一种基于地表类型的地杂波快速仿真方法

地杂波仿真技术对机载雷达的设计与研制有着重要影响.针对机载雷达地杂波仿真技术开展研究,提出了一种基于地表类型的地杂波快速仿真方法.该方法以数字地图和载机航线为两个重要输入,采用雷达波束照射区域的数字地图为有效先验地理环境信息进行仿真,提高了杂波仿真的逼真度;同时针对传统仿真方法中计算量较大的问题,优化了散射单元中天线功率增益的计算方法,减少了仿真时间.对所提方法进行了计算机仿真验证,结果表明,该方法能够仿真多种场景下与实测数据高度近似的地杂波.     

Multi-objectives nonlinear structure optimization for actuator in trajectory correction fuze subject to high impact loadings

This paper presents an actuator used for the trajectory correction fuze, which is subject to high impact loadings during launch. A simulation method is carried out to obtain the peak-peak stress value of each component, from which the ball bearings are possible failures according to the results. Subsequently, three schemes against impact loadings, full-element deep groove ball bearing and integrated raceway, needle roller thrust bearing assembly, and gaskets are utilized for redesigning the actuator to effectively reduce the bearings' stress. However, multi-objectives optimization still needs to be conducted for the gaskets to decrease the stress value further to the yield stress. Four gasket's structure parameters and three bearings' peak-peak stress are served as the four optimization variables and three objectives, respectively. Optimized Latin hypercube design is used for generating sample points, and Kriging model selected according to estimation result can establish the relationship between the variables and objec-tives, representing the simulation which is time-consuming. Accordingly, two optimization algorithms work out the Pareto solutions, from which the best solutions are selected, and verified by the simulation to determine the gaskets optimized structure parameters. It can be concluded that the simulation and optimization method based on these components is effective and efficient.     

Study of high-speed-impact-induced conoidal fracture of Ti alloy layer in composite armor plate composed of Ti-and Al-alloy layers

In order to understand the mechanism of conoidal fracture damage caused by a high-speed fragment-simulating projectile in titanium alloy layer of a composite armor plate composed of titanium- and aluminum-alloy layers, the ballistic interaction process was successfully simulated based on the Tuler-Butcher and GISSMO coupling failure model. The simulated conoidal fracture morphology was in good agreement with the three-dimensional industrial-computed-tomography image. Further, three main damage zones (zones I, II, and III) were identified besides the crater area, which are located respectively near the crater area, at the back of the target plate, and directly below the crater area. Under the high-speed-impact conditions, in zone II, cracks began to form at the end of the period of crack formation in zone I, but crack formation in zone III started before the end of crack formation in zone II. Further, the damage mechanism differed for different stress states. The microcracks in zone I were formed both by void connection and shear deformation. In the formation of zone I, the stress triaxiality ranged from-2.0 to-1.0, and the shear failure mechanism played a dominant role. The microcracks in zone II showed the combined features of shear deformation and void connection, and during the for-mation process, the stress triaxiality was between 0 and 0.5 with a mixed failure mode. Further, the microcracks in zone III showed obvious characteristics of void connection caused by local melting. During the zone III formation, the triaxiality was 1.0-1.9, and the ductile fracture mechanism was dominant, which also reflects the phenomenon of spallation.     

Fuzzy recognition of missile borne multi-line array infrared detection based on size calculating

In order to improve the infrared detection and discrimination ability of the smart munition to the dy-namic armor target under the complex background, the multi-line array infrared detection system is established based on the combination of the single unit infrared detector. The surface dimension features of ground armored targets are identified by size calculating solution algorithm. The signal response value and the value of size calculating are identified by the method of fuzzy recognition to make the fuzzy classification judgment for armored target. According to the characteristics of the target signal, a custom threshold de-noising function is proposed to solve the problem of signal preprocessing. The multi-line array infrared detection can complete the scanning detection in a large area in a short time with the characteristics of smart munition in the steady-state scanning stage. The method solves the disadvan-tages of wide scanning interval and low detection probability of single unit infrared detection. By reducing the scanning interval, the number of random rendezvous in the infrared feature area of the upper surface is increased, the accuracy of the size calculating is guaranteed. The experiments results show that in the fuzzy recognition method, the size calculating is introduced as the feature operator, which can improve the recognition ability of the ground armor target with different shape size.     

武器装备体系贡献率研究现状分析

武器装备体系贡献率是全面、科学地评估武器装备在体系中发挥作用情况的指标,是目前装备论证领域的研究热点.收集了近年来国内在该领域的研究成果和国外与之相关的研究成果,通过对武器装备体系贡献率的概念内涵、属性特征、评估指标和方法的总结归纳,分析了研究中亟待解决的问题和面临的挑战,为武器装备体系贡献率的研究工作提供参考借鉴.     

Irreversible demagnetization mechanism of permanent magnets during electromagnetic buffering

The permanent magnets will be irreversibly demagnetized under high temperature and high velocity during the electromagnetic buffering. In this study, the magnetic field induced by eddy currents and the self-demagnetizing field of permanent magnet are taken into consideration together for demagnetiza-tion analyse. The magnetic Reynolds number is used to express the eddy currents demagnetization. The correction coefficient being expressed as the index of the air-gap width, the inner cylinder thickness, iron pole axial length and the permanent magnet demagnetization coefficient is introduced by magnetic path analysis to represent the self-demagnetization effect and the demagnetization extent. The electromag-netic buffer (EMB) prototype is tested under intensive impact loads of different strengths at room temperature. The accuracy of the nonlinear irreversible demagnetization finite element model is verified by demagnetization on damping force, velocity and displacement. Finally, high-velocity demagnetization and high-temperature demagnetization are analysed in order to obtain the distribution law of irre-versible demagnetization.     

Prediction of three-dimensional elastic behavior of filament-wound composites based on the bridging model

This work provides a method to predict the three-dimensional equivalent elastic properties of the filament-wound composites based on the multi-scale homogenization principle.In the meso-scale,a representative volume element(RVE)is defined and the bridging model is adopted to establish a theoretical predictive model for its three-dimensional equivalent elastic constants.The results obtained through this method for the previous experimental model are compared with the ones gained respec-tively by experiments and classical laminate theory to verify the reliability of this model.In addition,the effects of some winding parameters,such as winding angle,on the equivalent elastic behavior of the filament-wound composites are analyzed.The rules gained can provide a theoretical reference for the optimum design of filament-wound composites.     

An interface shear damage model of chromium coating/steel substrate under thermal erosion load

The Cr-plated coating inside a gun barrel can effectively improve the barrel's erosion resistance and thus increase the service life.However,due to the cyclic thermal load caused by high-temperature gun-powder,micro-element damage tends to occur within the Cr coating/steel substrate interface,leading to a gradual deterioration in macro-mechanical properties for the material in the related region.In order to mimic this cyclic thermal load and,thereby,study the thermal erosion behavior of the Cr coating on the barrel's inner wall,a laser emitter is utilized in the current study.With the help of in-situ tensile test and finite element simulation results,a shear stress distribution law of the Cr coating/steel substrate and a change law of the interface ultimate shear strength are identified.Studies have shown that the Cr coating/steel substrate interface's ultimate shear strength has a significant weakening effect due to increasing temperature.In this study,the interfacial ultimate shear strength decreases from 2.57 GPa(no erosion)to 1.02 GPa(laser power is 160 W).The data from this experiment is employed to establish a Cr coating/steel substrate interface shear damage model.And this model is used to predict the flaking process of Cr coating by finite element method.The simulation results show that the increase of coating crack spacing and coating thickness will increase the service life of gun barrel.     

Visual SLAM in dynamic environments based on object detection

A great number of visual simultaneous localization and mapping (VSLAM) systems need to assume static features in the environment. However, moving objects can vastly impair the performance of a VSLAM system which relies on the static-world assumption. To cope with this challenging topic, a real-time and robust VSLAM system based on ORB-SLAM2 for dynamic environments was proposed. To reduce the influence of dynamic content, we incorporate the deep-learning-based object detection method in the visual odometry, then the dynamic object probability model is added to raise the efficiency of object detection deep neural network and enhance the real-time performance of our system. Experiment with both on the TUM and KITTI benchmark dataset, as well as in a real-world environment, the results clarify that our method can significantly reduce the tracking error or drift, enhance the robustness, accuracy and stability of the VSLAM system in dynamic scenes.     

N、P源对微生物法处理石油烃效果的影响

在微生物法处理石油烃的过程中,微生物对N、P源的供给非常敏感,不同的微生物对不同的N、P源的生物利用度是不相同的,N、P源的选择对降解效果有较大影响,所以有必要对最佳的N、P源进行筛选。对N、P源的逸择和加入量对降解效果的影响进行了研究,确定了最佳的N、P源分别为(NH4)2SO4、KH2PO4。在(NH4)2SO4、KH2PO4的质量浓度分别为100mg／L和60mg／L时,废水中石油烃的去除率最高。