Effect of projectile parameters on opening behavior of PELE penetrating RC target

When a penetrator with enhanced lateral effect (PELE) impacts on a reinforced concrete (RC) target, the target is damaged with a large opening. An understanding of how PELE projectile parameters affect the opening dimension, is essential for effective design of the PELE projectile. In this study, under the condition that the impact velocity and target parameters (strength and thickness) were fixed values, the important influence factors of the PELE (jacket wall thickness B, jacket material strength Y1, filling material strength Y2 and angle of monolithic jacketθ) were determined by a dimensional analysis. Tests and simulations of the PELE penetrating the RC target were conducted to analyze the influence of these factors on opening diameter ((D), an equivalent diameter under relative kinetic energy). Based on the test and simulation results, it is found that the influence of these factors B, Y1 andθon the deformation mode of the jacket shows a similar trend:as values of the three factors decrease, the jacket deforms from small bending deformation to large one, and then to curling deformation. This causes the opening diameter to first increase with the decrease of these three factors, and then decreases. It is well known that the bending resistance of the jacket is related to these factors B, Y1 andθ. Therefore, a plastic limit bending moment (M0) of the jacket was quoted to characterize the influence of these factors on the bending deformation of the jacket and the opening diameter of the target. The influence factor Y2 causes (D) to first increase with the increase of Y2, and then decreases. A formula was developed to predict the opening diameter, whose influence parameters were considered in a dimensionless way. It has been shown that the dimensionless opening diameter (D)/d1 is dependent on two dimensionless parameters Q = (d31fc/M0) and G = (fc/Y2), where d1 and fc are the outer diameter of the projectile and the compressive strength of the target, respectively.     

A new energy efficient management approach for wireless sensor networks in target tracking

This paper mainly studied the problem of energy conserving in wireless sensor networks for target tracking in defensing combats. Firstly, the structures of wireless sensor nodes and networks were illustrated; Secondly, the analysis of existing energy consuming in the sensing layer and its calculation method were provided to build the energy conserving objective function; What's more, the other two indicators in target tracking, including target detection probability and tracking accuracy, were combined to be regarded as the constraints of the energy conserving objective function. Fourthly, the three energy conserving approaches, containing optimizing the management scheme, prolonging the time interval between two adjacent observations, and transmitting the observations selectively, were introduced; In addition, the improved lion algorithm combined with the Logistic chaos sequence was proposed to obtain sensor management schemes. Finally, simulations had been made to prove the effectiveness of the proposed methods and algorithm.     

反"战斧"导弹的GPS欺骗措施分析与同温层气球干扰平台的实现

针对“战斧”(DeepFire)巡航导弹武器系统弱点提出对抗和干扰欺骗措施 ,指出了GPS导航系统的弱点 ,设计了GPS干扰 /欺骗机 (GPSSpoofor)的原理模型 ,提出应用同温层气球作为GPS干扰 /欺骗机载体 ,并作了可行性分析、系统生存能力分析、系统对抗效能分析。详细介绍了同温层气球平台的地面、空中保障系统。     

论推行综合寿命周期费用控制法

为了走出一条投入较少,效益较高的军队现代化的路子,解决我军武器装备发展与有限国防经费之间的矛盾。根据装备的全系统全寿命管理的一般原理和国外装备寿命周期费用方法,结合国情与军情,首次提出了一套综合寿命周期费用控制法,以便对我军装备的费用进行有效的管理与控制。同时提出了为推广该法当前急需做好的几项工作。     

用单球法测量大直径锯齿形螺纹中径的原理及装置

本文论述了用单球法测量大直径锯齿形螺纹中径的原理与方法，具体介绍了为实现这种方法而设计的检测装置。对这个装置进行了精度标定和测试，实验表明，该测量仪器使用方便，精度较高，具有较强的实用性。     

基于热物理仿真分析的红外点目标特征提取与识别

根据弹道中段空间目标和诱饵的表面温度分布规律，从热物理的角度分析了目标和诱饵的红外光谱辐射特性，指出了弹道中段目标和诱饵红外辐射特性的本质差别，并据此提出了红外目标识别中的特征基函数，用特征基函数构造红外点目标识别的四维特征矢量。仿真实验表明，这一特征矢量用于红外点目标识别非常成功。     

硬脆材料的缓进给半塑性化磨削

分析了用缓进给方法实现硬脆材料半塑性化磨削的机理，提出了衡量半塑性化磨削效果的破碎率指标，介绍了实验方法和实验结果，对实验结果进行了分析比较。实验结果表明，在普通磨床上可实现硬脆材料的半塑性化磨削，采用缓进给磨削方法可以显著地提高半塑性化磨削的效果。     

C++Builder 控件技术在自助售票机中的应用

用C++Builder强有力的控件技术及多线程技术,实现一个32位串口控件,并将其应用于串行设备软件接口,走出传统的由动态链接库提供低层接口软件的方式,从而大大减轻上层应用软件的开发负担     

一个基于 WEB 的分布式仿真环境

现有的许多仿真环境，由于采用某一种语言或基于库方法开发，缺乏对已有仿真模型和仿真工具复用的能力，且依赖于特定的操作系统和硬件平台，尤其缺乏在Ｉｎｔｅｒｎｅｔ上运行的能力。本文针对这些不足，采用软件复用和构件技术、Ｊａｖａ 语言和ＣＯＲＢＡ 标准相结合的方法，提出了一个基于Ｗｅｂ 的分布式仿真环境框架（ＤＳＥＷ），并进行了实例分现有的许多仿真环境，由于采用某一种语言或基于库方法开发，缺乏对已有仿真模型和仿真工具复用的能力，且依赖于特定的操作系统和硬件平台，尤其缺乏在Ｉｎｔｅｒｎｅｔ上运行的能力。本文针对这些不足，采用软件复用和构件技术、Ｊａｖａ 语言和ＣＯＲＢＡ 标准相结合的方法，提出了一个基于Ｗｅｂ 的分布式仿真环境框架（ＤＳＥＷ），并进行了实例分析     

对流层散射信道传递时间信号的抖动抑制模型

对流层散射信道传递时间同步信号过程中,信道的多径效应及噪声会引起信号抖动。为抑制抖动、提高时间同步精度,引入经验模态分解和小波阈值组合的抖动抑制模型。组合抖动抑制模型中,首先根据经验模态分解原理对原始信号进行分解,然后利用小波阈值对分解得到的各分量进行处理,最终利用处理结果重构信号。为提高组合模型的抖动抑制效果和原始信号的保持能力,利用连续性好、柔和度高的阈值函数对小波阈值中的传统阈值函数进行改进。利用实测数据验证模型的结果表明,在抖动抑制和信号保留方面,组合模型较单一模型以及常用的Kalman模型优势明显。