超大体量高层医院消防安全疏散设计

高层医院的建筑消防设计攸关医院特殊人群的安全问题,在进行该类建筑消防安全疏散设计时应着重进行考虑。但是由于医院设计需首先满足医疗工艺的要求,因此,在疏散设计时往往会与有关规范产生矛盾。通过对某国际医院建筑消防设计案例的分析,主要从疏散楼梯间设计、特殊人群疏散设计两方面提出了超大体量高层建筑消防安全疏散设计的建议。     

全地形加油车高机动性底盘选型研究

底盘选型研究是保证新型加油车机动性大幅提升的基础.评析了标志地面车辆通行能力的多种概念,根据车辆机动性评估原理,提出了涵盖车辆快速性、支承通过性和几何通过性的机动性量化评估模型.应用该评估模型评定了备选车辆的机动性,验证了评估模型的有效性,选定了全地形加油车高机动性底盘,为车辆机动性的量化评估提供了研究思路.     

群众路线:中国共产党的根本路线

群众路线是我们党创造性地运用马克思主义的群众观点创立的根本路线,是我们党的优良传统和政治优势.新形势下坚持群众路线,是巩固党的执政地位的必然要求,是推进中国特色社会主义宏伟事业的强大动力,是构建社会主义和谐社会的重要因素,是党的执政能力建设和作风建设的核心所在.当前要结合人民群众的新特点,探索坚持群众路线的新规律;着眼人民群众的新诉求,拓展坚持群众路线的新载体;汲取人民群众的新创见,丰富坚持群众路线的新形式,不断开创坚持群众路线的新局面.     

复杂电磁环境下电子系统仿生防护模式研究

阐述电磁防护工作中仿生研究所需要涉及的学科类型和基本内容,对所做工作在整个仿生领域中进行大致的定位;提出生物一电子研究的对等模型、总体构成和实现基础,细化具体研究的方向、设想和防护模式,并从原型实现的工程角度介绍实施策略,使得复杂电磁干扰环境下控制系统板卡及芯片级防护的仿生构想在技术上成为可能。     

滑块机构下高旋弹头的逆系统设计方法

建立了滑块机构下高旋弹的姿态方程,采用逆系统方法对非线性模型进行了解耦控制研究,得到了完整的状态方程,分析了基于逆系统理论解耦的可行性,推导出状态反馈后的a阶伪线性系统和内环控制算法,而后用极点配置原理设计了外环PID(Proportional Integral Derivative)控制律,形成了完整的闭环控制结构,...     

基于不确定度的专家评价综合方法

针对群决策中专家评价信息的综合处理问题,应用多位专家评价的评价样本不确定度,提出了基于不确定度的数据综合处理方法。该方法能够有效应用于群决策问题,尤其是参与决策人员(专家)较多时,出现专家相对权重可信度不明确而导致评价准确度低的问题,科学地简化了群决策中专家权重的确定过程,便于应用,具有坚实的理论依据和应用价值。通过算例分析,该方法的有效性得到了验证。     

Using stochastic programming to solve an outpatient appointment scheduling problem with random service and arrival times

We study a stochastic outpatient appointment scheduling problem (SOASP) in which we need to design a schedule and an adaptive rescheduling (i.e., resequencing or declining) policy for a set of patients. Each patient has a known type and associated probability distributions of random service duration and random arrival time. Finding a provably optimal solution to this problem requires solving a multistage stochastic mixed‐integer program (MSMIP) with a schedule optimization problem solved at each stage, determining the optimal rescheduling policy over the various random service durations and arrival times. In recognition that this MSMIP is intractable, we first consider a two‐stage model (TSM) that relaxes the nonanticipativity constraints of MSMIP and so yields a lower bound. Second, we derive a set of valid inequalities to strengthen and improve the solvability of the TSM formulation. Third, we obtain an upper bound for the MSMIP by solving the TSM under the feasible (and easily implementable) appointment order (AO) policy, which requires that patients are served in the order of their scheduled appointments, independent of their actual arrival times. Fourth, we propose a Monte Carlo approach to evaluate the relative gap between the MSMIP upper and lower bounds. Finally, in a series of numerical experiments, we show that these two bounds are very close in a wide range of SOASP instances, demonstrating the near‐optimality of the AO policy. We also identify parameter settings that result in a large gap in between these two bounds. Accordingly, we propose an alternative policy based on neighbor‐swapping. We demonstrate that this alternative policy leads to a much tighter upper bound and significantly shrinks the gap.     

主动谐波消除多电平射频脉宽调制策略及其性能分析

为降低全数字发信机(All-Digital Transmitters, ADTx)的输出谐波要求,提高系统宽频带工作性能,提出并实现适用于全数字发信机的多电平射频脉宽调制(Radio Frequency Pulse Width Modulation, RF-PWM)策略。该方法通过控制各子脉冲的脉冲宽度,在基波分量加权之和正比于输入信号包络的前提下,实现对RF-PWM脉冲序列特定谐波分量的有效抑制。以3次谐波消除为例,对该5电平RF-PWM策略实现方案进行推导,同时分析验证了该方案下脉冲基波分量与信号幅度之间的最佳增益系数。在此基础上,利用软件仿真验证了理论分析结果以及主动谐波抑制RF-PWM策略的有效性。     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Visual SLAM in dynamic environments based on object detection

A great number of visual simultaneous localization and mapping (VSLAM) systems need to assume static features in the environment. However, moving objects can vastly impair the performance of a VSLAM system which relies on the static-world assumption. To cope with this challenging topic, a real-time and robust VSLAM system based on ORB-SLAM2 for dynamic environments was proposed. To reduce the influence of dynamic content, we incorporate the deep-learning-based object detection method in the visual odometry, then the dynamic object probability model is added to raise the efficiency of object detection deep neural network and enhance the real-time performance of our system. Experiment with both on the TUM and KITTI benchmark dataset, as well as in a real-world environment, the results clarify that our method can significantly reduce the tracking error or drift, enhance the robustness, accuracy and stability of the VSLAM system in dynamic scenes.