思主义认识论原则。     

基于波束域MUSIC方法的高分辨方位估计

现代声纳系统普遍采用水听器基阵和一定的信号处理来提高对目标的检测和定位能力,而基阵的波束形成则在其中起着核心作用。文中研究了窄带波束域高分辨方位估计技术,分析了波束域MUSIC方位估计的构造过程和具体实现方法。仿真计算表明,基于波束域MUSIC的方位估计算法是一种分辨空间小角域内多个目标的有效方法。     

最小自由能法计算烟火药剂热值

烟火药剂的热值计算在烟火研究领域有着重要的作用．本文根据最小自由能原理,通过一系列基本假设计算出了体系燃烧爆炸反应后的热值,计算结果与实验衡量数据相吻合,并且程序可通过进一步完善,扩展应用于非理想气体,提高计算精度．     

基于RWG基函数的电场积分方程的奇异性处理

采用矩量法分析导体三维散射体时,基于RWG基函数的电场积分方程存在奇异性,如果直接使用数值积分,则准确性很低。为了得到准确的积分结果,将被积函数拆分为2部分,对于无奇异点的部分直接使用数值积分求解,而对于包含奇异点的部分通过积分变换简化被积函数,得到解析表达式,计算实例验证了这种方法的正确性。     

SPH并行计算方案及其在自由表面流动模拟中的应用

针对光滑粒子动力学主要计算量是近邻粒子搜索这一特点,提出了一种基于粒子分解的光滑粒子动力学并行计算方案。利用该方案可以方便地将任意串行光滑粒子动力学代码并行计算,而且每一个时间步内的信息传递量只和粒子总数有关,而和粒子的分布无关,因而特别适合于自由表面流动等大变形问题的并行数值模拟。对一个粒子总数为40万的三维溃坝问题的模拟结果表明:此方案能达到的最大加速比约为16,这一结果可能比空间分解方案(不考虑动态负载均衡)更优。