财务舞弊的类型特点及其防范对策

财务舞弊,是指财务人员为了单位利益或个人目的,通过有目的、有预谋的造假和欺诈行为,故意篡改、伪造、隐匿、销毁有关的会计资料,而造成报出信息与实际信息不符的现象.分析了财务舞弊形成的类型及特点,为事业单位如何防范提出了建议.     

新疆兵团地区小学科学课教师队伍建设及授课现状的调查分析——以石河子市为例

义务教育阶段新课程体系全面进入试验阶段,新课程理念对小学科学教与学提出了更高的要求。为了更好的了解小学科学课的实施现状,本研究以新疆石河子市为例,采用问卷调查、访谈和课堂观察等方法对对石河子市小学科学教师的师资队伍现状进行了调查。调查结果显示：石河子市小学科学师资匮乏;小学科学教师的专业背景较差;青年教师居多;授课能力较低;科学教师参加教研培训活动的次数少,质量低;学校对该课程重视度不高。针对这一现状提出了相应的改革建议。     

量子雷达的技术体制

当前,量子信息理论正在蓬勃发展,其应用已经深入到自然科学的各个领域.量子雷达是量子信息技术在目标探测上的具体应用,可探测隐身目标,具有超强的隐蔽性和机动性.主要介绍了量子雷达的分类、原理、系统组成、特点和关键技术问题.     

Performances and direct writing of CL-20 based ultraviolet curing explosive ink

A new type of explosive ink formulation that can be quickly cured was prepared with unsaturated polyester as binder,styrene as active monomer,2,4,6-trimethylbenzoyl-diphenylphosphine oxide as photoinitiator,and hexanitrohexaazaisowurtzitane (CL-20) as the main explosive.Then the explosive ink direct writing technology was used to charge the micro-sized energetic devices,the curing mechanism of the explosive ink was discussed,and the microstructure,safety performance and explosive transfer performance of the explosive ink molded samples were tested and analyzed.Results indicate that the composite material has a fast curing molding speed,its hardness can reach 2H within 8 min.The crystal form of CL-20 in the molded sample is still ε type.The CL-20 based W-curing explosive ink formulation has good compatibility,its apparent activation energy is increased by about 3.5 kJ/mol.The composite presents a significant reduction in impact sensitivity and its characteristic drop height can reach 39.8 cm,which is about 3 times higher than the raw material.When the line width of charge is 1.0 mm,the critical thickness of the explosion can reach 0.015 mm,and the explosion velocity is 7129 m/s when the charge density is 1.612 g/cm3.     

Numerical investigation of the failure mechanism of cubic concrete specimens in SHPB tests

Cylindrical specimens are commonly used in Split Hopkinson pressure bar (SHPB) tests to study the uniaxial dynamic properties of concrete-like materials.In recent years,true tri-axial SHPB equipment has also been developed or is under development to investigate the material dynamic properties under tri-axial impact loads.For such tests,cubic specimens are needed.It is well understood that static material strength obtained from cylinder and cube specimens are different.Conversion factors are obtained and adopted in some guidelines to convert the material strength obtained from the two types of specimens.Previous uniaxial impact tests have also demonstrated that the failure mode and the strain rate effect of cubic specimens are very different from that of cylindrical ones.However,the mechanical background of these findings is unclear.As an extension of the previous laboratory study,this study performs numerical SHPB tests of cubic and cylindrical concrete specimens subjected to uniaxial impact load with the validated numerical model.The stress states of cubic specimens in relation to its failure mode under different strain rates is analyzed and compared with cylindrical specimens.The detailed analyses of the numerical simulation results show that the lateral inertial confinement of the cylindrical specimen is higher than that of the cubic specimen under the same strain rates.For cubic specimen,the corners are more severely damaged because of the lower lateral confinement and the occurrence of the tensile radial stress which is not observed in cylindrical specimens.These results explain why the dynamic material strengths obtained from the two types of specimens are different and are strain rate dependent.Based on the simulation results,an empirical formula of conversion factor as a function of strain rate is proposed,which supplements the traditional conversion factor for quasi-static material strength.It can be used for transforming the dynamic compressive strength from cylinders to cubes obtained from impact tests at different strain rates.     

基于Agent的坦克连CGF系统智能机动模型研究

分析了面向Agent的CGF设计方案,以坦克连为研究对象,设计了坦克连仿真系统体系结构,并就坦克连在虚拟环境中实现智能机动的行为进行了探讨,介绍了坦克连机动Agent的设计与实现.     

机枪机器人的扫射方式和扫射角速度的研究

机枪机器人将在无人化战争中起到一定作用。使用者可以遥控射击,利用监视屏瞄准目标。由于图像传输延迟,监视屏上显示的图像反映目标在100 ms~300 ms之前的实际位置。射击移动目标是,如不考虑这一因素,将导致命中率降低。推导机枪机器人的扫射角速度计算式,对各种扫射方式进行分析和对比,以美制M240机枪为例进行仿真,进而找到了机枪机器人在平坦开阔地带的最优扫射方式。本方法可作为使用和设计机枪机器人的依据。     

海军陆战队登陆作战仿真实验指标设计

仿真实验是重要的作战研究方法。在论述海军陆战队登陆作战仿真实验概念及其过程的基础上,根据海军陆战队登陆作战仿真实验指标体系的构成,设计作战任务级、行动效果级和作战实体级三级指标,为海军陆战队登陆作战仿真实验的指标设计及实践提供参考。     

噪声统计的Bayes 极大验后估计与系统自适滤波

对于具有测量的线性离散系统,在系统动力学噪声与测量统计特性未知的情况下,本文推导出了噪声统计特性在具有正态－逆Ｗｉｓｈａｒｔ分布验前信息情况之下的Ｂａｙｅｓ极大验后（ＭＡＰ）估计及其实时迫近,从而获得了系统的自适应滤波     

信号特征对分形维数的影响

分形维数是描述信号的一种有效方式,用来作为各种情况下信号复杂度的测量方法。但是对于此种分析的合理解释没有被给出。为了研究信号参数对分形维数的影响,通过对接受信号进行预处理,分别使用盒维数和信息维数进行维数估计,讨论信号采样点数、噪声功率、载频、码率对信号分形维数的影响。仿真结果表明:当采样频率一定时,分形维数在一定范围内对噪声不敏感;码率对盒维数的影响较小,对信息维数的影响较大;载频对信息维数的影响较小,对盒维数的影响较大。