大深度无动力运载器弹道散布影响因素分析

潜射导弹无动力运载器弹道散布特性是导弹后续弹道和运载器分离体水下散布的重要影响因素,决定其散布的主要因素有初始弹道参数和海洋环境扰动等.建立了运载器空间运动数学模型,利用数理统计中的正交试验法安排实验,对不同工况下运载器上浮弹道进行仿真,通过极差分析确定影响因素的主次关系,利用方差分析法和F检验确定影响因素的显著性.仿真结果表明:横向海流对弹道散布半径影响显著,绕x和y轴的初始角速度及横向海流对位移影响不显著.研究结果可以为弹道规划和运载器加工制造提供一定参考.     

基于二阶锥规划的MIMO雷达任意形状旁瓣波束设计

针对MIMO雷达非均匀布阵引起的高旁瓣问题,提出一种基于二阶锥规划的任意形状旁瓣设计算法.算法通过在旁瓣区域附加多个二次不等式约束,从而有效抑制干扰、保持期望方向天线增益的同时,获得了期望的、可以任意控制的旁瓣波束响应.通过将优化模型转化为凸二阶锥规划问题,利用内点法可以得到有效求解.仿真试验表明:算法能够获得任意形状期望旁瓣波束设计的同时,有效提高了波束形成器的输出信干燥比.最后计算机仿真结果证实了算法的有效性和可行性.     

基于Ansofl的PMLS发电机纵向边端效应仿真

永磁直线同步发电机特殊的结构使其存在一种特殊现象——纵向边端效应,从而严重影响了永磁直线同步发电机的性能。利用有限元电磁场分析软件Ansoft建立了永磁直线同步发电机的二维模型,分析了纵向边端效应产生的原因,以及纵向边端效应对永磁直线同步发电机初级磁场的影响。利用磁阻相等的原理,通过增加发电机端部齿宽度和极数两种方法来改善永磁直线发电机性能。经Ansoft软件仿真,结果表明增加端部齿宽度和极数可以有效抑制纵向边端效应,提高永磁直线同步发电机的性能。     

Inventory financing under Risk-Adjusted-Return-On-Capital criterion

Risk-Adjusted-Return-On-Capital (RAROC) is a loan-pricing criterion under which a bank sets the loan term such that a certain rate of return is achieved on the regulatory capital required by the Basel regulation. Some banks calculate the amount of regulatory capital for each loan under the standardized approach (“standardized banks,” the regulatory capital is proportional to the loan amount), and others under the internal rating-based (IRB) approach (“IRB banks,” the regulatory capital is related to the Value-at-Risk of the loan). This article examines the impact of the RAROC criterion on the bank's loan-pricing decision and the retailer's inventory decision. We find that among the loan terms that satisfy the bank's RAROC criterion, the one that benefits the retailer the most requires the bank to specify an inventory advance rate in addition to the interest rate. Under this loan term, the retailer's inventory level is more sensitive to his asset level when facing an IRB bank compared to a standardized bank. An IRB (standardized) loan leads to higher profit and inventory level for retailers with high (low) asset. For retailers with medium asset, an IRB loan results in a higher retailer profit but a lower consumer welfare. Calibrated numerical study reveals that the benefit of choosing standardized banks (relative to IRB banks) can be as high as 30% for industries with severe capital constraints, volatile demands, and low profit margins, highlighting the importance for retailers to carefully choose the type of banks to borrow from. When the interest rate is capped by regulation, retailers borrowing from a standardized bank are more likely to be influenced by the interest rate cap than those borrowing from an IRB bank. Under strong empire-building incentives (the bank will offer loan terms to maximize the size of the loan), retailers with medium initial asset level shift their preference from IRB banks to standardized banks.     

基于虚拟现实技术的手榴弹投掷安全施训研究

分析了目前手榴弹投掷训练存在的一些问题和研究方法,模拟仿真了基于虚拟现实技术、N-vision平台、3dsMax以及JACK建立的手榴弹实弹投掷场景,再现优秀训练者的技术动作和细微环节、教练员的意图,采用交互漫游,增强了沉浸感,从而提高训练质量,降低安全隐患风险。     

排液槽对折板捕雾器性能影响数值模拟

为研究气液分离器内使用的折板式捕雾器的流场特性及排液槽对其性能的影响,利用流体动力学计算软件Fluent,采用Low-Re Stress-Omega模型和DPM两相流模型,对捕雾器气液两相流流场进行了数值模拟。通过对比安装排液槽前后捕雾器内流场,分析了排液槽对捕雾器流场速度、液滴运动轨迹的影响;发现排液槽能大幅提高捕雾器的除雾效率,10μm以上液滴基本能够全部去除,但是也会使除雾器压降急剧增大。最后研究了排液槽主要结构参数——折弯直径和长度对捕雾器性能的影响,发现增大排液槽折弯直径和长度均能增加除雾效率,但同时也会增大进出口压降。     

交流杂散电流对埋地钢质管道腐蚀危害实验

为探究交流杂散电流的影响因素及其对阴极保护系统的影响,搭建交流干扰腐蚀实验平台研究了土壤电阻率、干扰电压大小、涂层电阻率和通断时间比对交流杂散电流密度的影响;采用腐蚀试片失重法研究了交流杂散电流密度对腐蚀速率的影响以及阴极保护电位分别为-850 mV和-1 000 mV时对阴极保护系统的影响。实验结果表明:土壤电阻率、干扰电压大小、涂层电阻率和通断时间比对交流杂散电流密度具有较为显著的影响;阴极保护电位为-1 000 mV时,即使交流电流密度为20 mA/cm2,腐蚀试片也能得到有效保护。因此,埋地管道应采用绝缘性能好的防腐涂层,规划合理的铺设路线,并在运行过程中采取强制电流阴极保护系统,设置合理的阴极保护电位。     

分布式态势感知一致性分析与度量方法研究

一致的态势感知,是现代武器、火力系统以及部队紧耦合协同作战的基础。本文以分布式态势感知理论为依据,从系统的角度,构建了团队达成一致态势感知过程的动力学模型;以系统内部一致性、外部一致性和一致所需最短时间为指标,给出了团队态势感知一致性的度量方法。仿真结果表明,适当地提高团队内沟通的广泛度和相互作用强度,选择合适的沟通网络,对提高一致性能力有积极的作用。     

合作定位节点选择策略

合作定位是指接收机之间通过合作网络交换关键定位信息实现协同定位的新技术,接收机进行合作定位过程中可供使用的辅助节点包括可视卫星和已定位邻居接收机。接收机之间的合作增加定位过程中的可用辅助节点数量,进而增加位置估计的计算量和计算时间,在可用辅助节点较多时,定位实时性很难得到保证。提出改进次优节点选择算法,计算备选节点之间单位向量差作为节点价值,选择拥有最大价值的节点作为辅助节点。将新算法与4种典型的节点选择算法进行了对比,仿真实验证明该算法能够在较短时间内选择出接近最优算法得到的组合,综合性能优于现有节点选择算法。     

Information disclosure with endogenous channel structure

This article investigates the firms' optimal quality information disclosure strategies in a supply chain, wherein the supplier may encroach into the retail channel to sell products directly to end consumers. We consider two disclosure formats, namely, retailer disclosure (R-C) and supplier disclosure (S-C), and examine the optimal disclosure format from each firm's perspective. We show that either firm prefers to delegate the disclosure option to its partner when the supplier cannot encroach. However, the threat of supplier encroachment dramatically alters the firm's preference of disclosure. The supplier may prefer the S-C format to the R-C format when the entry cost is low and the disclosure cost is high to achieve a higher quality information transparency. Meanwhile, the retailer may prefer the R-C format to the S-C format when the entry cost is intermediate to deter the possible encroachment of the supplier. In this sense, the firms' preferences of disclosure format can be aligned due to the threat of supplier encroachment. The consumer surplus is always higher under the S-C format while either disclosure format can lead to a higher social welfare. We also consider an alternative scenario under which the supplier encroaches after the product quality information is disclosed. An interesting observation appears that the supplier may encroach when the product quality is low but foregoes encroachment when the product quality gets higher.