超大体量高层医院消防安全疏散设计

高层医院的建筑消防设计攸关医院特殊人群的安全问题,在进行该类建筑消防安全疏散设计时应着重进行考虑。但是由于医院设计需首先满足医疗工艺的要求,因此,在疏散设计时往往会与有关规范产生矛盾。通过对某国际医院建筑消防设计案例的分析,主要从疏散楼梯间设计、特殊人群疏散设计两方面提出了超大体量高层建筑消防安全疏散设计的建议。     

全地形加油车高机动性底盘选型研究

底盘选型研究是保证新型加油车机动性大幅提升的基础.评析了标志地面车辆通行能力的多种概念,根据车辆机动性评估原理,提出了涵盖车辆快速性、支承通过性和几何通过性的机动性量化评估模型.应用该评估模型评定了备选车辆的机动性,验证了评估模型的有效性,选定了全地形加油车高机动性底盘,为车辆机动性的量化评估提供了研究思路.     

Using stochastic programming to solve an outpatient appointment scheduling problem with random service and arrival times

We study a stochastic outpatient appointment scheduling problem (SOASP) in which we need to design a schedule and an adaptive rescheduling (i.e., resequencing or declining) policy for a set of patients. Each patient has a known type and associated probability distributions of random service duration and random arrival time. Finding a provably optimal solution to this problem requires solving a multistage stochastic mixed‐integer program (MSMIP) with a schedule optimization problem solved at each stage, determining the optimal rescheduling policy over the various random service durations and arrival times. In recognition that this MSMIP is intractable, we first consider a two‐stage model (TSM) that relaxes the nonanticipativity constraints of MSMIP and so yields a lower bound. Second, we derive a set of valid inequalities to strengthen and improve the solvability of the TSM formulation. Third, we obtain an upper bound for the MSMIP by solving the TSM under the feasible (and easily implementable) appointment order (AO) policy, which requires that patients are served in the order of their scheduled appointments, independent of their actual arrival times. Fourth, we propose a Monte Carlo approach to evaluate the relative gap between the MSMIP upper and lower bounds. Finally, in a series of numerical experiments, we show that these two bounds are very close in a wide range of SOASP instances, demonstrating the near‐optimality of the AO policy. We also identify parameter settings that result in a large gap in between these two bounds. Accordingly, we propose an alternative policy based on neighbor‐swapping. We demonstrate that this alternative policy leads to a much tighter upper bound and significantly shrinks the gap.     

主动谐波消除多电平射频脉宽调制策略及其性能分析

为降低全数字发信机(All-Digital Transmitters, ADTx)的输出谐波要求,提高系统宽频带工作性能,提出并实现适用于全数字发信机的多电平射频脉宽调制(Radio Frequency Pulse Width Modulation, RF-PWM)策略。该方法通过控制各子脉冲的脉冲宽度,在基波分量加权之和正比于输入信号包络的前提下,实现对RF-PWM脉冲序列特定谐波分量的有效抑制。以3次谐波消除为例,对该5电平RF-PWM策略实现方案进行推导,同时分析验证了该方案下脉冲基波分量与信号幅度之间的最佳增益系数。在此基础上,利用软件仿真验证了理论分析结果以及主动谐波抑制RF-PWM策略的有效性。     

Fullerene bisadduct stabilizers: The effect of different addition positions on inhibiting the autocatalytic decomposition of nitrocellulose absorbed nitroglycerin

To explore the effect of different positions and number of pyrrolidine bound to the carbon cage on the stabilization effect of fulleropyrrolidine derivatives to nitrocellulose (NC)/nitroglycerine (NG), we synthesized N-(4-methoxy) phenylpyrrolidine-C₆₀ and four different of bis(N-(4-methoxy) phenylpyrrolidine)-C₆₀ compounds through Prato reaction. Their structures were characterized by UV–vis, ¹H NMR, ¹³C NMR, high-resolution mass spectroscopy, and single-crystal X-ray diffraction. Their stabilization effect to NC/NG were investigated using differential scanning calorimetry, methyl violet, vacuum stabilization effect, weight loss, and accelerating rate calorimeter tests. The results indicated these compounds had excellent stabilization effect to NC/NG. The stabilization effect of the fulleropyrrolidine bisadducts to NC/NG is significantly better than that of fulleropyrrolidine monoadduct and C₆₀. Moreover, the position where pyrrolidine binds to fullerene in fulleropyrrolidine bisadducts is different, and its stabilization effect to NC is also different. The stabilization effect order of different bisadduct isomers to nitrocellulose is as follows: e-edge > trans-2> cis-2> trans-3. Electron paramagnetic resonance (EPR) and FT-IR were used to study the stabilization mechanism of fulleropyrrolidine derivatives to NC/NG. The EPR results also show that fulleropyrrolidine bisadducts with different addition sites have different abilities to absorb nitroxide, and their ability is better than that of the monoadduct and C₆₀, which is consistent with the results of stabilization effect performance test.     

Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

超音速等离子喷涂WC-Co涂层性能研究

用超音速等离子喷涂(HEPJet)和2种进口高速氧燃气火焰喷涂设备 (HVOF:JP-5000和DJ-2700)制备WC-Co涂层,进行了孔隙率、显微硬度、结合强度及30°和90°攻角的冲蚀磨损对比试验,用XRD分析了粉末和涂层的相结构,用 SEM分析了粉末和涂层的表面和断面形貌。结果表明3种工艺制备的WC-Co涂层与粉末的相结构类似,均无明显氧化、失碳;超音速等离子喷涂WC-Co涂层综合性能与JP-5000相当,要优于DJ-2700。     

数字化扩频接收机的自适应抗干扰滤波方案研究

讨论了自适应抗干扰滤波在最小频移键控的直接序列扩频(DS-MSK)数字化接收机中的应用问题,对非线性滤波加以改进,提出了部分解扩非线性滤波(PDNF)结构,将快速更新子带自适应滤波(FRSAF)算法用于PDNF结构以提高收敛速度。结合FRSAF算法的PDNF自适应抗干扰滤波方案在收敛速度、稳健性和输出信噪比等方面明显优于结合LMS算法的传统非线性抗干扰滤波方案,仿真结果验证了上述结论。     

Si3 N4基复相陶瓷天线罩材料的制备及性能

基于高马赫数导弹天线罩为应用背景,以Si粉、BN粉、SiO2粉为主要原料,采用反应烧结法制备Si3N4基复相陶瓷材料,探讨了原料组成、成型工艺及坯体密度对材料性能的影响。试验结果表明:当原料中Si、BN和SiO2分别为55%、30%和10%时,材料强度可达96.7MPa,断裂韧性可达1.80MPa.m1/2。同时材料具有良好的介电性能及热物理性能。     

互耦影响存在时修正MUSIC算法的DOA估计

首先用矩量法精确分析了考虑互耦影响时天线阵元的电流分布,给出了计算电流的解析式,并仿真计算了单元直线阵的电流分布。然后以等效网络法为基础研究互耦影响存在时修正MUSIC算法的DOA估计性能,仿真实验表明在互耦影响存在时MUSIC算法失效,而修正MUSIC算法仍然具有良好的DOA估计性能。