5GHz雷达的干扰计算模型概述

文章从开发5 GHz模型的目的入手,简要介绍了5 GHz模型的结构组成,详细讨论了5 GHz模型的干扰计算流程,包括无线局域网和雷达的场景设置、技术参数设置、总干扰计算等,最后给出了5 GHz模型的一个运行范例,以期为其它干扰模型的开发提供借鉴参考。     

Effects of total pressures and equivalence ratios on kerosene/air rotating detonation engines using a paralleling CE/SE method

In this paper, the kerosene/air rotating detonation engines(RDE) are numerically investigated, and the emphasis is laid on the effects of total pressures and equivalence ratios on the operation characteristics of RDE including the initiation, instabilities, and propulsive performance. A hybrid MPI + OpenMP parallel computing model is applied and it is proved to be able to obtain a more effective parallel performance on high performance computing(HPC) systems. A series of cases with the total pressure of 1 MPa, 1.5 MPa, 2 MPa, and the equivalence ratio of 0.9, 1, 1.4 are simulated. On one hand, the total pressure shows a significant impact on the instabilities of rotating detonation waves. The instability phenomenon is observed in cases with low total pressure (1 MPa) and weakened with the increase of the total pressure. The total pressure has a small impact on the detonation wave velocity and the specific impulse. On the other hand, the equivalence ratio shows a negligible influence on the instabilities, while it affects the ignition process and accounts for the detonation velocity deficit. It is more difficult to initiate rotating detonation waves directly in the lean fuel operation condition. Little difference was observed in the thrust with different equivalence ratios of 0.9, 1, and 1.4. The highest specific impulse was obtained in the lean fuel cases, which is around 2700 s. The findings could provide insights into the understanding of the operation characteristics of kerosene/air RDE.     

Mechanical behavior and failure mechanism of polyurea nanocomposites under quasi-static and dynamic compressive loading

Polyurea is an elastomeric material that can be applied to enhance the protection ability of structures under blast and impact loading.In order to study the compressive mechanical properties of SiC/polyurea nanocomposites under quasi-static and dynamic loading,a universal testing machine and split Hop-kinson pressure bar(SHPB)apparatus were used respectively.The stress-strain curves were obtained on polyurea and its composites at strain rates of 0.001-8000 s-1.The results of the experiment suggested that increase in the strain rates led to the rise of the flow stress,compressive strength,strain rate sensitivity and strain energy.This indicates that all of the presented materials were dependent on strain rate.Moreover,these mechanical characters were enhanced by incorporating a small amount of SiC into polyurea matrix.The relation between yield stress and strain rates were established using the power law functions.Finally,in order to investigate the fracture surfaces and inside information of failed specimens,scanning electron microscopy(SEM)and micro X-ray computed tomography(micro-CT)were used respectively.Multiple voids,crazes,micro-cracks and cracking were observed in fracture surfaces.On the other hand,the cracking propagation was found in the micro-CT slice images.It is essential to understand the deformation and failure mechanisms in all the polyurea materials.     

多传感器多机动目标跟踪方法研究进展

讨论了多传感器多机动目标的研究现状,分析了几种跟踪滤波器的性能,着重探讨了交互多模型(IMM)算法的发展状况和应用。同时还研究了多传感器跟踪多机动目标过程中的数据关联方法。最后指出,寻求采用自适应变结构的IMM算法,研究模型切换过程中算法的过渡性能,以及在数据关联中引入混沌、遗传算法等智能控制方法,将是未来多传感器多机动目标研究的方向。     

气象卫星的军事应用

为了研究全球气象卫星在军事领域的应用情况,通过对相关国家气象卫星的种类以及军事应用的特点、简要发展史、现状,以及在现代战争中的应用等情况进行了阐述,并重点介绍了气象卫星在伊拉克战争中的应用,结果表明气象卫星作为信息化军队的重要资源之一,对国防建设,尤其是对现代高技术条件下的局部战争具有深远的影响。     

基于XML的数据采集交换系统

从技术需求、系统结构等方面全面介绍了一种基于XML的数据采集交换系统的设计与实现。该系统基于XML技术, 结合迅速发展的信息采集需求, 实现了大范围的数据资源的采集、交换与共享。该系统已成功应用于国家“863”计划项目: 智能化农业信息处理系统———河北示范区建设。     

沉浸式虚拟维修仿真中的穿越处理问题研究

沉浸式虚拟维修环境下,物体间发生穿越的碰撞问题可以分为3类:1点接触,2点接触和3点及3点以上接触。采用改变碰撞物体的运动方向和距离的方式来避免物体间穿越现象的发生。并以实例的方式对其有效性进行了验证。     

基于D-S证据推理的多传感器信息融合技术在战场目标识别中的应用

近年来,多传感器信息融合技术已经在许多领域得到了广泛的应用,该技术也可以用于战场目标识别.在简单介绍了多传感器信息融合技术的概念和方法之后,详细阐明了D-S证据推理的原理及其应用于战场目标识别的方法,并进行了仿真处理.仿真结果说明,基于D-S证据推理的多传感器信息融合技术,是解决目标识别问题的一种有效方法.     

基于方位起伏方差的目标识别方法

根据潜艇目标亮点模型的方位起伏,提出了一种基于目标方位起伏方差的目标识别方法.给出了具体的实现方案和相应的仿真结果.仿真结果表明,按照该方案设计的目标识别系统,只要根据试验修正判决门限的设定,就可以使鱼雷准确地识别真假目标.     

自航式鱼雷发射装置发射管长度优化研究

基于某型鱼雷自航发射的内弹道数学模型,选择自航管的总长度作为优化目标,讨论了约束函数的取值,确定了优化问题的数学表达.采用惩罚函数法进行寻优计算,针对约束函数具有不可微和非线性的特点,采用模式搜索算法进行了无约束优化的求解,给出了优化结果并进行了比较.