Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

Combustion of B4C/KNO3 binary pyrotechnic system

Presented herein is an experimental study on the combustion of B4C/KNO3 binary pyrotechnic system.Combustion products were tested using X-ray diffraction(XRD),scanning electron microscopy(SEM),and energy dispersive spectrometer(EDS).According to the results of tests and CEA calculation,the combustion reaction equation was established.The flames and burning rates were recorded by a high speed camera and a spectrophotometer.The effect of B4C particle size on the thermal sensitivity of B4C/KNO3 was investigated by differential scanning calorimetry(DSC)techniques.In addition,a reliable method for calculating the flame temperature was proposed.Based on the results of experiments,the combustion reaction mechanism was briefly analyzed.The burning rate,flame temperature and thermal sensitivity of B4C/KNC3 increase with the decrease of B4C particle size.The mass ratio of B4C/KNO3 has a great effect on combustion properties.Oxidizer-rich compositions have low flame temperatures,low burning rates,and provide green light emission.The combustion reactions of fuel-rich compositions are vigorous,and the B4C/KNO3 with mass ratio of 25:75 has the highest burning rate and the highest flame temperature.     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

Effect of the end cap on the fragment velocity distribution of a cylindrical cased charge

The prediction of the fragment velocity distribution of a cylindrical cased charge with end caps is one of the key issues to assess the damage efficiency of the warhead. However, limited work has been con-ducted to predict the fragment velocity distributions along the axis of cylindrical cased charges with end caps. This paper presents a study of the velocity distribution of fragments caused by the explosion of a cylindrical cased charge with end caps. The fragment velocity distribution and the end cap velocity were determined by an X-ray radiography method, and the axial fragment distribution was determined by witness plates. It was found that the velocities of fragments, especially near the edge, were increased when the end caps were added, and the position of maximum velocity is closer to the non-detonation end. The fragment velocities were increased, and the fragment projection range was decreased with the increase of the thickness of the end cap. A formula for fragment velocity distributions of a cylindrical cased charge with end caps, which is based on Huang's formula, was proposed by the theoretical analysis and data fitting and validated experimentally. The results indicate that the proposed formula is accurate in predicting the fragment velocity distribution along the axis of a cylindrical cased charge with end caps detonated at one end.     

深海安全问题的认识思考

贯彻落实总体国家安全观,既需关注传统领域安全,又需关注新兴领域安全.深海作为新兴战略领域,研究深海安全意义重大.从安全研究的视角出发,初步思考了深海开发建设过程中需要关注的几个安全问题,可为深海安全深化研究提供支撑,希望引发更多的人去关注深海安全,促进深海开发与深海安全和谐发展.     

应用电弧喷涂技术治理舰船钢结构腐蚀

本文论述了舰船钢结构的腐蚀机理,腐蚀特点及影响因素.指出电弧喷涂铝复合涂层能够长期有效地对舰船钢结构进行腐蚀保护,延长舰船钢结构的使用寿命,这是其它任何腐蚀防护技术都难以实现的.电弧喷涂铝复合涂层的具体涂层设计是:电弧喷涂铝金属涂层十有机封闭涂料涂层十常规舰船面层涂料涂层.     

平台罗经自动测试系统（PLTS）的研究

平台罗经自动测试系统用于ＰＬ－Ⅰ型平台罗经的性能测试和故障诊断,本文介绍该系统的结构、性能、特点及软硬件组成。     

显控台台面结构造型及智能键盘加固

本文根据人－机工程原理和产品设计要求,介绍了潜用显控台大平面小角度台面结构造型,智能键盘电路板加固等设计思想,作者通过工程实践,特别是某产品显控台结构设计．提出了一些设计思想,列举了不少实例,可供同行参考。     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012