用阳线磨损量表征火炮初速减退量

用药室增长量预估线膛火炮初速下降量精度很低,根据火炮身管烧蚀磨损特点,本文提出了用身管严重磨损段阳线磨损量表征火炮初速减退量,在130mm加农炮上所做试验表明,用该方法可提高大口径火炮初速下降量的预估精度。     

敦煌旅游业可持续发展研究初探

可持续发展已成为全球和地区经济发展的热点,对敦煌这样一个地处生态环境脆弱区且又正处于旅游发展成熟期的旅游地来说,探讨其可持续发展具有重要的战略意义。本文通过实地考察、对历年统计数据和调查问卷的分析,总结了敦煌旅游业发展概况,用SWTO分析法详细分析了敦煌旅游业发展现状的优势、弱点、机会与威胁,最后探讨了其可持续发展战略与对策,为敦煌旅游业的快速、持续、稳定发展提供参考。     

推进剂利用系统装订参数计算及软件集成方法

在大型航天软件中,推进剂利用系统装订参数计算对提高推进剂利用率具有重要意义。给出了利用系统装订参数的计算方法,并在基于CORBA的分布式大型软件系统中对软件集成方法进行了研究。     

Nb掺杂对双钙钛矿化合物Sr2FeMoO6电阻特性的影响

系统地研究了双钙钛矿结构氧化物Sr2FeMo1-xNbxO6中Mo位的Nb替代效应,发现Nb替代Mo可强烈抑制Sr2FeMoO6的金属导电性,并大大提高掺杂样品的电阻值和庞磁电阻特性,在5K下,Sr2FeMo0.6Nb0.4O6的庞磁电阻分别达到23%(1T)和31%(3T),在室温下,Sr2FeMo0.75Nb0.25O6的磁电阻分别达到4%(1T)和6%(3T).     

Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

基于ANSYS的预应力CFRP布加固混凝土梁有限元分析

采用ANSYS有限元分析软件,对卸载或不卸载时预应力碳纤维(CFRP)布加固梁进行仿真分析,并在有限元分析中提出了施加预应力的方法(升温法),以及利用单元的生与死实现不卸载时加固的方法。通过实例对比分析表明,基于ANSYS的有限元分析结果与试验分析结果吻合较好,可在一定程度上有效替代试验分析方法,从而减少试验所需的时间和费用,对后续的CFRP布加固混凝土结构的研究工作具有一定的参考价值。     

AMESim与MATLAB/Simulink联合仿真技术及应用

分析了AMESim与MATLAB/Simulink的特点,对两者的联合仿真技术进行了研究,解决了联合仿真的接口问题.并把该技术应用于主动悬架系统,取得了良好效果.     

跨模态行人重识别的对称网络算法

针对模态间差异,提出基于对称网络的跨模态行人重识别算法,该网络将基于概率分布的模态混淆与对抗学习结合,通过对称网络产生模态不变特征,从而达到模态混淆的目的;针对外观差异和模态内差异,使用不同隐藏层的网络卷积特征构造混合三元损失,提高网络的特征表征能力.RegDB和SYSU-MM01数据集上的大量实验结果表明了该方法的有...     

Background dominant colors extraction method based on color image quick fuzzy c-means clustering algorithm

A quick and accurate extraction of dominant colors of background images is the basis of adaptive camouflage design. This paper proposes a Color Image Quick Fuzzy C-Means (CIQFCM) clustering algorithm based on clustering spatial mapping. First, the clustering sample space was mapped from the image pixels to the quantized color space, and several methods were adopted to compress the amount of clustering samples. Then, an improved pedigree clustering algorithm was applied to obtain the initial class centers. Finally, CIQFCM clustering algorithm was used for quick extraction of dominant colors of background image. After theoretical analysis of the effect and efficiency of the CIQFCM algorithm, several experiments were carried out to discuss the selection of proper quantization intervals and to verify the effect and efficiency of the CIQFCM algorithm. The results indicated that the value of quantization intervals should be set to 4, and the proposed algorithm could improve the clustering efficiency while maintaining the clustering effect. In addition, as the image size increased from 128 × 128 to 1024 × 1024, the efficiency improvement of CIQFCM algorithm was increased from 6.44 times to 36.42 times, which demonstrated the significant advantage of CIQFCM algorithm in dominant colors extraction of large-size images.     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.