飞越北极航行时间模型的研究

对飞越北极,缩短航线,节省航行时间问题进行了研究。采用了多种算法,对其有效性、适用性和复杂性进行分析讨论。假设"在旋转椭球体中,以通过球心和该椭球体上任意两点所构成的平面截此椭球体所得轨迹弧长作为曲面上两点间最短距离的近似值",在此基础上,通过运用数学软件计算得出结论:从北京出发,飞越北极抵达底特律的飞行时间可节省4.079 6h,从而使问题得到了进一步的验证。     

装甲兵作战仿真系统信息存储与回放

在分析DIS信息结构和数据库的基础上,对基于DIS的装甲兵作战仿真系统信息存储与回放进行了研究,并将其应用于装甲兵作战仿真实验室的建设中,收到了良好的效果.     

最大值指标截尾正态分布精度换算方法

提出了面向最大值指标的截尾正态分布精度换算方法,为最大值指标与常用精度指标间的精度换算以及真值测量系统精度指标的确定提供了参考依据。该方法假设系统输出序列中各观测点的合格概率服从对数截尾正态分布;根据给定最大值指标的置信水平及序列样本量,证明并推导了截尾正态分布之截尾上限、截尾下限、均值及标准偏差的计算公式,导出了最大值精度指标与1σ等常用精度指标间的换算关系;结合精密仪器有关理论给出了最大值指标下真值测量系统精度指标的确定方法。实例应用的实验结果表明,该方法是可行的。     

敦煌旅游业可持续发展研究初探

可持续发展已成为全球和地区经济发展的热点,对敦煌这样一个地处生态环境脆弱区且又正处于旅游发展成熟期的旅游地来说,探讨其可持续发展具有重要的战略意义。本文通过实地考察、对历年统计数据和调查问卷的分析,总结了敦煌旅游业发展概况,用SWTO分析法详细分析了敦煌旅游业发展现状的优势、弱点、机会与威胁,最后探讨了其可持续发展战略与对策,为敦煌旅游业的快速、持续、稳定发展提供参考。     

Sr2FeNbO6的晶体结构

系统地研究了Sr2FeNbO6的晶体结构,并利用步进扫描的X光数据成功地确定了Sr2FeNbO6的晶体结构,利用Rietveld方法精修出Sr2FeNbO6是空间群为Pnma(62)的正交结构,其中,晶胞参数分别为a=5.616 1A,b=7.971 7A,c=5.613 0A.     

Nb掺杂对双钙钛矿化合物Sr2FeMoO6电阻特性的影响

系统地研究了双钙钛矿结构氧化物Sr2FeMo1-xNbxO6中Mo位的Nb替代效应,发现Nb替代Mo可强烈抑制Sr2FeMoO6的金属导电性,并大大提高掺杂样品的电阻值和庞磁电阻特性,在5K下,Sr2FeMo0.6Nb0.4O6的庞磁电阻分别达到23%(1T)和31%(3T),在室温下,Sr2FeMo0.75Nb0.25O6的磁电阻分别达到4%(1T)和6%(3T).     

警报关联图：一种网络脆弱性量化评估的新方法

作为一种基于模型的脆弱性分析技术,攻击图能够识别网络中存在的脆弱性和它们之间的相互关系,分析出可能的攻击路径和潜在威胁.论文在攻击图的基础上提出了警报关联图的概念,利用攻击图中蕴含的脆弱性先验知识,将实时IDS警报信息映射到攻击路径,动态反映攻击进程和攻击者意图.在此基础上提出了一种基于警报关联图的网络脆弱性量化评估方法,通过计算警报关联边的权值对网络脆弱性进行动态分析,这种方法结合了静态的网络脆弱性先验知识和动态变化的攻击者意图,能有效反映网络脆弱性在动态攻击情况下的变化.     

Optimal inventory control policy for periodic‐review inventory systems with inventory‐level‐dependent demand

We consider a setting in which inventory plays both promotional and service roles; that is, higher inventories not only improve service levels but also stimulate demand by serving as a promotional tool (e.g., as the result of advertising effect by the enhanced product visibility). Specifically, we study the periodic‐review inventory systems in which the demand in each period is uncertain but increases with the inventory level. We investigate the multiperiod model with normal and expediting orders in each period, that is, any shortage will be met through emergency replenishment. Such a model takes the lost sales model as a special case. For the cases without and with fixed order costs, the optimal inventory replenishment policy is shown to be of the base‐stock type and of the (s,S) type, respectively. © 2012 Wiley Periodicals, Inc. Naval Research Logistics, 2012     

Opening behavior of PELE perforation on reinforced concrete target

Impact velocity (v0), target strength (fc) and target thickness (hc) are important factors affecting opening damage ((D)) of PELE penetration into RC target. In this paper, based on the three influence factors of v0, fc and hc, experimental and numerical simulation studies on PELE penetration into RC target were carried out. The study results show that: (1) Since interaction force (or penetration resistance) between pro-jectile and target is positively correlated with v0 and fc, with the increase of v0 and fc, deformation mode of jacket is changed from small bending deformation to large bending deformation and then to curling deformation. Therefore, the variation of jacket deformation mode causes opening diameter of RC target to increase first and then to decrease. It is found that the two factors approximately satisfy a quadratic function relationship, respectively. (2) For PELE projectile penetrating RC targets with thickness of 80—400 mm, the opening diameter of six sets of RC targets grows from 240 to 500 mm, and hc with (D) approximately satisfy a linear relationship. (3) Based on the above study results, the relationship be-tween two dimensionless parameters (I= (mv20/d31fc) and H= hc/l ) and dimensionless opening diameter ((D)/d1) was determined. Combined with the results of previous research, a dimensionless opening diameter model (D)/d1=f1(Q,G,I)f2(H) was established. By tests verified, the test results are all within ±10％error of the theoretical model, which verifies the accuracy of the model.     

Interval uncertain optimization for damping fluctuation of asegmented electromagnetic buffer under intensive impact load

Aiming at the problems of demagnetization effect of electromagnetic buffer (EMB) caused by high ve-locity under intensive impact load and the difficulty and error of machining composite thin-walled long tube, a segmented EMB is proposed. The inner tube and air-gap are divided into initial segments and the traversing segments. Through theoretical analysis, impact test and simulation, it can be found that the RRF curve has two peaks. Firstly, in order to reduce the resultant resistance force (RRF) peaks, the sensitivity analysis based on optimal Latin hypercube design (OLHD) and polynomial regression was performed. The results show that the smallest contribution ratio to the dynamic response is the seventh and ninth segments of the inner tube, which are less than 1％. Then, fully considering the uncertain factors, important parameters are selected for uncertain optimization after sensitivity analysis. The in-terval order and interval probability degree methods are used to establish interval uncertain optimiza-tion model of the RRF considering robustness. The model was solved using an interval nested optimization method based on radial basis function (RBF) neural network. Finally, the Pareto front is obtained and numerical simulation is performed to verify the optimal value. It indicates that the two kinds of RRF peak is obviously reduced, and the optimization object and strategy are effective.