A duality model for a generalized minmax program

We consider a generalized minmax programming problem, and establish, under certain weaker convexity assumptions, the Fritz John sufficient optimality conditions for such a problem. A dual program is introduced and using those optimality conditions duality theorems are proved relating the dual and the primal. Duality for the generalized fractional programming problem is considered as an application of the results proved.     

Minimizing quality control costs for laboratory instruments using information delays

This paper proposes the use of a cost-based statistical process control system for monitoring the quality of an unreliable analytical machine. In this environment the accuracy of the process cannot be determined by inspecting the output, but must be verified by analyzing standards of known values. The results demonstrate that a significant cost savings can be obtained if analytical results are placed in a “buffer” and their release delayed until the accuracy of the test can be assured. Results suggest the approach not only dramatically improves the quality of results reported but also significantly reduces the expected total cost of testing. © 1996 John Wiley & Sons, Inc.     

Algorithms for the constrained maximum-weight connected graph problem

Given a positive integer R and a weight for each vertex in a graph, the maximum-weight connected graph (MCG) problem is to find a connected subgraph with R vertices that maximizes the sum of the weights. The MCG problem is strongly NP-complete, and we study a special case of it: the constrained MCG (CMCG) problem, which is the MCG problem with a constraint of having a predetermined vertex included in the solution. We first show that the Steiner tree problem is a special case of the CMCG problem. Then we present three optimization algorithms for the CMCG problem. The first two algorithms deal with special graphs (tree and layered graphs) and employ different dynamic programming techniques, solving the CMCG problem in polynomial times. The third one deals with a general graph and uses a variant of the Balas additive method with an imbedded connectivity test and a pruning method. We also present a heuristic algorithm for the CMCG problem with a general graph and its bound analysis. We combine the two algorithms, heuristic and optimization, and present a practical solution method to the CMCG problem. Computational results are reported and future research issues are discussed. © 1996 John Wiley & Sons, Inc.     

Optimal control policies in service systems with limited information on the downstream stage

Existing models in multistage service systems assume full information on the state of downstream stages. In this paper, we investigate how much the lack of such information impacts jobs' waiting time in a two‐stage system with two types of jobs at the first stage. The goal is to find the optimal control policy for the server at the first stage to switch between type‐1 and type‐2 jobs, while minimizing the long‐run average number of jobs in the system. We identify control policies and corresponding conditions under which having no or partial information, the system can still capture the most benefit of having full information.     

The one‐warehouse multiretailer problem with an order‐up‐to level inventory policy

We consider a two‐level system in which a warehouse manages the inventories of multiple retailers. Each retailer employs an order‐up‐to level inventory policy over T periods and faces an external demand which is dynamic and known. A retailer's inventory should be raised to its maximum limit when replenished. The problem is to jointly decide on replenishment times and quantities of warehouse and retailers so as to minimize the total costs in the system. Unlike the case in the single level lot‐sizing problem, we cannot assume that the initial inventory will be zero without loss of generality. We propose a strong mixed integer program formulation for the problem with zero and nonzero initial inventories at the warehouse. The strong formulation for the zero initial inventory case has only T binary variables and represents the convex hull of the feasible region of the problem when there is only one retailer. Computational results with a state‐of‐the art solver reveal that our formulations are very effective in solving large‐size instances to optimality. © 2010 Wiley Periodicals, Inc. Naval Research Logistics, 2010     

Optimizing fishbone aisles for dual‐command operations in a warehouse

Unit‐load warehouses store and retrieve unit‐loads, typically pallets. When storage and retrieval operations are not coordinated, travel is from a pickup and deposit (P&D) point to a pallet location and back again. In some facilities, workers interleave storage and retrieval operations to form a dual‐command cycle. Two new aisle designs proposed by Gue and Meller (“Improving the unit‐load warehouse.” In Progress in Material Handling Research: 2006. Material Handling Industry of America, Charlotte, NC, 2006) use diagonal aisles to reduce the travel distance to a single pallet location by approximately 10 and 20[percnt] for the two designs, respectively. We develop analytical expressions for travel between pallet locations for one of these—the fishbone design. We then compare fishbone warehouses that have been optimized for dual‐command to traditional warehouses that have been optimized in the same manner, and show that an optimal fishbone design reduces dual‐command travel by 10–15%. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 54: 389–403, 2009     

Quality control chart design under Jidoka

We consider design of control charts in the presence of machine stoppages that are exogenously imposed (as under jidoka practices). Each stoppage creates an opportunity for inspection/repair at reduced cost. We first model a single machine facing opportunities arriving according to a Poisson process, develop the expressions for its operating characteristics and construct the optimization problem for economic design of a control chart. We, then, consider the multiple machine setting where individual machine stoppages may create inspection/repair opportunities for other machines. We develop exact expressions for the cases when all machines are either opportunity‐takers or not. On the basis of an approximation for the all‐taker case, we then propose an approximate model for the mixed case. In a numerical study, we examine the opportunity taking behavior of machines in both single and multiple machine settings and the impact of such practices on the design of an X – Q C chart. Our findings indicate that incorporating inspection/repair opportunities into QC chart design may provide considerable cost savings. © 2009 Wiley Periodicals, Inc. Naval Research Logistics 2009     

Design and control of agile automated CONWIP production lines

In this article, we study the design and control of manufacturing cells with a mix of manual and automated equipment, operating under a CONWIP pull protocol, and staffed by a single agile (cross‐trained) worker. For a three‐station line with one automated station, we fully characterize the structure of the optimal control policy for the worker and show that it is a static priority policy. Using analytical models and extensive simulation experiments, we also evaluate the effectiveness of practical heuristic control policies and provide managerial insights on automation configuration design of the line. This characterization of the worker control policy enables us to develop managerial insights into the design issues of how best to locate and concentrate automation in the line. Finally, we show that, in addition to ease of control and greater design flexibility, the CONWIP protocol also offers higher efficiency and robustness than does the push protocol. © 2008 Wiley Periodicals, Inc. Naval Research Logistics 2009     

An inventory model of incentives for on-time delivery in just-in-time purchasing contracts

This article formulates an analytic model of just-in-time purchasing contracts and compares the minimum cost solution with the cost attainable through vertical integration. The models use standard inventory theory cost parameters and decision variables. The results quantify the increase in cost of buying an item rather than making it. Optimal incentives are characterized when JIT purchasing contracts are used. When JIT purchasing is implemented, buffer inventories are typically reduced. This inventory reduction makes on-time delivery critical to the buyer; yet timeliness is controlled by the supplier. As an incentive to provide on-time delivery, the buyer offers the supplier a bonus for on-time delivery. The supplier chooses a flow time allowance based upon the bonus offered. First- and second-order conditions are characterized in general, and examples are provided for exponentially and uniformly distributed flow times. The delivery timeliness obtainable in a vertically integrated firm is determined and compared with timeliness obtainable between separate firms. This comparison indicates that buyers who choose to purchase materials from a separate firm are more likely to experience late deliveries. The relationship between the value of the bonus and the proportion of on-time deliveries is also considered. The bonus required to achieve the same probability of on-time delivery as under vertical integration is also determined. © 1993 John Wiley & Sons, Inc.