Real-time prediction of projectile penetration to laminates by training machine learning models withfinite element solver as the trainer

Studies on ballistic penetration to laminates is complicated, but important for design effective protection of structures. Experimental means of study is expensive and can often be dangerous. Numerical simu-lation has been an excellent supplement, but the computation is time-consuming. Main aim of this thesis was to develop and test an effective tool for real-time prediction of projectile penetrations to laminates by training a neural network and a decision tree regression model. A large number of finite element models were developed;the residual velocities of projectiles fromfinite element simulations were used as the target data and processed to produce sufficient number of training samples. Study focused on steel 4340tpolyurea laminates with various configurations. Four different 3D shapes of the projectiles were modeled and used in the training. The trained neural network and decision tree model was tested using independently generated test samples using finite element models. The predicted projectile velocity values using the trained machine learning models are then compared with thefinite element simulation to verify the effectiveness of the models. Additionally, both models were trained using a published experimental data of projectile impacts to predict residual velocity of projectiles for the unseen samples. Performance of both the models was evaluated and compared. Models trained with Finite element simulation data samples were found capable to give more accurate predication, compared to the models trained with experimental data, becausefinite element modeling can generate much larger training set, and thus finite element solvers can serve as an excellent teacher. This study also showed that neural network model performs better with small experimental dataset compared to decision tree regression model.     

Effect of organo-modified montmorillonite nanoclay on mechanical,thermal and ablation behavior of carbon fiber/phenolic resin composites

The mechanical, thermal and ablation properties of carbon phenolic (C-Ph) composites (Type-I) rein-forced with different weight percentages of organo-modified montmorillonite (o-MMT) nanoclay have been studied experimentally. Ball milling was used to disperse different weight (wt) percentages (0, 1,2,4,6 wt.％) of nanoclay into phenolic resin. Viscosity changes to resin due to nanoclay was studied. On the other hand, nanoclay added phenolic matrix composites (Type-II) were prepared to study the dispersion of nanoclay in phenolic matrix by small angle X-ray scattering and thermal stability changes to the matrix by thermogravimetric analyser (TGA). This data was used to understand the mechanical, thermal and ablation properties of Type-I composites. Inter laminar shear strength (ILSS), flexural strength and flexural modulus of Type I composites increased by about 29％, 12％and 7％respectively at 2 wt.％ addition of nanoclay beyond which these properties decreased. This was attributed to reduced fiber volume fraction (％Vf) of Type-I composites due to nanoclay addition at such high loadings. Mass ablation rate of Type-I composites was evaluated using oxy acetylene torch test at low heat flux (125 W/cm2) and high heat flux levels (500 W/cm2). Mass ablation rates have increased at both flux levels marginally up to 2 wt.％ addition of nanoclay beyond which it has increased significantly. This is in contrast to increased thermal stability observed for Type-I and Type-Ⅱ composites up to 2 wt.％addition of nanoclay. Increased ablation rates due to nanoclay addition was attributed to higher insulation effi-ciency of nanolcay, which accumulates more heat energy in limited area behind the ablation front and self-propagating ablation mechanisms triggered by thermal decomposition of organic part of nanoclay.     

A higher order coupled frequency characteristics study of smartmagneto-electro-elastic composite plates with cut-outs using finite element methods

This article deals with investigating the effect of cut-outs on the natural frequencies of magneto-electro-elastic (MEE) plates incorporating finite element methods based on higher order shear deformation theory (HSDT). In order to consider the influence of cut-out, the energy of the cut-out domain is sub-tracted from the total energy of the entire plate. The governing equations of motions are derived through incorporating Hamilton's principle and the solution is obtained using condensation technique. The proposed numerical formulation is verified with the results of previously published literature as well as the numerical software. In addition, this research focuses on evaluating the effect of geometrical skewness and boundary conditions on the frequency response. The influence of cut-outs on the degree of coupling between magnetic, electric and elasticfields is also investigated.     

A platform for initial testing of multiple camouflage patterns

The human visual system is still an important factor in military warfare; military personnel receive training on effective search strategies, and camouflage that can effectively conceal objects and personnel is a key component of a successful integrated survivability strategy. Previous methods of camouflage assessment have, amongst others, used psychophysics to generate distinctiveness metrics. However, the population from which the human observers are drawn is often not well defined, or necessarily appropriate. In this experiment we designed a new platform for testing multiple patterns based on a camouflaged object detection task, and investigate whether trained military observers perform better than civilians. We use a two-alternative forced choice paradigm, with participants searching images of woodland for a replica military helmet displaying Olive Green, Multi Terrain Pattern, US Marine Pattern or, as a conspicuous control, UN Peacekeeper Blue. Our data show that there is no difference in detection performance between the two observer groups but that there are clear differences in the effectiveness of the different helmet colour patterns in a temperate woodland environment. We conclude that when tasks involve very short stimulus presentation times, task-specific training has little effect on the success of target detection and thus this paradigm is particularly suitable for robust estimates of camouflage efficacy.     

Field test and probabilistic analysis of irregular steel debris casualty risks from a person-borne improvised explosive device

Person-borne improvised explosive devices (PBIEDs) are often used in terrorist attacks in Western countries. This study aims to predict the trajectories of PBIED fragments and the subsequent safety risks for people exposed to this hazard. An explosive field test with a typical PBIED composed of a plastic explosive charge and steel nut enhancements was performed to record initial fragment behaviour, including positions, velocity, and trajectory angles. These data were used to predict the full trajectory of PBIED fragments using a probabilistic analysis. In the probabilistic analyses a probability of fatality or serious injury was computed. Based on the results presented, many practical conclusions can be drawn, for instance, regarding safe evacuation distances if a person were exposed to a suspected PBIED.     

Improvement of VIS and IR camouflage properties by impregnating cotton fabric with PVB/IF-WS2

In order to examine the possibility to improve its camouflage properties standard cotton fabric with camouflage print was impregnated with poly(vinyl butyral), PVB and fullerene-like nanoparticles of tungsten disulfide, PVB/IF-WS₂. FTIR analysis excluded any possible chemical interaction of IF-WS₂ with PVB and the fabric. The camouflage behavior of the impregnated fabric has been examined firstly in the VIS part of the spectrum. Diffuse reflection, specular gloss and color coordinates were measured for three different shades (black, brown and dark green). Thermal imaging was applied to examine the camouflage abilities of this impregnation in IR part of the spectrum. The obtained results show that PVB/IF-WS₂ impregnation system induced enhacement of the materials camouflage properties, i.e. that IF-WS₂ have a positive effect on spectrophotometric characteristics of the fabric.     

Decision support model for effects estimation and proportionality assessment for targeting in cyber operations

Cyber operations are relatively a new phenomenon of the last two decades.During that period,they have increased in number,complexity,and agility,while their design and development have been processes well kept under secrecy.As a consequence,limited data(sets)regarding these incidents are available.Although various academic and practitioner public communities addressed some of the key points and dilemmas that surround cyber operations(such as attack,target identification and selection,and collateral damage),still methodologies and models are needed in order to plan,execute,and assess them in a responsibly and legally compliant way.Based on these facts,it is the aim of this article to propose a model that i))estimates and classifies the effects of cyber operations,and ii)assesses proportionality in order to support targeting decisions in cyber operations.In order to do that,a multi-layered fuzzy model was designed and implemented by analysing real and virtual realistic cyber operations combined with interviews and focus groups with technical-military experts.The proposed model was evaluated on two cyber operations use cases in a focus group with four technical-military experts.Both the design and the results of the evaluation are revealed in this article.     

Emergency transshipment in decentralized dealer networks: When to send and accept transshipment requests

While there has been significant previous literature on inventory transshipment, most research has focused on the dealers' demand filling decision (when to fill transshipment requests from other dealers), ignoring the requesting decision (when to send transshipment requests to other dealers). In this paper we develop optimal inventory transshipment policies that incorporate both types of decisions. We consider a decentralized system in which the dealers are independent of the manufacturer and of each other. We first study a network consisting of a very large number of dealers. We prove that the optimal inventory and transshipment decisions for an individual dealer are controlled by threshold rationing and requesting levels. Then, in order to study the impact of transshipment among independent dealers in a smaller dealer network, we consider a decentralized two‐dealer network and use a game theoretic approach to characterize the equilibrium inventory strategies of the individual dealers. An extensive numerical study highlights the impact of the requesting decision on the dealers' equilibrium behavior in a decentralized setting. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Optimal maintenance policies for serial,multi‐machine systems with non‐instantaneous repairs

We study optimal age‐replacement policies for machines in series with non‐instantaneous repair times by formulating two nonlinear programs: one that minimizes total cost‐rate subject to a steady‐state throughput requirement and another that maximizes steady‐state throughput subject to a cost‐rate budget constraint. Under reasonable assumptions, the single‐machine cost‐optimal and throughput‐optimal solutions are unique and orderable, and the multi‐machine optimal solutions have appealing structure. Furthermore, we establish equivalence between the two formulations and provide an illustrative numerical example. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006