A study on the surface overpressure distribution and formation of a double curvature liner under a two-point initiation

The formation mechanism of an EFP(explosively formed projectile) using a double curvature liner under the overpressure effect generated by a regular oblique reflection was investigated in this paper.Based on the detonation wave propagation theory,the change of the incident angle of the detonation wave collision at different positions and the distribution area of the overpressure on the surface of the liner were calculated.Three-dimensional numerical simulations of the formation process of the EFP with tail as well as the ability to penetrate 45# steel were performed using LS-DYNA software,and the EFP ve-locity,the penetration ability,and the forming were assessed via experiments and x-ray photographs.The experimental results coincides with those of the simulations.Results indicate that the collision of the detonation wave was controlled to be a regular oblique reflection acting on the liner by setting the di-mensions of the unit charge and maintaining the pressure at the collision point region at more than 2.4 times the CJ detonation when the incident angle approached the critical angle.The distance from the liner midline to the boundary of the area within which the pressure ratio of the regular oblique reflection pressure to the CJ detonation pressure was greater than 2.5,2,and 1.5was approximately 0.66 mm,1.32 mm,and 3.3 mm,respectively.It is noted that pressure gradient caused the liner to turn inside out in the middle to form the head of the EFP and close the two tails of the EFP at approximately 120μs.The penetration depth of the EFP into a 45# steel target exceeded 30 mm,and there was radial expansion between the head and tail of the EFE increasing the penetration resistance of the EFP.Therefore,the structural size of the unit charge and the liner can be further optimized to reduce resistance to increase the penetration ability of the EFP.     

One-step synthesis of FeO(OH) nanoparticles by electric explosion of iron wire underwater

In this study,we investigated electric explosion of iron wire in distilled water with different energy input adjusted by charging voltage.The as-prepared samples were characterized by X-ray diffraction (XRD),scanning electron microscopy (SEM),transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS),showing the presence of iron and multiple iron-based compounds oxides with contents influenced by the experimental conditions.In particular,pure FeO(OH) nanoparticles were obtained using electric explosion of iron wire with energy input of 1125 J at charging voltage of 15 kV.Analysis of discharge current and resistive voltage data indicate that the high energy input induced by strong plasma discharge at high charging voltage is a key factor to form FeO(OH).This study presents a one-step method to synthesize FeO(OH) nanoparticles using electric explosion of iron wire.     

Driving force coordinated control of an 8 ×8 in-wheel motor drive vehicle with tire-road friction coefficient identification

Because of the complexities of tire-road interaction,the wheels of a multi-wheel distributed electric drive vehicle can easily slip under certain working conditions.As wheel slip affects the dynamic per-formance and stability of the vehicle,it is crucial to control it and coordinate the driving force.With this aim,this paper presents a driving force coordination control strategy with road identification for eight-wheeled electric vehicles equipped with an in-wheel motor for each wheel.In the proposed control strategy,the road identification module estimates tire-road forces using an unscented Kalman filter al-gorithm and recognizes the road adhesion coefficient by employing the recursive least-square method.According to road identification,the optimal slip ratio under the current driving condition is obtained,and a controller based on sliding mode control with a conditional integrator uses this value for accel-eration slip regulation.The anti-slip controller obtains the adjusting torque,which is integrated with the driver-command-based feedforward control torque to implement driving force coordination control.The results of hardware-in-loop simulation show that this control strategy can accurately estimate tire-road forces as well as the friction coefficient,and thus,can effectively fulfill the purpose of driving force coordinated control under different driving conditions.     

The investigation of NTO/HMX-based plastic-bonded explosives and its safety performance

3-nitro-1,2,4-triazol-5-one (NTO) is the main component of insensitive munitions (IM) formulation because of its outstanding insensitive properties.In this paper,a series of NTO/HMX-based composite explosives were prepared and characterized.The study focuses on the effect of NTO on the performance of the formulations,especially the safety performance.The results revealed that the mechanical sensi-tivity of formulations was associated with NTO content,as well as the thermal conductivity,specific heat capacity and Arrhenius parameters.Then,the high amount of NTO using in formulation was proved to be helpful for NTO/HMX-based formulation to exhibit good thermal safety.Besides,by accelerating rate calorimeter (ARC) and a modified cook-offequipment,the pressure and pressure rise rate were proved as the important indicator for judging the thermal safety performance in confined spaces.Finally,the numerical simulation was used as a credible method for predicting the respond temperature of cook-off experiment.     

海拔对离心泵吸入性能的影响

海拔对离心泵吸入性能影响较大,但对应关系不明确。为定量分析海拔与离心泵吸入性能的关系,需进行泵高原工作吸入性能实验。海拔与真空度关系密切,利用控制泵吸入口真空度的方法,开展泵高原工作吸入性能模拟实验,获取各工况下泵吸入口持液率数据,并绘制曲线图。实验结果表明：海拔每升高500 m,泵吸入口持液率下降2%~5%;随着海拔的提升,泵吸入性能下降速率加快,工作状态趋于不稳定。     

基于改进SLP的军事物流基地设施平面布局研究

由于传统SLP方法的不足,在解决设施较多的军事物流基地布局问题上面临较大困难。为解决此问题,提出了改进SLP方法,以军事物流基地设施间综合相互关系为基础,构建平面布局模型,并确定目标函数和主要约束条件。随后对模型的求解进行遗传算法设计,并运用Matlab编程实现模型的求解,从而得出平面布局的最优解。最后以最优解为基础,结合限制条件进行修正,完成军事物流基地设施平面布局设计。     

疏水性纳米TiO2制备及其在菜籽油中的摩擦磨损性能

以纳米TiO2为原料、硬脂酸为表面改性剂,通过超声反应制备了疏水性纳米TiO2（SA-TiO2）;采用扫描电子显微镜（SEM）、红外光谱仪及接触角测量仪对其微结构进行了表征。以SA-TiO2为润滑油添加剂,在四球试验机上考察了其在菜籽油中的摩擦磨损性能,并利用SEM观察钢球表面磨斑形貌,用能谱仪（EDS）和X射线光电子能谱仪（XPS）分析了钢球表面磨斑的化学成分。结果表明：SA-TiO2为疏水性单分散球状颗粒,其平均直径约为20 nm;SA-TiO2能够提高菜籽油的抗磨减摩性能,当SA-TiO2的质量分数为1%,菜籽油的抗磨减摩性能达到最佳;钢球表面磨斑的EDS和XPS分析表明,纳米微粒在钢球摩擦表面形成了一层含菜籽油和SA-TiO2的吸附膜,在摩擦剪切作用下,发生摩擦化学反应生成了一层含钛、铁氧化物的边界润滑膜,这种边界润滑膜起到了良好的润滑作用。     

悬臂式围护桩受力性状与内力传递特征试验

为研究悬臂式围护桩结构的内力、弯矩、位移和嵌固段的变化规律及特点,结合西宁火车站综合改造工程,对该深基坑支护结构在不同开挖工况条件下悬臂桩的受力性状与内力传递特征进行现场动态测试试验。试验结果表明:悬臂桩的受力特征与理论值有所差异,在实际设计中可对其在配筋方式、混凝土强度设计、嵌固段长度等方面进行优化。试验结果可以有效优化桩身设计,为复杂基坑在开挖过程中的支护结构受力及变形提供参考性依据。     

多样化军事任务舆情演化及引导的仿真

针对海军遂行多样化军事任务所面临的日益复杂的社会舆论环境,采用基于Agent的建模理论与方法,建立了舆情演化过程的模型,并对其进行了仿真和分析。首先,提出了个体间观点交互的规则,建立了个体观点交互的舆情演化模型。其次,基于所建模型对不同条件下的舆情演化及引导进行了仿真实验与分析。仿真结果表明,模型的统计结果与实际舆情演化情况相符,具有较强的实际性。     

PID调节下H桥式逆变器离散建模及分岔现象

为研究PID调节下H桥式逆变器的非线性行为,选取逆变器输入电压为分岔参数,利用频闪映射法推导出PID调节下H桥式逆变器的离散数学模型.使用Matlab编程得到系统输出电流随输入电压变化的动态分岔图,通过数值仿真验证了离散数学模型的正确性.仿真结果表明频闪映射法适用于建立H桥式逆变器的离散数学模型;PID调节下H桥式逆变器存在分岔行为.研究结果可为建立PID调节下H桥式逆变器的离散数学模型提供参考.