回转体气层减阻降噪模型试验研究

在拖曳水池及大型循环水槽中,分别开展了中尺度及大尺度回转体模型喷气减阻试验研究,初步探讨了喷气方式、气流量、喷孔尺度变化对减阻率、推进性能及辐射噪声的影响规律.结果表明:回转体首部喷气能有效抑制辐射噪声、降低总阻力,但会引起推进性能的下降,推进性能下降率接近于减阻率.首部单独喷气的减阻效果优于首部、中部联合喷气的减阻效...     

一种陀螺与星敏感器组合定姿算法

提出了一种利用陀螺与星敏感器进行组合定姿的方案.为了避免状态及量测向量选取不当而造成的误差,首先采用四元数法对卫星的姿态进行描述;接着分析了陀螺与星敏感器系统的误差源,选取误差四元数及陀螺的系统误差作为组合系统的状态,获得了系统状态方程;同时采用星敏感器的量测作为系统量测,并利用新的数学变换构得到更为准确的量测方程;最...     

调炮精度检测中双经纬仪优化布站方法

针对“双经纬仪法”检测调炮精度中随机布站使测量系统达不到最佳测量精度的问题,提出了一种优化布站方法.根据火炮调炮范围确定了调炮精度检测中的测量区域,推导出了双经纬仪测量系统对于该测量区域的平均测量不确定度公式.结合某型火炮设计了基于遗传算法的具体优化过程,对测量系统的3个位置参数进行优化,得到最佳测量布局,并通过仿真试...     

探空火箭级间段的CAD系统

本文在CADKEY绘图软件包的支持下,开发了加筋圆柱结构CAD系统—Hcadx.此系统通过菜单引导用户的操作,可用经验公式或解析法作轴压稳定分析,用罚函数法优化参数,可以在不退出Hcadx的情况下启动CADKEY,自动绘制设计草图。此草图经过适当地编辑、修改、便可成为工程中能接受的工作图纸。     

一种基于地表类型的地杂波快速仿真方法

地杂波仿真技术对机载雷达的设计与研制有着重要影响.针对机载雷达地杂波仿真技术开展研究,提出了一种基于地表类型的地杂波快速仿真方法.该方法以数字地图和载机航线为两个重要输入,采用雷达波束照射区域的数字地图为有效先验地理环境信息进行仿真,提高了杂波仿真的逼真度;同时针对传统仿真方法中计算量较大的问题,优化了散射单元中天线功率增益的计算方法,减少了仿真时间.对所提方法进行了计算机仿真验证,结果表明,该方法能够仿真多种场景下与实测数据高度近似的地杂波.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dy-namic armor target under the complex background, the multi-line array infrared detection system is established based on the combination of the single unit infrared detector. The surface dimension features of ground armored targets are identified by size calculating solution algorithm. The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target. According to the characteristics of the target signal, a custom threshold de-noising function is proposed to solve the problem of signal preprocessing. The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage. The method solves the disadvan-tages of wide scanning interval and low detection probability of single unit infrared detection. By reducing the scanning interval, the number of random rendezvous in the infrared feature area of the upper surface is increased, the accuracy of the size calculating is guaranteed. The experiments results show that in the fuzzy recognition method, the size calculating is introduced as the feature operator, which can improve the recognition ability of the ground armor target with different shape size.     

武器装备体系贡献率研究现状分析

武器装备体系贡献率是全面、科学地评估武器装备在体系中发挥作用情况的指标,是目前装备论证领域的研究热点.收集了近年来国内在该领域的研究成果和国外与之相关的研究成果,通过对武器装备体系贡献率的概念内涵、属性特征、评估指标和方法的总结归纳,分析了研究中亟待解决的问题和面临的挑战,为武器装备体系贡献率的研究工作提供参考借鉴.     

Irreversible demagnetization mechanism of permanent magnets during electromagnetic buffering

The permanent magnets will be irreversibly demagnetized under high temperature and high velocity during the electromagnetic buffering. In this study, the magnetic field induced by eddy currents and the self-demagnetizing field of permanent magnet are taken into consideration together for demagnetiza-tion analyse. The magnetic Reynolds number is used to express the eddy currents demagnetization. The correction coefficient being expressed as the index of the air-gap width, the inner cylinder thickness, iron pole axial length and the permanent magnet demagnetization coefficient is introduced by magnetic path analysis to represent the self-demagnetization effect and the demagnetization extent. The electromag-netic buffer (EMB) prototype is tested under intensive impact loads of different strengths at room temperature. The accuracy of the nonlinear irreversible demagnetization finite element model is verified by demagnetization on damping force, velocity and displacement. Finally, high-velocity demagnetization and high-temperature demagnetization are analysed in order to obtain the distribution law of irre-versible demagnetization.