小型地面机器人链路通信距离测试方法设计

针对复杂环境条件下小型地面机器人链路通信距离测试方法问题,分析并指出了传统链路通信距离测试方法无法适用于地面机器人测试的原因,根据小型地面机器人使用环境和无线链路近地传播特点,选取对数距离路径损耗模型改进了传统测试方法,并在3种典型环境下进行了实地测试验证,结果表明:新方法能通过定量数据揭示被测机器人在不同环境下链路通信环境的差异性,适用于复杂环境下小型地面机器人链路通信距离测试.     

电磁炮炮管振动信号分析及处理方法

炮管发射振动是影响电磁炮发射稳定性及射击精度的关键因素,获取炮管振动信号有效数据,对优化其发射性能具有重要的意义.在对电磁炮炮管振动信号分析的基础上,提出了采用小波阈值去噪和最小二乘法相结合的信号处理方法来去除振动干扰信号,通过仿真实验,理论验证了该信号处理方法的有效性;设计测试系统进行振动实测实验,并使用该信号处理方法获得振动有效信号,进一步验证了该方法的有效性和实用性;计算得到炮管振动位移参量,为电磁炮设计、优化提供了理论依据.     

Research on the influences of confining pressure and strain rate on NEPE propellant: Experimental assessment and constitutive model

In order to study the influences of confining pressure and strain rate on the mechanical properties of the Nitrate Ester Plasticized Polyether (NEPE) propellant, uniaxial tensile tests were conducted using the self-made confining pressure system and material testing machine. The stress-strain responses of the NEPE propellant under different confining pressure conditions and strain rates were obtained and analyzed. The results show that confining pressure and strain rate have a remarkably influence on the mechanical responses of the NEPE propellant. As confining pressure increases (from 0 to 5.4 MPa), the maximum tensile stress and ultimate strain increase gradually. With the coupled effects of confining pressure and strain rate, the value of the maximum tensile stress and ultimate strain at 5.4 MPa and 0.0667 s⁻¹ is 2.03 times and 2.19 times of their values under 0 MPa and 0.00333 s⁻¹, respectively. Afterwards, the influence mechanism of confining pressure on the NEPE propellant was analyzed. Finally, based on the viscoelastic theory and continuous damage theory, a nonlinear constitutive model considering confining pressure and strain rate was developed. The damage was considered to be rate-dependent and pressure-dependent. The constitutive model was validated by comparing experimental data with predictions of the constitutive model. The whole maximum stress errors of the model predictions are lower than 4% and the corresponding strain errors are lower than 7%. The results show that confining pressure can suppress the damage initiation and evolution of the NEPE propellant and the nonlinear constitutive model can describe the mechanical responses of the NEPE propellant under various confining pressure conditions and strain rates. This research can lay a theoretical foundation for analyzing the structural integrity of propellant grain accurately under working pressure loading.     

An experiment evaluating how the tiny mass eccentricities in spin-stabilized projectiles affect the position of impact points

This study investigates and quantifies some possible sources affecting the position of impact points of small caliber spin-stabilized projectiles (such as 12.7 mm bullets). A comparative experiment utilizing the control variable method was designed to figure out the influence of tiny eccentric centroids on the projectiles. The study critically analyzes data obtained from characteristic parameter measurements and precision trials. It also combines Sobol's algorithm with an artificial intelligence algorithm—Adaptive Neuro-Fuzzy Inference Systems (ANFIS)—in order to conduct global sensitivity analysis and determine which parameters were most influential. The results indicate that the impact points of projectiles with an entry angle of 0° deflected to the left to that of projectiles with an entry angle of 90°. The difference of the mean coordinates of impact points was about 12.61 cm at a target range of 200 m. Variance analysis indicated that the entry angle — i.e. the initial position of mass eccentricity — had a notable influence. After global sensitivity analysis, the significance of the effect of mass eccentricity was confirmed again and the most influential factors were determined to be the axial moment and transverse moment of inertia (Izz Iyy), the mass of a projectile (m), the distance between nose and center of mass along the symmetry axis for a projectile (Lm), and the eccentric distance of the centroid (Lr). The results imply that the control scheme by means of modifying mass center (moving mass or mass eccentricity) is promising for designing small-caliber spin-stabilized projectiles.     

基于正交最小二乘估计的非线性时间序列的预测

在对非线性时间序列的短期预测中经常采用局部线性化的预测算法 ,原有的算法使用普通最小二乘法 (LS)估计近似线性模型的参数。对于存在噪声的数据 ,该算法的数值稳定性较差。本文在对非线性空间进行局部线性化的基础上 ,采用正交最小二乘方法 (OLS)对线性模型同时进行结构选择与参数辨识 ,改善了数值的病态特性 ,增强了算法的稳定性     

嵌银丝贫氧推进剂燃烧特性

采用试验发动机法 ,对嵌银丝铝镁贫氧推进剂的燃烧特性进行了研究 ,得到了低压下嵌银丝铝镁贫氧推进剂的燃烧规律 ,研究了银丝直径和贫氧推进剂配方对嵌银丝发动机燃速的影响。结果表明 ,嵌银丝贫氧推进剂的燃烧过程由初始工作段、稳定工作段和结束段组成 ;采用较粗的银丝 (0 3mm和0 4mm)可以显著提高贫氧推进剂的燃速 ;提高贫氧推进剂的基础燃速也是提高嵌银丝贫氧推进剂燃速的有效方法之一。     

军事装备学学科建设与发展研究

论述了我院军事装备学学科建设与发展的研究内容,包括学科方向调整与队伍优化、课程体系构建和课程内容优化、教材建设规划等.     

柱锥级联型爆磁压缩发生器的实验研究

研究了柱锥级联型爆磁压缩发生器。给出了主要实验结果。发生器的负载是3.5μH,最大电流是55.8KA,上升前沿是14.3μs,电压为30.5KV。平均电流放大倍数是6.4。     

大功率气体开关重复频率的理论分析

分析了影响气体开关重复频率的各因素,从理论上推导了开关耗能的恢复时间以及气体的冷却时间对重复频率的影响。提出了提高重复频率的方法。     

紧固件自动拆装过程仿真的设计方法研究

介绍了一种在AUTOCAD环境下,用参数化造型法,实现紧固件拆装过程自动仿真的设计方法.该方法把维修工具及紧固件的设计、工具维修性力学分析,以及维修过程的图形仿真合成在一起.工具及紧固件可以在给定点自动实现三维造型,并可连续进行过程仿真;当施加在紧固件上的外力超过其规定的受力范围时,将以图形方式自动显示,帮助操作者对维修操作过程进行判断.