运动激光辐照圆柱薄壳温度场的数值模拟

对圆柱薄壳在四种不同运动模式激光源辐照下的温度场分布进行了分析研究。运用傅立叶级数展开法推导了在不同运动模式激光源作用下圆柱薄壳温度场的解析表达式,并对该解析表达式进行了编程计算,其计算结果与有限元解吻合良好。详细分析了旋转角速度与平动速度对圆柱壳温升分布的影响,发现在往复运动加热模式下光斑区域的温升变化最为剧烈。计算结果为导弹的抗激光辐射提供了理论依据。     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

基于SysML的车辆信息系统设计

针对目前车辆信息系统缺乏有效设计方法的现状,结合新时期车辆信息系统的特点,提出了一种基于SysML的车辆信息系统设计方法。该方法明确了车辆信息系统设计过程的阶段和产物,并通过标准建模语言SysML的运用,用模型来支持系统的设计和有效性验证。该方法在智能巡航系统的设计中得到了运用。实践结果表明,该方法不仅能够自顶向下完整地设计系统、利用可视化的语言准确清晰地描述系统,而且能够在系统设计层面对系统功能逻辑和数据流进行动态仿真和迭代验证。该方法能够较好地指导新时期车辆信息系统的设计过程,满足信息系统的设计要求。     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

改进的接触算法及其在光滑粒子流体动力学中的应用

采用以黎曼解描述粒子间相互作用的接触算法,模拟一维情况下包含间断的流场。在弱间断的条件下,采用弱波近似的黎曼解来描述粒子间的相互作用;在强间断的条件下,则引入非迭代黎曼解来描述粒子间的相互作用。并引入Taylor展开思想,提高了接触算法在自由边界的计算精度。该算法无需引入人为粘性,程序结构简洁。数值计算表明,改进后的接触算法能很好地描述强间断,并有效改善了原始接触算法在自由面的计算缺陷。     

基于生物视觉原理的图像结构信息变化检测方法

为克服多时相遥感图像变化检测中照度差异和配准误差的影响,采用边缘结构信息进行变化检测。利用多方向Gabor函数从图像梯度强度图中提取边缘结构信息,称之为边缘标记(Edge Tag,ET),通过比较多时相遥感图像中ET的互相关系数实现变化检测。为减小差异较小的边缘对检测结果的影响,在相关系数的计算中引入抑制因子。仿真图像和真实图像的实验结果表明,该方法能克服图像照度差异和配准误差对变化检测的影响,取得了较好的检测效果。     

利用混合编程改善SMP机群上并行矩阵乘法的性能

针对SMP机群,探讨了分别利用单机优化、OpenMP与MPI从指令级、共享存储级与分布主存级三个层次上改善矩阵并行乘Fox算法性能的方法。并通过调用数学函数库与混合编程的方式,在深腾6800上进行了实验,取得了相当满意的数值效果。