滚动轴承故障智能诊断系统的研究

本文结合“滚动轴承故障智能诊断系统”的科研课题,介绍了智能诊断系统研制过程中轴承故障特征频率的近似计算、智能诊断报警参数的确定、报警门限值的确定、趋势预测及实验诊断结果分析。     

一种新型高效程控斩波器的设计

提出利用当前国际先进专用开关稳压电源集成芯片,设计高效、低纹波的新型新波器的原理及电路实现,并在实验条件下证明了本设计的工程适用性。     

舰船后传动装置的分析及其发展概况

介绍了后传动装置的主要元件及目前舰船典型的传动方式,在此基础上简述了今后的发展动态。     

动目标显示雷达改善因子的自动测试

本文对动目标显示雷达改善因子的自动测试系统进行了研究,给出一种新型的全数字式频率合成器,它能在雷达的中频上叠加频率范围为±70kHz、量化间隔为0.5Hz的多普勒频率。     

Numerical simulation study on penetration performance of depleted Uranium (DU) alloy fragments

Due to its high strength, high density, high hardness and good penetration capabilities, Depleted ura-nium alloys have already shined in armor-piercing projectiles. There should also be a lot of room for improvement in the application of fragment killing elements. Therefore, regarding the performance of the depleted uranium alloy to penetrate the target plate, further investigation is needed to analyze its advantages and disadvantages compared to tungsten alloy. To study the difference in penetration per-formance between depleted uranium alloy and tungsten alloy fragments,firstly, a theoretical analysis of the adiabatic shear sensitivity of DU and tungsten alloys was given from the perspective of material constitutive model. Then, taking the cylindrical fragment penetration target as the research object, the penetration process and velocity characteristics of the steel target plates penetrated by DU alloy frag-ment and tungsten alloy fragment were compared and analyzed, by using finite element software ANSYS/LS-DYNA and Lagrange algorithm. Lastly, the influence of different postures when impacting target and different fragment shapes on the penetration results is carried out in the research. The results show that in the penetration process of the DU and tungsten alloy fragments, the self-sharpening properties of the DU alloy can make the fragment head sharper and the penetrating ability enhance. Under the same conditions, the penetration capability of cylindrical fragment impacting target in vertical posture is better than that in horizontal posture, and the penetration capability of the spherical fragment is slightly better than that of cylindrical fragment.     

SDH－5／CLZ－Ⅰ型水深数据采集处理与串行发送装置

本文描述了ＳＤＨ－５型测深仪的基本工作原理,并针对国产ＳＤＨ系列模拟式水深测量仪器存在水深数据与定位数据记录时间不一致、水深测量数据判读误差大、自动化程度低、内业数据处理工作量大等缺陷,介绍了作者应用单片机技术研制的ＳＤＨ－５／ＣＬＺ－Ⅰ型水深数据采集、处理与串行发送装置。该装置可使ＳＤＨ－５型回声测深仪的上述缺陷得以弥补,并对提高ＳＤＨ系列模拟式水深测量仪的测量精度和自动化程度具有较大的实用价值。     

电力系统暂态稳定性的概率分析

本文对电力系统暂态稳定中的主要随机因素作出合理的假定后,提出了基于临界切除时间的暂态稳定性概率分析方法。这种方法计及电力系统中系统参数的随机性,计算例题表明了其可行性。     

Supply chain coordination with product line design and a revenue sharing scheme

Many manufacturers sell their products through retailers and share the revenue with those retailers. Given this phenomenon, we build a stylized model to investigate the role of revenue sharing schemes in supply chain coordination and product variety decisions. In our model, a monopolistic manufacturer serves two segments of consumers, which are distinguished by their willingness to pay for quality. In the scenario with exogenous revenue sharing ratios, when the potential gain from serving the low segment is substantial (e.g., the low‐segment consumers' willingness to pay is high enough or the low segment takes a large enough proportion of the market), the retailer is better off abandoning the revenue sharing scheme. Moreover, when the potential gain from serving the low (high) segment is substantial enough, the manufacturer finds it profitable to offer a single product. Furthermore, when revenue sharing ratios are endogenous, we divide our analysis into two cases, depending on the methods of cooperation. When revenue sharing ratios are negotiated at the very beginning, the decentralized supply chain causes further distortion. This suggests that the central premise of revenue sharing—the coordination of supply chains—may be undermined if supply chain parties meticulously bargain over it.     

分布式电驱动履带车辆容错分配控制策略

分布式电驱动履带车辆的驱动电机数目多、分配维数高,主电机故障时,会严重破坏行驶的平顺性和稳定性,影响驾驶安全.针对主电机故障时动力重分配的问题,采用一种规则与故障因子约束分配律相结合的分配方法,提出了一种容错分配控制策略,提高电机故障时的动力性和安全性.然后构建了Matlab与RecurDyn联合仿真模型,进行了主电机...     

面向故障预测与健康管理的传感器优化配置

传感器优化配置是保证装备故障预测与健康管理(Prognostics and Health Management,PHM)系统有效实现的基础.针对目前陆军装备保障中缺乏有效的传感器配置方法的现状,以某型防空导弹调平起竖系统为研究对象,建立了考虑传感器失效的PHM系统传感器优化配置模型.对导弹发射车调平起竖系统控制回路进行了分析,在此基础上形成系统的故障-传感器相关性矩阵;根据系统的指标要求建立传感器优化配置模型,采用蚁群算法求解;将结果与粒子群算法进行比较,表明利用蚁群算法取得了更优的配置方案,能够为PHM系统中装备的传感器优化配置提供有效指导.