脉冲压缩雷达系统分析与仿真研究

基于信号处理工作系统(SPW)仿真平台,对脉压雷达信号处理系统进行了建模与仿真技术研究。建立了脉压雷达信号处理系统的仿真模型,同时,利用仿真技术的优势,对脉压雷达信号处理系统的抗干扰(杂波、干扰和噪声)性能进行了仿真,仿真结果表明该雷达信号处理系统具有一定的抗干扰性能。上述工作为脉压雷达信号处理系统的工作过程描述、方案论证、性能评估和挖潜改造提供了仿真依据及技术支持。     

地空导弹战术单位指控节点优选算法研究

研究了地空导弹动态组网系统中的战术单位指控节点动态重组算法.讨论了算法建立的思路,分别给出了同构和异构地空导弹武器系统战术单位指控节点优化选择算法.通过复杂度分析,该算法在成员节点较少的情况下是可行的.     

The impact of demand uncertainty on product line design under endogenous substitution

The existing product line design literature devotes little attention to the effect of demand uncertainty. Due to demand uncertainty, the supply‐demand mismatch is inevitable which leads to different degrees of lost sales depending on the configuration of product lines. In this article, we adopt a stylized two‐segment setup with uncertain market sizes and illustrate the interplay between two effects: risk pooling that mitigates the impact of demand uncertainty and market segmentation that facilitates consumer differentiation. Compared to downward substitution, inducing bidirectional substitution through product line decisions including quality levels and prices can yield greater risk pooling effects. However, we show that the additional benefit from the risk pooling effect cannot compensate for the reduced market segmentation effect. We demonstrate that the presence of demand uncertainty can reduce the benefit of market segmentation and therefore the length of product lines in terms of the difference between products. We also propose three heuristics that separate product line and production decisions; each of these heuristics corresponds to one particular form of demand substitution. Our numerical studies indicate that the best of the three heuristics yields performance that is close to optimality. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 143–157, 2015     

Optimal pricing and scheduling control of product shipping

In this article, we seek to understand how a capacity‐constrained seller optimally prices and schedules product shipping to customers who are heterogeneous on willingness to pay (WTP) and willingness to wait (WTW). The capacity‐constrained seller does not observe each customer's WTP and WTW and knows only the aggregate distributions of WTP and WTW. The seller's problem is modeled as an M/M/N_s queueing model with multiclass customers and multidimensional information screening. We contribute to the literature by providing an optimal and efficient algorithm. Furthermore, we numerically find that customers with a larger waiting cost enjoys a higher scheduling priority, but customers with higher valuation do not necessarily get a higher scheduling priority. © 2015 Wiley Periodicals, Inc. Naval Research Logistics 62: 215–227, 2015     

多弹联合快速任务规划系统设计

简要分析了多弹联合快速任务规划的作战需求,提出了构建一套满足实时、快速、可视化、通用性要求的多弹联合快速任务规划系统的技术手段,阐述了其支持多种目标、多波次攻击以及多弹种联合任务规划的系统特性,最后介绍了系统的总体框架和软硬件组成。     

全面深化改革必须立足于“最大取灭实际”

坚持和发展中国特色社会主义,全面建成小康社会,离不开社会主义初级阶段这个最大实际。同样,全面深化改革,实现中华民族伟大复兴的中国梦,也离不开当前中国的“最大实际”。我们必须坚持“最大实际”的社会主义原则,必须把握“最大实际”的崭新成就基础,必须注重“最大实际”的时代诉求,在新的历史起点上全面深化改革。     

难加工材料3种优化指标的应用特性

采用刀具耐用度、切削里程、材料去除总量对同一组难加工材料进行正交试验,结果表明:采用刀具耐用度作为评价指标进行优化时,其结果往往是对应于最小的切削用量,高的刀具耐用度并不对应于高的切削能力和切削效率,优化结果存在较大的局限性;切削里程和材料去除总量在实际生产中分别代表已加工表面的形成量和总切削量,可以较好地反映切削参数与应用效果之间的关系,作为评价指标时,两者较刀具耐用度的评价更为有效。不同指标的评价结果不同,应用时需根据实际情况进行有针对性的选择。     

多媒体教学在学前教育中的应用

多媒体技术在全世界范围内引起了教育界的广泛关注,其在大学、中学、小学的应用成果丰硕,在学前教育领域却是刚刚起步。我们应抓住机遇,及时地把多媒体技术引进学前教育领域。采用与21世纪教育发展相适应的多媒体技术是学前教育现代化的任务之一,是学前教育改革的一项重要内容。     

论高校教务员工作能力的培养与提高

文章根据高校教务员的工作实践,结合自身的认识和体会,认为高校教务员须从思想品德、工作作风、业务水平和心理素质四个方面进行工作能力的培养与提高,从而做好高校教务管理工作。     

OFDM抗多径机理分析与系统仿真

抗多径衰落是正交频分复用(OFDM)系统的显著特点之一。具体分析了OFDM抗多径的机理,说明了两种不同情况下多径对信号频谱的影响,并提出了相应的减轻多径影响的方法。通过仿真分析验证了HiperLANType2标准规定的OFDM系统的抗多径性能,并提出了一些改善系统性能的方法。