有源噪声控制的新近进展（Ⅱ）

从一般封闭空间、混响声场的有源控制及控制器结构与算法三个方面对有源噪声控制进行了评述,并对今后的研究趋势提出了展望。     

基于输出协方差配置的车辆振动控制系统设计

通过对车辆振动系统的振动特性分析,确定出系统反馈控制的设计目标。基于对［１］中状态协方差配置控制理论的推广,文中给出了控制器设计的具体方法,并举例说明该设计方法具有直接有效的特点     

AN UNIFIED METHOD AND THEORY FOR GRAMMAR DESIGN OF A CLASS OF CONTEXT-SENSITIVE LANGUAGES

ＡＮＵＮＩＦＩＥＤＭＥＴＨＯＤＡＮＤＴＨＥＯＲＹＦＯＲＧＲＡＭＭＡＲＤＥＳＩＧＮ　ＯＦＡＣＬＡＳＳＯＦＣＯＮＴＥＸＴ－ＳＥＮＳＩＴＩＶＥＬＡＮＧＵＡＧＥＳＬｉＺｈｏｕｊｕｎ;ＣｈｅｎＨｕｏｗａｎｇ;ＬｉＫａｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｏｍｐｕｔｅｒ...     

STUDY ON REAL1STIC TECHNOLOGY OF CONDITION MONITORING AND FAULT DIAGNOSTIC SYSTEM FOR SHIPPING POWER DEVICES

Condition monitoring and fault diagnosis is currently a very important problem in large-scale complicate power devices. Both scheme and realistic technology for monitoring system hardware and software have been present to solve the problem in this paper. The fault diagnostic model based on artificial neural network and state identification method based on fuzzy analysis are studied.     

某型空空导弹控制舱检测设备设计

对某型空空导弹控制舱检测设备进行了总体设计。采用8031单片机,提出各类参数的检测方案,并对系统采取了抗干扰措施。     

Approximation algorithms for minimizing total weighted completion time of orders on identical machines in parallel

We consider the problem of scheduling orders on identical machines in parallel. Each order consists of one or more individual jobs. A job that belongs to an order can be processed by any one of the machines. Multiple machines can process the jobs of an order concurrently. No setup is required if a machine switches over from one job to another. Each order is released at time zero and has a positive weight. Preemptions are not allowed. The completion time of an order is the time at which all jobs of that order have been completed. The objective is to minimize the total weighted completion time of the orders. The problem is NP‐hard for any fixed number (≥2) of machines. Because of this, we focus our attention on two classes of heuristics, which we refer to as sequential two‐phase heuristics and dynamic two‐phase heuristics. We perform a worst case analysis as well as an empirical analysis of nine heuristics. Our analyses enable us to rank these heuristics according to their effectiveness, taking solution quality as well as running time into account. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

NFPA1981标准2002年版的技术要求分析

NFPA1981是美国消防协会关于消防和应急开路自给式呼吸器的标准．介绍了谊标准的历史沿革、2002年版主要内客,讨论了新增的HUD、RICUAC,以及EOSTI的技术要求。     

基于磁流变液的舰载机拦阻过程模糊PID控制

针对舰载机拦阻过程的运动特性分析,建立了舰载机拦阻缓冲过程的力学模型与状态方程,通过对基于磁流变阻尼拦阻缓冲过程的分析,引入了位移和速度矢量作为磁流变缓冲拦阻控制系统的输入,完成基于模糊控制的舰载机拦阻缓冲过程控制。应用模糊PID控制器非线性拟合能力来适应舰载机着舰情况变化,并仿真验证建立的磁流变缓冲拦阻模糊PID算法具有较好的预测精度和应用范围。     

基于多点空间直线拟合的调炮精度检测方法

针对火炮身管上标记两个点检测调炮精度受制于单个空间点坐标测量精度的问题,提出通过增加身管上标记点的冗余数量来提高调炮精度的检测方法。应用最小二乘原理对多个空间点进行直线拟合,并采用Monte Carlo方法对身管指向的测量精度进行分析。结果表明:标记4个点、5个点、6个点和7个点与标记2个点(传统方法)相比,其身管指向的测量精度分别提高了约6%、18%、19%和21%。该方法适用于对调炮精度检测要求较高的场合,综合考虑工作效率和测量精度这两个因素,推荐标记5个点测量身管指向。     

PDSC评定柴油氧化安定性

为研究一种操作简便、检测快速的柴油氧化安定性评定方法,采用高压差示扫描量热法(PDSC)对柴油氧化安定性进行评定,通过单因素变量法分析了升温速率、恒容氧压、试样量对柴油氧化安定性的影响,确定了3种因素水平分别为8~12℃/min,2.5~4.5 MPa,2.5~3.5 mg。通过正交试验法得出升温速率对柴油氧化安定性的影响最大,恒容氧压的影响最小。方差分析表明在升温速率为8℃/min,恒容氧压为3.5 MPa,试样量为3.0 mg时,试验方法的区分性最佳。在该试验条件下,考察了5种油样的重复性,结果表明PDSC法的重复性满足标准要求。