电磁炮炮管振动信号分析及处理方法

炮管发射振动是影响电磁炮发射稳定性及射击精度的关键因素,获取炮管振动信号有效数据,对优化其发射性能具有重要的意义.在对电磁炮炮管振动信号分析的基础上,提出了采用小波阈值去噪和最小二乘法相结合的信号处理方法来去除振动干扰信号,通过仿真实验,理论验证了该信号处理方法的有效性;设计测试系统进行振动实测实验,并使用该信号处理方法获得振动有效信号,进一步验证了该方法的有效性和实用性;计算得到炮管振动位移参量,为电磁炮设计、优化提供了理论依据.     

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s⁻¹ is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s⁻¹, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the corresponding strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.     

Investigation on the process parameters of TIG-welded aluminum alloy through mechanical and microstructural characterization

Multi-pass TIG welding was conducted on plates (15×300×180 mm3) of aluminum alloy Al-5083 that usually serves as the component material in structural applications such as cryogenics and chemical processing industries. Porosity formation and solidification cracking are the most common defects when TIG welding Al-5083 alloy, which is sensitive to the welding heat input. In the experiment, the heat input was varied from 0.89 kJ/mm to 5 kJ/mm designed by the combination of welding torch travel speed and welding current. Tensile, micro-Vicker hardness and Charpy impact tests were executed to witness the impetus response of heat input on the mechanical properties of the joints. Radiographic inspection was performed to assess the joint's quality and welding defects. The results show that all the specimens displayed inferior mechanical properties as compared to the base alloy. It was established that porosity was progressively abridged by the increase of heat input. The results also clinched that the use of me-dium heat input (1-2 kJ/mm) offered the best mechanical properties by eradicating welding defects, in which only about 18.26% of strength was lost. The yield strength of all the welded specimens remained unaffected indicated no influence of heat input. Partially melted zone (PMZ) width also affected by heat input, which became widened with the increase of heat input. The grain size of PMZ was found to be coarser than the respective grain size in the fusion zone. Charpy impact testing revealed that the absorbed energy by low heat input specimen (welded at high speed) was greater than that of high heat input (welded at low speed) because of low porosity and the formation of equiaxed grains which induce better impact toughness. Cryogenic (-196 C) impact testing was also performed and the results corroborate that impact properties under the cryogenic environment revealed no appreciable change after welding at designated heat input. Finally, Macro and micro fractured surfaces of tensile and impact specimens were analyzed using Stereo and Scanning Electron Microscopy (SEM), which have supported the experimental findings.     

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7 mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS)—in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61 cm at a target range of 200 m. Variance analysis indicated that the entry angle — i.e. the initial position of mass eccentricity — had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (Izz Iyy), the mass of a projectile (m), the distance between nose and center of mass along the symmetry axis for a projectile (Lm), and the eccentric distance of the centroid (Lr). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.     

基于正交最小二乘估计的非线性时间序列的预测

在对非线性时间序列的短期预测中经常采用局部线性化的预测算法 ,原有的算法使用普通最小二乘法 (LS)估计近似线性模型的参数。对于存在噪声的数据 ,该算法的数值稳定性较差。本文在对非线性空间进行局部线性化的基础上 ,采用正交最小二乘方法 (OLS)对线性模型同时进行结构选择与参数辨识 ,改善了数值的病态特性 ,增强了算法的稳定性     

嵌银丝贫氧推进剂燃烧特性

采用试验发动机法 ,对嵌银丝铝镁贫氧推进剂的燃烧特性进行了研究 ,得到了低压下嵌银丝铝镁贫氧推进剂的燃烧规律 ,研究了银丝直径和贫氧推进剂配方对嵌银丝发动机燃速的影响。结果表明 ,嵌银丝贫氧推进剂的燃烧过程由初始工作段、稳定工作段和结束段组成 ;采用较粗的银丝 (0 3mm和0 4mm)可以显著提高贫氧推进剂的燃速 ;提高贫氧推进剂的基础燃速也是提高嵌银丝贫氧推进剂燃速的有效方法之一。     

军事装备学学科建设与发展研究

论述了我院军事装备学学科建设与发展的研究内容,包括学科方向调整与队伍优化、课程体系构建和课程内容优化、教材建设规划等.     

柱锥级联型爆磁压缩发生器的实验研究

研究了柱锥级联型爆磁压缩发生器。给出了主要实验结果。发生器的负载是3.5μH,最大电流是55.8KA,上升前沿是14.3μs,电压为30.5KV。平均电流放大倍数是6.4。     

大功率气体开关重复频率的理论分析

分析了影响气体开关重复频率的各因素,从理论上推导了开关耗能的恢复时间以及气体的冷却时间对重复频率的影响。提出了提高重复频率的方法。     

MIMD上三层格式的窗口并行迭代方法

本文对一般的三层格式给出了在MIMD 机上实现的窗口并行迭代方法,给出了WBJ 格式,分析了三层格式的收敛性。文章的结论表明窗口并行迭代法的收敛性与窗口大小无关,窗口大小影响每台处理机的使用效率。